Green synthesis and characterization of Fe doped ZnO nanoparticles and their interaction with bovine serum albumin

Herein we report an eco-friendly and cost efficient synthesis of Fe doped ZnO (TPFZO) nanoparticles using the extract of Thespesia polpulanea flowers as a stabilizing agent. The synthesized NPs have been characterized by XRD, FT-IR, UV-DRS, SEM, EDAX and TEM studies. The synthesized NPs were found to have the crystallite size in the range of 30–60 ​nm. The calculated band gap energies for ZO and TPFZO nanoparticles were 3.00 ​eV and 1.97 ​eV respectively. The size distribution of the ZO and TPFZO obtained from TEM were observed to be lying in the range 50–120 ​nm and 4–22 ​nm respectively. The interaction of TPFZO NPs with bovine serum albumin (BSA) has been studied using fluorescence and absorption titration methods. The results indicated that the nanoparticles quenched the BSA fluorescence at 340 ​nm via static quenching mode having a bimolecular quenching rate constant value of 6.21 ​× ​10¹³ Lmol⁻¹s⁻¹.     

Ranolazine-functionalized CuO NPs: efficient homogeneous and heterogeneous catalysts for reduction of 4-nitrophenol

In the present study copper oxide nanoparticles (CuO NPs) were synthesized using a hydrothermal method with ranolazine as a shape-directing agent. Ranolazine-functionalized CuO NPs were characterized by various analytical techniques such as scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The SEM pattern confirmed the morphology of ranolazine-functionalized CuO NPs with well-defined rice-like structures. FTIR spectroscopy confirmed the interaction between CuO NPs and ranolazine. The XRD analysis indicated that the structure of ranolazine-functionalized CuO NPs was monoclinic crystalline and the size ranged between 9 and 18 nm with an average particle size of 12 nm. The smaller size range of CuO NPs gave a large surface area that enhanced the efficiency of these catalysts employed for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in the H ₂ O system. In homogeneous catalysis, results showed that 50 μL of CuO NPs was required in the presence of NaBH4 for 99% reduction of 4-NP in 240 s. On the other hand, for heterogeneous catalysis, 0.5 mg of CuO NPs was used in the presence of NaBH4 for 99% catalytic reduction of 4-NP to 4-AP in 320 s. The rate of reaction for homogeneous catalysis and heterogeneous catalysis was determined from the plots of In(Ct /C0) of 4-NP versus time (s), which showed good linearity with values of 1.3 × 10 ^-2 and 8.8 × 10 ^-3 s ^-1 . respectively. The high-quality catalytic efficiency, good reusability, nontoxic nature, and low cost are favorable properties of the synthesized CuO NPs for use as efficient catalysts for reduction of 4-AP to 4-NP in both homogeneous and heterogeneous media.     

Effect of metal ions on structural,morphological and optical properties of nano-crystallite spinel cobalt-aluminate (CoAl2O4)

The bright blue nano crystallite cobalt aluminate (CoAl₂O₄) was synthesized by sol–gel method using a mixture of chelating agent of glycerol and citric acid. The effects of changing (0.05, 0.075, 0.10, 0.25, 0.50, and 0.75 mol/L) metal ion concentration on the structural, morphological and color properties of synthesized CoAl₂O₄ were characterized by using X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), Nanoparticle size analyzer, Simultaneous Thermal Analyzer (STA), UV–vis absorption spectroscopy, and CIE-LAB colorimetric analysis. From the X-ray peak profile analysis, the crystallite size was measured by Debye-Scherrer (D-S) equation, and three different models presenting average crystallite sizes between 88.3 and 125.4 nm.The average lattice strain, dislocation density, lattice constant, cell volume, and zeta potential were between 0.00021 and 0.0058, (1.73 to 12.8) × 10¹⁴ (lines/m²), 8.10658 to 8.11181 Å, 533.60 to 533.81 Å³, ?56.4 to ? 63.5 mV, respectively. Using UV–vis absorption spectroscopy, the band gap was calculated from Kubelka-Munk method, and the values of band gap increasing from 1.82 to 1.84 eV, respectively. The reflectance spectra and the CIE-L*a*b* values of cobalt aluminate is also measured which confirmed the formation of blue nano crystallite cobalt aluminate.     

Green synthesis of copper oxide nanoparticles CuO NPs from Eucalyptus Globoulus leaf extract: Adsorption and design of experiments

The study is concerned with synthesizing copper oxide nanoparticles with leaf extract Eucalyptus Globoulus. The results of scanning electron microscopy (SEM) and dynamic light scattering (DLS) revealed that the green synthesized copper oxide nanoparticles are spherical and have a mean particle size of 88 nm, with a negative zeta potential of ?16.9 mV. The XRD graph showed the crystalline and monoclinic phases of CuO nanoparticles. The average crystalline size around 85.80 nm was observed by the Debye–Scherrer formula. The adsorption characteristics of the nano-adsorbents were investigated using methyl orange, and the adsorption efficiency at room temperature attained 95 mg/g. Copper oxide nanoparticles (CuO NPs) adsorb methyl orange dye most effectively at pH 4.5 when the dye is applied in quantities of 0.04 g/50 mL. Box–Behnken design (BBD) in response surface methodology (RSM) was used to optimize various process parameters, such as pH solution (X₁: 2 – 11), adsorbing dose (X₂: 0.01 – 0.08 g/L), [MO] dye concentration (X₃: 10 – 80 mg/L). Overall, the adjusted coefficient of determination (R²) value of 0.99 demonstrated that the used model was quite appropriate, and the chosen RSM was effective in optimization the decolorization conditions of MO.     

The synthesis and photochemical properties of amphiphilic phenylazonaphthalenes

Three novel amphiphilic phenylazonaphthalenes, namely, 6-(4-(4-octylphenylazo)naphthoxy)hexanoic acid, 6-(4-(4-dodecylphenylazo)naphthoxy)hexanoic acid, 6-(4-(4-hexadecylphenylazo)naphthoxy)hexanoic acid, were synthesized by diazo coupling, etherification and hydrolysis reactions successively. The kinetic studies of the trans–cis isomerization indicated that about 95% of the trans isomers of these compounds in chloroform solutions were transformed to cis isomers under the irradiation of near-ultraviolet light (380±30 nm) observed from UV–Vis spectra. In the dark condition, the cis isomers could reversibly convert to trans isomers following the first-order kinetics at the rates of 4.9×10^-4, 5.7×10^-4, 7.7×10^-4 S^-1, respectively.     

Structural,thermal, optical and conductivity studies of Co/ZnO nanoparticles doped CMC polymer for solid state battery applications

In this study, a simple chemical precipitation method was used to synthesize ZnO: Co²⁺ as nanoparticles. The solution casting technique was used for the preparation of polymer films of Carboxymethyl cellulose (CMC) doped with different contents (0.5, 1.5, 3, and 5 wt%) of ZnO/Co NPs. As shown by the X-ray diffraction, the average size of ZnO/Co crystallite of the NPs is 25.6 nm. Meanwhile, the addition of ZnO/Co reduced the semi-crystallinity of CMC. The Fourier transform infrared (FTIR) confirmed the interaction between the ZnO/Co NPs and the polymer CMC. The direct and indirect band gap (Eg) was reduced from (5.32–5.01 eV and 5.20 to 4.99 eV respectively) with the increase in ZnO/Co NPs content up to 3 wt% after this content the Eg is increased as shown by the UV–Vis spectra. In addition, the results of TGA displayed the decomposition of the nanocomposite to be little compared to that of the pure CMC indicating the success of fabrication of products. The improvement of the ionic conductivity was noticed upon the addition of ZnO/Co NPs into the polymer CMC system which can be explained in terms of an increase in amorphicity as shown by the impedance spectroscopic study. It was found that the optimum ionic conductivity (3.209 × 10⁻⁶ Scm⁻¹) at ambient temperature was higher for the sample containing 1.5 wt% ZnO/Co NPs with highest of amorphicity and the lowest total loss of weight. Therefore, the improvements in optical properties, thermal stability, and AC conductivity which were observed represent a strong support for the use of the nanocomposite films in the solid state battery applications.     

Spectrophotometric determination of sildenafil citrate in pure form and in pharmaceutical formulation using some chromotropic acid azo dyes

Two simple and highly sensitive spectrophotometric methods were developed for the quantitative determination of the drug sildenafil citrate (SC), Viagra, in pure form and in pharmaceutical formulations, through ion-associate formation reactions (method A) with mono-chromotropic acid azo dyes, chromotrope 2B (I) and chromotrope 2R (II) and ion-pair reactions (method B) with bi-chromotropic acid azo dyes, 3-phenylazo-6-o-carboxyphenylazo-chromotropic acid (III), bis-3,6-(o-hydroxyphenylazo)-chromotropic acid (IV), bis-3,6-(p-N,N-dimethylphenylazo)-chromotropic acid (V) and 3-phenylazo-6-o-hydroxyphenylazo-chromotorpic acid (VI). The reaction products, extractable in methylene chloride, were quantitatively measured at 540, 520, 540, 570, 600 and 575 nm using reagents, I–VI, respectively. The reaction conditions were studied and optimized. Beer's plots were linear in the concentration ranges 3.3–87.0, 3.3–96.0, 5.0–115.0, 2.5–125.0, 8.3–166.7 and 0.8–15.0 μg mL^?1 with corresponding molar absorptivities 1.02 × 10⁴, 8.34 × 10³, 6.86 × 10³, 5.42 × 10³, 3.35 × 10³ and 2.32 × 10⁴ L mol^?1 cm^?1 using reagents I–VI, respectively. The limits of detection and Sandell's sensitivities were calculated. The methods were successfully applied to the analysis of commercial tablets (Vigoran) and the recovery study reveals that there is no interference from the common excipients that are present in tablets. Statistical comparison of the results was performed with regard to accuracy and precision using Student's t- and F-tests at 95% confidence level. There is no significant difference between the reported and proposed methods with regard to accuracy and precision.     

Electrochemical properties modulation of Zinc oxide nanoparticles

The influence of zinc salts precursors (nitrate, acetate, chloride) on the electroactivity of the synthesised Zinc oxide nanoparticles (ZnONPs) was investigated using Glassy carbon ZnONPs modified electrode (ZnONPs films). The precipitation synthesised ZnONPs ‘s optical, morphological, size and Structural properties were assessed by usual spectroscopical technique. The XRD data confirmed synthesis of The ZnONPs which were predominately Zincite except for the nitrate product (zincite, ZHNH). All the NPs were of smaller size with the highest diameter size of 0.25 μM and lowest 0.066 μM for nitrate and chloride NPs respectively. All had good electroactivity, with rate constants (k_s) above 1 × 10⁻² indicating fast reversible reactions, values ranged from 0.6152 to 0.7515 for Zn(NO₃) and Zn(CH₃COO)₂ respectively. Excellent opto-electric properties were observed with the nitrate product that had the highest band gaps (∼3.7 eV), DPV current(,7.57 × 10⁻⁷ A) ΔE_p, diffusion coefficient (D_e) (3.120 × 10⁻¹(cm^2/s (Ariyanta et al., 2022) [5]) and rate constant (0.62 S^-1). In addition it had the lowest resistance as indicated by the R_s value (1.13 kΩ) below the bare electrode value lowest R_ct (444.77 kΩ) and CPE (3.00 × 10⁻⁶ F). For fabrication of sensors and batteries where low resistance and conductivity are essential, ZnONPs using Nitrate is ideal.     

Novel electrosynthesis of CdS/FeS nanocomposite-modified poly(o-phenylenediamine) with views to their use as a biosensor for Escherichia coli

This article proposes a new electrochemical sensor for Escherichia coli (E. Coli) composed of poly(o-phenylenediamine) (PoPD) and CdS/FeS nanocomposites (PoPD|CdS/FeS). The preparation of the modified electrodes used for this purpose and their subsequent use as a sensor comprise a simple, fast and reproducible technique. The characterization of the CdS/FeS nanocomposites and their subsequent inclusion on PoPD was performed by X-ray diffraction (XRD), Raman, field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HR-TEM) and computational methods; For the nanocomposites an average size of 100 nm was obtained after applying a reduction potential for 5 s over the polymeric matrix. The electrochemical characterizations confirmed that the inclusion of the nanocomposites improved the amperometric response, allowing the developed material to be used as an electrochemical sensor for E. Coli. The figures obtained gave the linear equation j = -6.89 × 10⁻¹⁴ × CFU + 5.64 × 10⁻⁵, with an R² of 0.995, for 10 replicates. Furthermore, the limit of detection (LOD) was 6.1 × 10⁵ CFU/mL, and the limit of quantification (LOQ) was 6.1 × 10⁶ CFU/mL.     

Structural and optical characterization of Zn doped TiO<Subscript>2</Subscript> nanoparticles prepared by sol–gel method

Undoped and zinc-doped TiO₂ nanoparticles (Ti_1−xZn_xO₂ where x = 0.00–0.10) were synthesized by a sol–gel method. The synthesized products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and UV–VIS spectrometer. XRD pattern confirmed the tetragonal structure of synthesized samples. Average grain size was determined from X-ray line broadening using the Debye–Scherrer relation. The crystallite size was varied from 10 to 40 nm as the calcination temperature was increased from 350 to 800 °C. The incorporation of 3–5 mol% Zn²⁺ in place of the Ti⁴⁺ provoked a slight decrease in the size of nanocrystals as compared to undoped TiO₂. The SEM and TEM micrographs revealed the agglomerated spherical-like morphology with a diameter of about 10–30 nm and length of several nanometers, which is in agreement with XRD results. Optical absorption measurements indicated a blue shift in the absorption band edge upon 3–5 mol% zinc doping. Direct allowed band gap of undoped and Zn-doped TiO₂ nanoparticles measured by UV–VIS spectrometer were 2.95 and 3.00 eV at 550 °C, respectively.     

Spectrofluorimetric determination of fexofenadine hydrochloride in pharmaceutical preparation using silver nanoparticles

A novel sensitive fluorimetric method was investigated for the assay of fexofenadine hydrochloride (FEX) using silver nanoparticles (NPs) as a fluorescence probe. The NPs, which were prepared by chemical reduction of silver nitrate with sodium borohydride (reducing agent) in aqueous solution (without organic stabilizers) were water soluble, stable and had narrow emission band. The addition of drug to NPs solution caused considerable quenching of the emission band of silver NPs, which was likely due to the complexation of the drug to silver NPs. Under the optimum conditions, the quenched fluorescence (FL) intensity was linear with the concentration of FEX in the range of 1 × 10^?7 to 2.5 × 10^?5 mol L^?1 (0.9985) with a detection limit of 1.2 × 10^?8 mol L^?1. The quenching mechanism of the studied drug on the emission band of silver NPs was explained by Stern–Volmer law. The developed method was applied to FEX determination in a pharmaceutical formulation (allegra tablets) and biological fluids (human serum and urine).     

Research article green synthesis of zirconium oxide nanoparticles (ZrO2NPs) using Helianthus annuus seed and their antimicrobial effects

Monoclinic Zirconia (ZrO₂NPs) nanoparticles were successfully prepared by non-toxic and low-cost production using green synthesis analysis from the methanolic extract of Helianthus annuus (sunflower) seeds as the reducing agent. Mechanism of the chemical reaction has shown the reduction and which confirmed the formation of nanoparticles via chemical bonding in the IR spectrum at 502-498 ​cm^-1 ZrO₂ nanoparticles were characterized as sharp peak at 275 ​nm in the UV-Vis spectrum with 3.7eV in photon energy bandgap, it confirms the monoclinic crystal structure, as well as x-ray diffractometry, reveals zirconia crystallite is 40.59 ​nm. The internal morphology of crystal structure is exhibited by Scanning Electron Microscopy (SEM), and Transmission Electron Microscope (TEM). The stability of nanoparticles is represented in terms of zeta potential (-9.32 ​mV) and particle size distribution (~331 ​nm). Biosynthesized ZrO₂NPs were indicated as superior antimicrobial activity for biomedical applications.     

Efficient photodegradation of methyl orange and bactericidal activity of Ag doped ZnO nanoparticles

In the present work, silver-doped ZnO (Ag–ZnO NPs) with different concentrations of silver ions (0.3, 0.5, 1.0 and 1.5 mol %) were synthesized by using a simple co-precipitation method. The Ag–ZnO NPs were primarily characterized by XRD, FT-IR, SEM, EDS, TEM, UV–Vis. DRS, PL and BET surface area. The XRD analysis of Ag–ZnO NPs shows a wurtzite structure and optimized Ag–ZnO NPs (1.0 mol %) exhibit a lower crystallite size of 15.96 nm than that of bare ZnO (19.07 nm). Optical study shows a decrease in band gap from 3.13 to 2.97 eV as the concentration of Ag ions increases from 0.3 to 1.5 mol%. TEM images reveal the spherical shape particle with sizes ranging between 10 and 15 nm. From the multipoint BET plot, the surface area of Ag–ZnO NPs found 38.06 m²/gwhich is higher than the ZnO NPs (34.48 m²/g). The photocatalytic study demonstrated that the Ag–ZnO NPs (1.0 mol %) has an excellent photodegradation efficiency of Methyl Orange (96.74%)with a 26% increment as compared to bare ZnO (70.47%). Furthermore, the bactericidal activity of Ag–ZnO NPs (1.0 mol %) was investigated against four different bacterial strains. The results explored that the Gram-negative bacteria (E. coli and P. vulgaris) are more sensitive than Gram-positive (S. aureus and B. cereus) to Ag–ZnO NPs. Overall, the anticipated material is economical and reusable for photodegradation and antibacterial activity.     

Synthesis,crystal structure,and DNA cleavage activity of a dinuclear nickel(II) complex with a macrocyclic ligand

A new Ni(II) complex, namely [Ni₂(OAc)L]·ClO₄·H₂O, was synthesized by [2 + 2] cyclo-condensation between 2,6-diformyl-4-methylphenol and N,N-bis(3-aminopropyl)-4-methoxybenzylamine (amba) in the presence of nickel(II) and characterized by spectroscopy, elemental analysis, and X-ray single crystal diffraction. The interactions of the complex with DNA have been measured by spectroscopy and viscosity measurements. Absorption spectroscopic investigation reveals intercalative binding of the Ni(II) complex with DNA, with a binding constant of 2.6 × 10⁴ M⁻¹. Fluorescence spectroscopy shows that the Ni(II) complex can displace ethidium bromide and bind to DNA, with a quenching constant of 7.57 × 10³ M⁻¹. The appearance of increased CD bands near 245 and 275 nm gives evidence for effective complex DNA binding. The agarose gel electrophoresis studies show that the complex displays effective DNA cleavage activity in the absence of any external agents.     

Biosynthesis,characterization, biological and photo catalytic investigations of Elsholtzia blanda and chitosan mediated copper oxide nanoparticles

Bio synthesis of nanoparticles using plant parts has gained considerable attention, given the fact that the method is green, environment friendly, cheaper, simple and involves no hazardous substances. The present study involves the green synthesis of copper oxide nanoparticles (CuO NPs) using chitosan and the aqueous leaf extract of Elsholtzia blanda, an aromatic medicinal herb. The synthesized E.blanda-chitosan mediated copper oxide nanoparticles (CPCE) and E. blanda mediated copper oxide nanoparticles (PCE) were subjected to different characterization techniques, Ultraviolet–visible (UV–Vis), Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray Analysis (EDAX), High Resolution Transmission Electron Microscopy (HRTEM) and Selected Area Electron Diffraction (SAED). The absorbance peaks in UV–Vis spectroscopy at 286 nm and 278 nm for CPCE and PCE respectively indicated the formation of nanoparticles. TEM and SEM employed for studying the surface morphology showed rod-like and spherical morphology bearing average size of 47.71 nm for CPCE and 36.07 nm for PCE. The antibacterial activities of the prepared nanoparticles were tested against Enterococcus faecalis, Staphylococcus aureus, Escherichia coli and Salmonella typhi by agar well diffusion method. The results indicate that CuO NPs possess effective antibacterial potential against all tested bacteria with a maximum zone of inhibition of 18 mm for Enterococcus faecalis. Antioxidant studies revealed the highest DPPH scavenging activity of 89% at 25 μg/mL concentration of the nanoparticles. The percentage of the photo catalytic degradation of Congo red was found to be 95% after 10 h.     

Ultra-small CuS Nanoparticles as Peroxidase Mimetics for Sensitive and Colorimetric Detection of Uric Acid in Human Serum

As the main final products of the purine metabolism in human body, uric acid (UA) usually presents in serum and urine. Thus, the level of UA in biology is closely related to human health. In this work, the ultra-small CuS nanoparticles (NPs) were demonstrated to possess intrinsic peroxidase-like activity towards 3,3',5,5'-tetramethylbenzidine (TMB) substrate in the presence of H₂O₂, which yielded the blue oxidized TMB (oxTMB) with strong absorption at 653 nm. Furthermore, H₂O₂ could be produced by the enzymatic reaction between UA and uricase to yield the blue oxTMB with the peroxidase mimetics activity of CuS NPs, which provided a sensitive and colorimetric method for UA detection with a linear range from 1.0 × 10^?6 M to 1.0 × 10^?4 M and a detection limit of 1.0 × 10^?7 M. Moreover, the proposed method was successfully applied to the determination of UA in human serum samples, which supplied a similar result to the clinical method.     

Method for determination of fluoroquinolones based on the plasmonic interaction between their fluorescent terbium complexes and silver nanoparticles

We report on a fluorometric method for the determination of the fluoroquinolones levofloxacin (LEV) and moxifloxacin (MOXI). It is based on the Tb(III)-sensitized luminescence that is plasmonically enhanced by silver nanoparticles (Ag NPs). The emission of the Tb(III) complexes has maximum at 545?nm after excitation at 284?nm and is strongly enhanced in the presence of the colloidal Ag NPs. Under optimum experimental conditions, luminescence intensity increases linearly with the concentration in the range from 4.16?×?10^-17-3.59?×?10^-15?M of LEV, and from 4.98?×?10^-17-2.49?×?10^-15?M for MOXI with correlation coefficients of 0.9996 and 0.9996, respectively. The limits of detection are 7.19?×?10^-18?M and 8.47?×?10^-18?M, respectively, and the relative standard deviations are 1.3 and 1.5% for 5 replicate measurements at 6.08?×?10^-14?M of LEV and 5.48?×?10^-14?M of MOXI. The method was successfully applied to the determination of LEV and MOXI in pharmaceutical samples, in urine and in serum.

Fabrication of a Sensitive Electrochemical Biosensor for Detection of DNA Hybridization Based on Gold Nanoparticles/CuO Nanospindles Modified Glassy Carbon Electrode

In this work, a sensitive electrochemical DNA biosensor for the detection of sequence‐specific target DNA was reported. Firstly, CuO nanospindles (CuO NS) were immobilized on the surface of a glassy carbon electrode (GCE). Subsequently, gold nanoparticles (Au NPs) were introduced to the surface of CuO NS by the electrochemical deposition mode. Probe DNA with SH (HS‐DNA) at the 5′‐phosphate end was covalently immobilized on the surface of the Au NPs through Au? S bond. Scanning electron microscopy (SEM) was used to elucidate the morphology of the assembled film, and electrochemical impedance spectroscopy technique (EIS) was used to investigate the DNA sensor assembly process. Hybridization detection of DNA was performed with differential pulse voltammetry (DPV) and the methylene blue (MB) was hybridization indicator. Under the optimal conditions, the decline of reduction peak current of MB (ΔI) was linear with the logarithm of the concentration of complementary DNA from 1.0×10^?13 to 1.0×10^?6 mol·L^?1 with a detection limit of 3.5×10^?14 mol·L^?1 (S/N=3). In addition, this DNA biosensor has good selectivity, and even can distinguish single‐mismatched target DNA.     

An ultrasensitive electrochemical immunosensor for CA72-4 based on a signal amplification strategy of MoS2 nanoflower-supported Au nanoparticles

Accurate detection of cancer antigen 72-4 (CA72-4), a tumor-associated glycoprotein, is of great significance for gastric cancer diagnosis and immunotherapy monitoring. Modification of noble metal nanoparticles on transition metal dichalcogenides can significantly enhance functions, such as electron transport. Molybdenum disulfide gold nanoparticles nanocomposites (MoS₂-Au NPs) were prepared in this study and a series of characterization studies were carried out. In addition, a label-free, highly sensitive electrochemical immunosensor molybdenum disulfide -Au nanoparticles/Glassy carbon electrode (MoS₂-Au NPs/GCE) was also prepared and used for the detection of CA72-4. The electrochemical performance of the immunosensor was characterized by electrochemical techniques, such as cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). The results indicated that better MoS₂-Au NPs nanomaterials have been synthesized, and the prepared electrochemical immunosensor, MoS₂-Au NPs/GCE, showed excellent electrochemical performance. The sensor exhibited high detection sensitivity under optimal conditions, including an incubation time of 30 min, an incubation temperature of 25 °C, and a pH of 7.0. The electrochemical immunosensor also had a low detection limit of 2.0 × 10^?5 U/mL (S/N = 3) in a concentration range of 0.001–200 U/mL, with good selectivity, stability, and repeatability. In conclusion, this study provided a theoretical basis for the highly sensitive detection of tumor markers in clinical biological samples.     

Chelate formation of zirconium with xylenol orange and semi-xylenol orange

The composition, formation constants, and molar absorptivities of the chelates of zirconium ion wtih xylenol orange and semi-xylenol orange are investigated spectrophotometrically in strong acid medium at ionic strength 3.0 (NaClO₄ and HClO₄). The data obtained were processed with a newly-constructed computer program and with LETAGROP/SPEFO. In the zirconium—xylenol orange system, Zr · H₃ L, Zr· H₄L, and Zr₂ · L are present with logarithmic overall formation constants of 37.80, 38.68, 43.47, and molar absorptivities of 3.10 × 10⁴ (485 nm), 5.98 × 10⁴ (528 nm), 9.50 × 10⁴ (551 nm) I mol^-1 cm^-1, respectively. The chelates Zr · L and Zr · HL were found in the zirconium—semi-xylenol orange system with logarithmic overall formation constants of 26.25 and 27.56, and molar absorptivities of 5.70 × 10⁴ (532 nm) and 8.30 × 10⁴ (535 nm) 1 mol^-1 cm^-1, respectively. Semi-xylenol orange is more sensitive and reliable than xylenol orange as a spectrophotometric reagent for zirconium.