New tetra-aryl and bi-aryl porphyrins bearing 5,15-related fluorenyl pendants: the influence of arylation on fluorescence

The new tetra-aryl trans-A₂B₂-porphyrin with two fluoren-2-yl and two phenyl groups at the meso-positions has been synthesized and characterized, together with the analogous bi-aryl trans-A₂-porphyrin incorporating only the fluorenyl groups. The photophysical properties of these new compounds in solution are reported. The two additional phenyl groups in the A₂B₂ porphyrin stabilize the first excited singlet state by approximately 500 cm⁻¹ compared to the A₂ system, as revealed by the red-shift of the absorption Q bands and of the fluorescence emission bands. Both compounds display enhanced emission quantum yields compared to tetraphenylporphyrin: the augmentation is higher for the tetra-aryl than for the bi-aryl system, although not as high as for tetrafluorenylporphyrin. Fluorescence lifetime measurements of the series of four compounds suggest that the trends can be interpreted in terms of the larger influence of fluorenyl over phenyl groups in increasing the fluorescence radiative rate constant of the porphyrin, k_f.     

含苯并硒二唑聚咔唑/芴类共轭聚电解质及其前驱体的合成与性能研究

采用Suzuki偶合反应合成了一系列新型的咔唑、芴和2,1,3-苯并硒二唑的共聚物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-双(N,N-二甲基胺丙基)芴](PCzN-BSeD)及其相应的聚电解质衍生物——聚[3,6-(N-(2-乙基己基))咔唑-2,1,3-苯并硒二唑-9,9-(双(3′-(N,N-二甲基)-N-乙基铵)丙基)芴]二溴(PCzNBr-BSeD).在聚咔唑和芴中引入不同比例的2,1,3-苯并硒二唑(BSeD)单元,引起了由咔唑和芴链段向窄带隙苯并硒二唑(BSeD)单元有效的能量转移.通过对聚合物电致发光性能的研究,发现用聚(3,4-亚乙基二氧基噻吩)(PEDOT)或聚(3,4-亚乙基二氧基噻吩)/聚乙烯咔唑(PEDOT/PVK)作为空穴传输层时,器件的性能相差不大,表明咔唑的引入较明显的改善了聚合物的空穴注入性能.而且几乎所有的聚合物用高功函数铝作阴极的器件和用钡/铝作阴极的器件具有相近的发光性能,表明这类聚合物具有良好的电子注入性能.     

Bioactive Fluorenes. Part II. Unprecedented biologically active thiazole derivatives based-2,7-dichlorofluorene as competent DHFR inhibitors: Design,synthesis, and molecular docking approaches

In this study, a new series of (4-(2,7-dichloro-9H-fluoren-4-yl)thiazol-yl)acetamide derivatives was synthesized, and the new heterocycles were completely characterized, evaluated for their antimicrobial activity, and screened for cytotoxic activity against human lung carcinoma (A-549) and human breast carcinoma (MCF-7) cell lines. A molecular docking study was undertaken to identify the possible mode of action of the synthesized compounds, which suggested binding interactions with the dihydrofolate reductase (DHFR) active sites.Most of the synthesized compounds displayed meaningful activity against A-549 and MCF-7 cell lines when compared to 5-fluorouracil (5-FU), which was used as a reference drug. Furthermore, some of the prepared compounds exhibited potent antibacterial and antifungal activities. The highly pronounced biological activities of the compounds under investigation offer such species as promising future drug prospects which may find applications in the fields of biological and medicinal sciences.     

Simple and Efficient Method for Obtaining Fluorene and Spirobifluorene Bromide Derivatives

A mild, simple, and efficient synthetic procedure for the preparation of 2-monobromo-, 2,7-dibromo-, and 2,2′,7,7′-tetrabromo-substituted spirobifluorene derivatives and their key intermediates, 2-monobromo- and 2,7-dibromo-substituted fluorene compounds, has been developed. The oxidative bromination of fluorene and spirobifluorene was achieved using NaBr/H₂O₂ as the bromine source. High conversion of the starting materials was achieved together with good selectivities under optimized reaction conditions.     

Efficient white emitting copolymers based on bipolar fluorene-co-dibenzothiophene-S,S-dioxide-co-carbazole backbone

Efficient white light emitting polymers were synthesized based on poly(9,9-dioctylfluorene-co-dibenzothiophene-S,S-dioxide) as blue emitter and a bisphenylamine functionalized 2,1,3-benzothiadiazole (DPABT) as red emitter. It was found that the incorporation of hole-transporting carbazole moiety into polymer main chain could effectively reduce the hole injection barriers, which can lead to distinctly improved charge balance in the emissive layer. Additionally, the hole-transporting carbazole units may form efficient bipolar host with electron-transporting dibenzothiophene-S,S-dioxide units. The white light emitting diodes based on single polymer PFSOCzDPABT showed the maximum luminous efficiency of 3.3 cd/A with the maximum luminance of 10282 cd/m2 , and the luminous efficiency showed only 24% roll off at current density of 400 mA/cm2 . These Commission Internationale d’Enclairage (CIE) coordinates of the devices changed slightly with the driving voltages increasing from 8 V to 12 V, and were very close to National Television System Committee (NTSC) standard white light emission of (0.33, 0.33). The results indicated that the incorporating bipolar host and low band gap DPABT unit was a promising way to achieve efficient single white light emitting copolymers.     

Solvent control of product diversity in palladium-catalyzed addition of arylboronic acid to aryl aldehydes

In Pd-catalyzed arylboronic acid addition to aryl aldehydes, the expected carbinol or asymmetrical ether can be obtained as the major product by altering aqueous solvent composition. Exploiting this methodology with 2-formylbiphenyls as reaction partner, a fluorene scaffold can be readily constructed in two steps.     

Novel tri-carbazole modified fluorene host material for highly efficient solution-processed blue and green electrophosphorescent devices

A series of novel solution-processable small-molecule host materials: 2DPF-TCz, 2SBF-TCz, 27DPF-TCz, and 27SBF-TCz comprising a fluorene monomer as the rigid core and tri-carbazole as the periphery have been designed and synthesized, and their optical, electrochemical, and thermal properties have been fully characterized. The host materials exhibit high glass-transition temperatures (231–310 °C) and high triplet energy levels (2.61–2.73 eV). High-quality amorphous thin films can be obtained by spin-coating the host materials from solutions. It is found that the HOMO level of the host materials can be tuned by linking the tri-carbazole unit to the 2,7 positions of the fluorine core, resulting in appropriate HOMO energy levels (−5.36 to −5.23 eV) for improved hole-injection in the device. Solution-processed blue and green electrophosphorescent devices bases on the developed host materials exhibit high efficiencies of 21.2 and 34.8 cd A⁻¹, respectively.     

9H-Fluorene-9-carbodithioic acids and dithioates. First isolation and characterization of a gem-enedithiol

[2,7-Bis(octyloxy)fluoren-9-yliden]methanedithiol (1a) and its tautomer 2,7-bis(octyloxy)-9H-fluorene-9-carbodithioic acid (2a) can be isolated in pure form from the reaction of monolithiated 2,7-bis(octyloxy)-9H-fluorene with CS₂ followed by protonolysis with aqueous HCl. Compound 1a is the first isolated and unambiguously characterized gem-enedithiol. When 9H-fluorene, 2,7-di-tert-butyl-9H-fluorene or 2,7-dimethoxy-9H-fluorene are used, the same synthetic procedure yields the unstable dithioic acids, which can be converted to the piperidinium salts.     

Synthesis and photoluminescence stability of non-conjugated polymers based on fluorene and benzoxazole

A kind of non-conjugated blue luminescent polymer based on fluorene and benzoxazole was synthesized via solution condensation polymerization from 2,2-bis(3-amino-4-hydroxyphenyl)-propane and 2,7-dicarboxyl-9,9-dioctyl-fluorene and was characterized with H NMR, FT-IR, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), UV-vis absorption and photoluminescence (PL) spectroscopy. The polymer displayed the maximum photoluminescence emission peak at 415 nm and showed high PL spectroscopic stability. The green-to-blue emission intensity ratio I_Green/I_Blue is only 0.073 even after thermal annealing at 150 °C for 30 h. After being exposed to UV light for 30 min, no bathochromic emission or obvious crosslink is observed. The common phenomenon of greenish blue emission of fluorene-based polymer around 525 nm has been effectively restrained in this polymer by introducing the isopropylidene group into the backbone of polymer.     

Fluorene-bridged polyphenylquinoxalines with high solubility and good thermal stability: Synthesis and properties

<正>A novel fluorene-bridged tetraketone monomer,9,9-bis[(4-benzilyloxy)phenyl]fluorene(FLTK) was synthesized and characterized.The tetraketone was polymerized with various aromatic tetraamines to afford a series of polyphenylquinoxalines(PPQs).The obtained polymers were found to be soluble in common organic solvents such as N-methyl-2-pyrrolidone(NMP),chloroform and m-cresol.Flexible and tough PPQ films obtained by spin-casting their NMP solutions exhibited tensile strengths higher than 60 MPa.The films also demonstrated good thermal stability up to 500℃in nitrogen and glass transition temperatures higher than 280℃.In addition,the PPQ films exhibited good hydrolytic stability. High surface and volume resistivity retentions were achieved for the films after immersion or boiling in water for 24 h.