Sensitive CE-MS method for monitoring of riociguat and desmethylriociguat levels in human serum

Riociguat is novel antihypertensive drug for treatment of pulmonary hypertension. As such, it is still being tested in many clinical and pharmacokinetic trials. Existing methods that determine serum riociguat and desmethylriociguat (DMR) are based solely on liquid chromatography with mass spectrometry. Therefore, we present a novel capillary electrophoresis with mass spectrometry method (CE-MS) for their determination in human serum as alternative method for ongoing trials. Complete resolution of both analytes was achieved by means of pH optimization of ammonium formate background electrolytes that are fully compatible with ESI/MS detection. Simple liquid-liquid extraction was used as sample pretreatment. The calibration dependence of the method was linear (in the range of 10–1000 ng/mL), with adequate accuracy (90.1–114.9%) and precision (13.4%). LOD and LOQ were arbitrarily set at 10 ng/mL for both analytes. Clinical applicability was validated using serum samples from patients treated with riociguat in pharmacokinetic study and the results corresponded with reference HPLC-MS/MS values. Capillary electrophoresis proved to be sensitive and selective tool for the analysis of riociguat and DMR.     

Determination and correlation of the solubility of tricin in water and ethanol mixtures

The solubility of tricin in water and ethanol mixtures was measured over the temperature range of (288.15 to 328.15) K. The concentrations of tricin in the aqueous mixtures were assayed by the ultraviolet spectrophotometric method. The experimental solubility data indicated that the solubility of tricin increases with an increase in temperature and an enrichment in ethanol content. The two models, including the modified Apelblat equation and λh equation were used to correlate the experimental solubility data. The calculated solubility of tricin shows good agreement with the experimental results. Additionally, the estimation of thermodynamic properties including the activity coefficients, dissolution enthalpy, and entropy were obtained from the experimental data. Within the studied temperature range the dissolution process of tricin is endothermic, and the driving force is the entropy.     

Synthesis and characterization of CuO nanoparticles utilizing waste fish scale and exploitation of XRD peak profile analysis for approximating the structural parameters

In this research, we strived to utilize waste fish scale (labeo rohita) for synthesizing CuO nano-particles (CuO NPs), which gained much attention due to its distinctive properties and versatile applications. Upon the heat treatment, the collagen content of the fish scale got transformed into gelatin which in turn converted the precursor material into CuO NPs. The X-Ray diffraction (XRD) analysis confirmed the formation of CuO NPs and revealed the structure to be of monoclinic lattice. The structural parameters i.e. crystallite size, lattice parameters, microstrain, dislocation density was evaluated for the synthesized CuO NPs using the XRD data. Scherrer’s Method (SM), Scherrer Equation Average Method (SEAM), Linear Straight Line Method (LSLM), Straight Line Passing the Origin Method (SLPOM), Monshi Scherrer Method (MSM), Williamson-Hall Method (WHM), Size-Strain Plot Method (SSPM), Halder-Wagner Method (HWM) was exploited for the estimation of crystallite size. According to the calculations, the crystallite size was found to be 87 nm, 41 nm, 1980 nm, 62 nm, 66 nm, 28 nm, 13 nm, 13 nm respectively and the dislocation density was found to be 1.32 × 10^-4, 5.95 × 10^-4, 0.002 × 10^-4, 2.60 × 10^-4, 2.29 × 10^-4, 12.75 × 10^-4, 59.17 × 10^-4 and 59.17 × 10^-4 respectively. UV–Vis absorption analysis also confirmed the formation of CuO NPs based on the absorption peak at 262 nm (λ_max) and Tauc Plot method was used to calculate the optical band gap which was 3.84 eV. Functional group, especially the Cu-O bonding was confirmed by the Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) data. Field Emission Scanning Electron Microscopy (FESEM) showed three different shapes of CuO NPs which was also confirmed by Transmission Electron Microscopy (TEM). Particle size was determined based on FESEM and TEM image using imageJ software and also by the Dynamic Light Scattering (DLS) technique. Thermal analysis showed a four stage weight loss in case of Thermogravimetric (TGA) analysis and three conversion steps was observed in Differential Scanning Calorimetric (DSC) analysis. Such synthesis pathway is evidently green and facile for synthesizing CuO NPs with potentiality of various applications and also utilization of waste fish scale is a perquisite.     

Nanostructured Hexacyanoferrate Intercalated Ni/Al Layered Double Hydroxide Modified Electrode as a Sensitive Electrochemical Sensor for Paracetamol Determination

An electrochemical sensor for paracetamol (PC) based on the hexacyanoferate(III) intercalated Ni−Al layered double hydroxide (Ni−Al−HCF) was presented. The as‐prepared LDH structurally and morphologically was characterized by scanning electron microscopy, X‐ray diffraction, and Fourier transform IR. Electrochemical studies revealed that Ni−Al−HCF film modified glassy carbon (GC) electrode exhibited remarkable electrocatalytic activity toward the oxidation of paracetamol. The electrochemical behavior of PC on the Ni−Al−HCF film was investigated in detail. Under optimum experimental conditions, the electrocatalytic response of the modified GC electrode was linear in the PC concentration range 3×10⁻⁶⁻–1.5×10⁻³ mol L⁻¹, with a detection limit of 8×10⁻⁷ mol L⁻¹ (S/N=3), using hydrodynamic amperometry. In addition, the modified electrode exhibited good reproducibility, long‐term stability and anti‐interference property. The fabricated sensor was successfully applied to determination of PC in various pharmaceutical preparations such as tablets, oral solution, and oral drops. Finally, the method was validated by the analysis of paracetamol spiked human serum samples, and good recoveries were obtained in the range of 99.2–103 %.     

Parabola-Hyperbola P-H kinetic model for NR sulphur vulcanization

A Parabola-Hyperbola (P-H) kinetic model for NR sulphur vulcanization is presented. The idea originates from the fitting composite Parabola-Parabola-Hyperbola (P-P-H) function used by the authors in [1,2] to approximate experimental rheometer curves with the knowledge of a few key parameters of vulcanization, such as the scorch point, initial vulcanization rate, 90% of vulcanization, maximum point and reversion percentage. After proper normalization of experimental data (i.e. excluding induction and normalizing against maximum torque), the P-P-H model reduces to the discussed P-H composite function, which is linked to the kinetic scheme originally proposed by Han and co-workers [3]. Typically, it is characterized by three kinetic constants, where classically the first two describe incipient curing and stable/instable crosslinks and the last reproduces reversion.The powerfulness of the proposed approach stands into the very reduced number of input parameters required to accurately fit normalized experimental data (i.e. rate of vulcanization at scorch, vulcanization at 90%, maximum point and reversion percentage), and the translation of a mere geometric data-fitting into a kinetic model. Kinetic constants knowledge from simple geometric fitting allows characterizing rubber curing also at temperature different from those experimentally tested.The P-H model can be applied also in the so-called backward direction, i.e. assuming Han's kinetic constants known from other models and deriving the geometric fitting parameters as result.Some existing experimental data available, relying into rheometer curves conducted at 5 different temperatures on the same rubber blend are used to benchmark the P-H kinetic approach proposed, in both backward and forward direction. Very good agreement with previously presented kinetic approaches and experimental data is observed.     

Kinetic Study on Models of the Noncatalyzed Reaction Between α, ω -Dicarboxypolyamide-11 and α, ω -Dihydroxypolyoxyalkylenes

The kinetics of the noncatalyzed reaction between α, ω -dicarboxypoly-amide-11 and α, ω -dihydroxypolyoxyalkylenes is investigated by using the reactions of 11-dodecylamidoundecanoic acid with 1-dodecanol, 2-tridecanol, α-dodecyl-ω-hydroxypolyoxyethylene or α-dodecyl-ω;-hydroxypolyoxypropylene as models. Kinetic data fit a 3rd overall order (2 in acid and 1 in alcohol). Rate constants and activation parameters are determined and compared.     

Emodin,A Naturally Occuring Anthraquinone: Its Isolation and Spectrophotometric Determination in Rumex Cyprius Plant

A new method for isolation and specrophotometric determination of emodin is presented. Emodin was isolated by thin layer chromatography (tlc) and column chromatography (cc) techniques, as an orange long crystalline substance. Emodin exhibits two absorption maxima, at 420 and 520 nm. Stability of the color and the effect of pH were studied. Beer's law is obeyed in the range 2–30 ppm.

The method is applied to the determination of emodin in roots, stems, and leaves of Rumex cyprius plant.     

Isolation and Determination of Volatile Organic Compounds from Water by Dynamic Purge-and-Trap Technique Coupled with Capillary Gas Chromatography

The preconcentration technique of purge-and-trap has been investigated in the present work for quantitative adsorption of volatile organic pollutants purged from water samples. A dynamic purging device with variable volume size has been constructed and tested to purge different concentrations of organic compounds. With Tenax GR as the adsorbent, a dynamic purge-and-trap technique was developed combining on-column preconcentration procedures using ambient trapping/thermal desorption/cryogenic focusing/back-flash injection prior to separation and determination using capillary gas chromatography. Various aromatic compounds in water were determined, giving linear working ranges over five orders of magnitude from 0.02 to 5000 µg/L. The analytical procedures were optimized under the assistance of ultrasonication with results validated for the determination of organic contaminants in underground water and tap water, giving over 93% recoveries and a detection limit of 0.01 µg/L, two orders of magnitude lower than those obtained using commercial available instruments with on-line configuration to minimize cross-contamination. The technique provides a potential automated method for in situ monitoring of volatile organic compounds in water.     

Determination of Nitrite via Reaction with Pyridine-4-Carboxylic Acid Hydrazide

Abstract

Nitrite is determined by its reaction with a measured but excessive amount of pyridine-4-carboxylic acid hydrazide in acid medium (when the two substances react in a 1:1 molar ratio) and evaluation of the surplus hydrazide by titration with chloramine-T in the presence of acidified potassium bromide, the end-point being shown by the decolorization of the methyl red indicator. Nitrate, copper(II), mercury(II), etc. are found not to interfere, and the determination of nitrite in the presence of diazotized aromatic amines is demonstrated.     

Investigation on Thioguanine by Solid Surface Fluorimetry

ABSTRACT

The solid surface fluorimetry (SSF) for the determination of 6-thioguanine (6-TG) has been presented. Several experimental conditions such as the type of solid substrate, pH of the medium, rigidity state of substrate, drying condition etc. were optimized. The new and highly sensitive procedure has a linear range of 3.3～668.6ng/spot with the correlation coefficient 0.999, the relative standard deviation (RSD) 3.16% and the limit of detection 0.47 ng/spot corresponding to three times the standard deviation of the blank (n=11). The recovery of standard 6-TG added to urine was over the range of 97.4-107.4%. The method is simple, rapid and sensitive and can be applied to analysis of urine without interference.