Observation of the multiple halogenation of peptides in the electrospray ionization source

The chlorination of peptides and proteins is an important posttranslational modification, which is a physiological signature of an enzyme myeloperoxidase and can serve as a potential biomarker of some diseases (Parkinson's disease, Alzheimer's disease, etc.). The quantification of the chlorinated peptides has been very challenging in part due to their low levels and artifacts associated with sample preparation. One of the most convenient and promising methods to detect and investigate the chlorinated peptides in the biological samples is the electrospray ionization (ESI) mass spectrometry coupled to the fragmentation techniques (collision‐induced dissociation and electron capture dissociation/electron transfer dissociation). We have shown that if the chlorine anions are present in the solution, then the peptide can undergo the chlorination during the ESI ionization. The effect was found to depend on the values of electric potentials of metal parts of the ESI interface. It was found that the grounding of ESI syringe results in the formation of an additional electric loop leading to the electrolytic production of Cl₂ and as a consequence the hypochlorous acid inside the ESI needle. Hypochlorous acid reacts with amino groups of peptides and proteins producing chloramine or causing the protein cleavage. In the paper, it is shown on the example of the solution of the several peptides in the presence of HCl that by manipulating the ESI syringe potential, it is possible to create complexes with up to five Cl atoms for sample peptides when the ESI is operated in the positive mode. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved ion optics for introduction of ions into a 9.4‐T Fourier transform ion cyclotron resonance mass spectrometer

Enhancements to the ion source and transfer optics of our 9.4 T Fourier transform ion cyclotron resonance (ICR) mass spectrometer have resulted in improved ion transmission efficiency for more sensitive mass measurement of complex mixtures at the MS and MS/MS levels. The tube lens/skimmer has been replaced by a dual ion funnel and the following octopole by a quadrupole for reduced ion cloud radial expansion before transmission into a mass‐selective quadrupole. The number of ions that reach the ICR cell is increased by an order of magnitude for the funnel/quadrupole relative to the tube lens/skimmer/octopole. Copyright © 2015 John Wiley & Sons, Ltd.     

A New Approach for Synthesis of Low‐moisture Glycidyl Azide Polymer

In this work, low‐moisture glycidyl azide polymer (GAP) was successfully prepared using a modified two‐step method. The modified method resembles the structure of the classical two‐step method, which is widely used to prepare the GAP. Firstly, epichlorohydrin (ECH) is polymerized into polyepicholorohydrin (PECH), which is subjected afterward to azidation step using sodium azide (NaN₃). Interestingly, minimizing the water content in the final GAP product, which is a challenging when dealing with GAP as a rocket propellant binder, was effectively achieved by utilizing low boiling point solvents instead of the relatively high boiling point Dimethyl formamide (DMF), monitoring the volatility of ECH and controlling the exothermicity of the reaction. Prepared GAP samples were investigated using Fourier transformer infra‐red (FT‐IR), gel‐permeation chromatography (GPC) and elemental analysis apparatus (CHNS) were used to characterize the product. The moisture % in the final product was examined using the Karl‐Fisher Technique. Results showed the successful preparation of GAP with low water content (<0.01 %), high average molecular weight (> 2000 g · mol^–1), 42.82 % nitrogen, a viscosity of 3484 cP at 20 °C, yield ranges between 95–98 % and a polydispersity index of 1.2. The prepared GAP is promising for replacement of the classical GAPs in the energetic materials applications.     

Improvement in semipermeable membrane performance of wholly aromatic polyamide through an additive processing strategy

A new concept for the method to provide semipermeability in ultrathin and single‐component wholly aromatic polyamide membranes has been developed for the first time. It was found that water molecules could permeate through the membrane prepared not from polyamides containing flexible ether, bulky binaphthyl, or fluorene rigid units, but one with carboxylic acid groups under a reverse osmosis mode. However, the enhancement of water transport properties by introducing the hydrophilic group of polyamide was not substantial. Therefore, polyamide membranes were prepared from the solution containing aqueous additives in order to weaken hydrogen bonds between polymer chains and thereby to suppress the aggregation of the polymer chains. As a result, water flux was dramatically improved with slightly improved NaCl rejection. Our analyses based on attenuated total reflectance Fourier transform infrared spectroscopy and solid‐state carbon polarization and magic angle spinning nuclear magnetic resonance (¹³C CPMAS NMR) spectroscopy confirmed that the aggregation of polymer chains due to the hydrogen bonds among the amide linkages was suppressed by the co‐ordination of the aqueous additives to the amide linkage. The state of water in the membranes analyzed by differential scanning calorimetry also supported the formation of pores. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1275–1281     

Metabolic study of paeoniflorin and total paeony glucosides from Paeoniae Radix Rubra in rats by high‐performance liquid chromatography coupled with sequential mass spectrometry

A clear understanding of the metabolism of Traditional Chinese Medicines is extremely important in their rational clinical application and effective material foundation research. A novel and reliable strategy was performed to find more metabolites of paeoniflorin, determine the metabolites of total paeony glucosides (TPG) by means of determining those metabolites of paeoniflorin, and compare the metabolism differences between paeoniflorin and TPG by intragastric administration. This strategy was characterized as follows. Firstly, the rats were divided into two groups (the paeoniflorin group and the TPG group) to find differences in metabolism mechanisms between paeoniflorin and TPG. Secondly, UPLC‐FT‐ICR MS and UPLC‐Q‐TOF MS² were applied to obtain accurate molecular weight and structural information, respectively. Thirdly, the metabolites were tentatively identified by a combination of data‐processing methods including mass defect screening, characteristic neutral loss screening and product ion screening. Finally, a comparative study was employed in the metabolism of paeoniflorin and TPG. Based on the strategy, 18 metabolites of paeoniflorin (including four new compounds) and 11 metabolites of TPG (including two new compounds) were identified. In all of the identified metabolites of paeoniflorin, two metabolites in rat plasma, four metabolites in rat urine and six metabolites in rat feces were found for the first time after paeoniflorin administration. The results indicate that hydrolyzation of the ester bond and glucosidic band and conjugation with glucuronide were the major metabolic pathways of paeoniflorin. The metabolites of paeoniflorin and TPG in rat plasma, urine and feces have been detected for the first time after intragastric administration. The results may contribute to a better understanding of the metabolism mechanism and provide a scientific rationale for researching the material basis of paeoniflorin and TPG in vivo.     

Well‐defined non‐linear polyethylene‐based macromolecular architectures

Polyethylene (PE)‐based 3‐ and 4‐miktoarm star [PE(PCL)₂, PE(PCL)₃] and H‐type [(PCL)₂PE(PCL)₂] block copolymers [polycaprolactone (PCL)] were synthesized by a combination of polyhomologation, chlorosilane chemistry, and ring opening polymerization (ROP). The following steps were used for the synthesis of the miktoarm stars: (a) reaction of a hydroxy‐terminated polyethylene (PE‐OH), prepared by polyhomologation of dimethylsulfoxonium methylide with a monofunctional boron initiator followed by oxidation/hydrolysis, with chloromethyl(methyl)dimethoxysilane or chloromethyltrimethoxysilane; (b) hydrolysis of the produced ω‐di(tri)methoxysilyl‐polyethylenes to afford ω‐dihydroxy‐polyethylene (difunctional initiator) and ω‐trihydroxy‐polyethylene (trifunctional initiator); and (c) ROP of ɛ‐caprolactone with the difunctional (3‐miktoarm star) or trifunctional macroinitiator (4‐miktoarm star), in the presence of 1‐tert‐butyl‐2,2,4,4,4‐pentakis(dimethylamino)‐2λ⁵,4λ⁵‐catenadi(phosphazene) (t‐BuP₂). The H‐type block copolymers were synthesized using the same strategy, but with a difunctional polyhomologation initiator. All intermediates and final products were characterized by HT‐GPC, ¹H NMR and FTIR analyses. Thermal properties of the PE precursors and all final products were investigated by DSC and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2129–2136     

Automated in-syringe single-drop head-space micro-extraction applied to the determination of ethanol in wine samples

A novel approach of head-space single-drop micro-extraction applied to the determination of ethanol in wine is presented. For the first time, the syringe of an automated syringe pump was used as an extraction chamber of adaptable size for a volatile analyte. This approach enabled to apply negative pressure during the enrichment step, which favored the evaporation of the analyte. Placing a slowly spinning magnetic stirring bar inside the syringe, effective syringe cleaning as well as mixing of the sample with buffer solution to suppress the interference of acetic acid was achieved.     

Thermal dissociation of ions limits the degree of the gas‐phase H/D exchange at the atmospheric pressure

We present the application of the extended desolvating capillaries for increasing the degree of the gas‐phase hydrogen/deuterium exchange reaction at atmospheric pressure. The use of the extended capillaries results in the increase of the time that ions spend in the high pressure region, what leads to the significant improvement of the efficiency of the reaction. For the small protein ubiquitin, it was observed that for the same temperature, the number of exchanges increases with the decrease of the charge state so that the lowest charge state can exchange twice the number of hydrogen than the highest one. With the increase of the temperature, the difference decreases, and eventually, the number of exchanges equalizes for all charge states. The value of this temperature and the corresponding number of exchanges depend on the geometric parameters of the capillary. Further increase of the temperature leads to the thermal dissociation of the protein ion. The observed b/y fragments are identical to those produced by collision‐induced dissociation performed in the ion trap. Copyright © 2017 John Wiley & Sons, Ltd.