Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

A polar macroporous sorbent for gas chromatography

Summary The gas chromatographic behaviour of crosslinked macroporous 2-hydroxyethyl methacrylate grafted with 2-methyloxazoline was investigated and the range of applicability of the copolymer was assessed. Retention index values were measured on this copolymer and compared with those obtained on the terpolymer 2-hydroxyethyl methacrylate-ethylene dimethacrylate-acrylonitrile. Rohrschneider constants and efficiency data for selected sorbates are given. The use of this type of polymer in the separation of various types of compounds is documented by various examples.     

红外光谱法分析淀粉接枝聚丙烯酸酯共聚物的各级结构

研究玉米淀粉接枝聚丙烯酸酯共聚物的各级结构，主要探讨去除均聚物和玉米淀粉侧链的方法。发现以环己烷为溶剂，用索氏萃取法除去均聚物比用苯萃取法时间短、效果好；用HCl酸解法除去淀粉侧链比用HClO4氧化法简单实用。用红外光谱进一步验证了各级结构的官能团，证实了所合成的共聚物是玉米淀粉接枝聚丙烯酸酯共聚物。     

亚麻等麻类纤维与乙烯基类单体接枝共聚反应的研究进展

近年来,乙烯基类单体与亚麻、大麻、苧麻等麻类纤维的接枝共聚反应已得到关注。本文着重总结接枝的引发方法,包括:1.辐射引发接枝;2.光引发接枝;3.Ce(Ⅳ)离子引发接枝;4.锰盐引发接枝;5.V(Ⅴ)离子引发接枝;6.Fenton's 试剂(Fe~(2+)-H_2O_2)引发接枝;7.过硫酸盐氧化还原引发体系接枝。上述各类引发体系及接枝纤维的结构与性能表征均在本文中作了述评。     

Williamson法合成两亲性聚醚砜酮-聚乙二醇接枝共聚物

含二氮杂萘酮结构的聚醚砜酮(PPESK)是一种新型的耐热可溶解工程塑料,其玻璃化温度高达263~305℃,可用来制造耐高温气体分离、超滤和纳滤膜,表现出优异的综合性能[1~4].然而,膜材料本身的疏水特性使PPESK膜在过滤操作中易遭受膜污染,导致膜性能下降,对膜材料进行亲水化改性以抑     

Preparation of HPMC–EA–DMAEMA nanosized latex

Nanosized copolymer latex of hydroxypropylmethylcellulose (HPMC) grafted with ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) has been prepared by acidifying submicron-sized latex particles synthesized by soap-free emulsion graft copolymerization using potassium persulfate (KPS) as initiator. The effects on the diameter of the latex particles of different conditions, for example concentration of DMAEMA, amount of HPMC, and ratio of HCl to DMAEMA for acidification, were investigated. It was found that increasing the mole ratio of HCl to DMAEMA to 1.0 and increasing the DMAEMA content both resulted in a decrease in particle diameter, whereas increasing the amount of HPMC resulted in larger particle sizes. Measurement by dynamic light scattering (DLS) revealed the diameter of the latex particles was >200 nm before acidification and <100 nm after acidification. Evidence of grafting was obtained by use of Fourier transform infrared (FTIR) spectroscopy. Transmission electron microscopy (TEM) was used to characterize the morphology of the copolymer particles before and after acidification.     

含双键侧基的聚氧乙烯与苯乙烯的接枝共聚物及其产物的性质

由环氧乙烷及烯丙基缩水甘油醚合成含双键侧基的聚氧乙烯用苯乙烯接枝共聚,接枝效率可达50％左右.接枝产物经纯化,用IR及~1H NMR表征.该产物与LiClO_4的络合物有较高的室温导电率,其PEO含量在70％及EO/Li=20/1时,25℃的导电率接近10~(-4)S/cm.此外,该接枝共聚物有较高的乳化能力.在Williamson固液反应中具有良好的相转移催化作用.     

Effect of dimethylaminoethyl methacrylate on the graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of an ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) monomer mixture onto water-soluble hydroxypropyl methylcellulose was investigated with potassium persulfate (KPS) as the initiator in an aqueous medium. The effects of introducing DMAEMA onto the graft copolymerization and the properties of the resulting latex that was produced were studied systematically. The optimum conditions for the graft copolymerization in terms of percentage of grafting and grafting efficiency were determined. The graft copolymer was characterized by Fourier transform infrared spectra, elemental analyses, nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering methods. The results suggest that the introduction of the DMAEMA monomer clearly accelerates the initial rate of the graft copolymerization, whereas the grafting parameters decrease significantly with increasing amounts of DMAEMA. These results can be attributed to the relatively large size of the DMAEMA molecule, its redox reaction with KPS, its hydrophilicity in water, and its chain transfer effect. The equilibrium humidity adsorption behavior and acid solubility of graft the copolymer films were also studied.     

富含纤维素类农作物秆与丙烯酸接枝共聚制备高倍率吸水树脂

用棉花秆、麦秆和玉米秆等富含纤维素类农作物秆与丙烯酸接枝共聚制备了高倍率的吸水树脂. 研究了不同水质(去离子水、自来水及雨水)对接枝产物吸水性能的影响. 采用棉花秆、麦秆、玉米秆与丙烯酸的接枝产物对去离子水的吸水倍率分别为930, 790和630 g/g, 对自来水的吸水倍率分别为670, 350和250 g/g, 用玉米秆/地瓜淀粉混合物制备的接枝产物对雨水的吸水倍率为540 g/g. 为棉花秆、 麦秆及玉米秆等富含纤维素的农作物秆的深加工与应用开辟了一条途径.     

甲壳胺接枝聚合反应的研究

本文是以过硫酸钾为引发剂，研究甲基丙烯酸甲酯（ＭＭＡ）与甲壳胺的接枝聚合反应．通过对不同脱乙酰度（ｄａ）甲壳胺（ＣＴＳ）的接枝聚合反应条件实验，研究了反应时间，温度，引发剂浓度和单体浓度对接枝聚合反应的影响，从中得到优选的反应条件．在相同条件下，比较不同脱乙酰度甲壳胺及Ｎ－取代甲壳胺的接枝聚合反应结果，表明：甲壳胺中氨基参与了接枝聚合反应的引发过程．