基于耦合声场建模的膨胀腔消声器声学性能分析及试验

针对圆柱形膨胀腔消声器三维建模及声学性能分析问题, 提出一种基于切比雪夫变分原理的耦合声场建模方法, 建立三维圆柱形膨胀腔消声器理论模型并搭建试验台架, 传递损失试验结果验证了理论模型的准确性. 将膨胀腔消声器内部声场分解为多个子声场, 基于子声场间压力与质点振速连续性条件, 推导声场耦合变分公式, 构建子声场拉格朗日泛函. 将子声场声压函数展开为切比雪夫-傅里叶级数形式, 通过瑞利-里兹法求解膨胀腔消声器频率、声压响应及传递损失. 计算并对比分析扩张比、扩张腔长度、进出口管偏置对膨胀腔消声器消声性能的影响. 结果表明: 扩张比增大会有效提高消声器在低频段的消声性能, 进出口管的偏置对消声器消声性能影响很小.     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

高频聚焦换能器声场的激光测量法

本文描述了一种使用激光测振技术测量高频聚焦换能器声场布的方法，并给出了使用该方法对一种高频聚换能器进行测量的结果，通过理论计算对结果的正确性进行了验证。     

A modal analysis for the acoustic radiation problems, Ⅱ. Examples

The acoustic radiation modes and the field distribution modes describe the radiation patterns of a complex vibrating surface and the field distribution patterns respectively. The physical meanings of the acoustic radiation modes and the field distribution modes are revealed by numerical method. For a sphere body, a spinning body and a rectangular body, the geometrical patterns of the acoustic radiation modes and the field distribution modes are given. The radiation mode 1 represents the radiation behavior of a monopole radiator, the radiation modes 2 through 4 represent the radiation behavior of dipole radiators respectively, and the radiation modes 5 through 9 represent the radiation behavior of quadrapole radiators respectively. The acoustic radiation modes and the field distribution modes introduce the multi-pole decomposition method into discussion of the acoustic radiation problems.     

Sound Field Calculations of Elliptical Pistons by the Superposition of Two—Dimensional Gaussian Beams

We present an alternative approach to calculate the sound field of ultrasonic transducers.The distribution function of sources is expanded into the superposition of a series of two-dimensional Gaussian functions.The corresponding radiated sound field is expressed as the superposition of these two-dimensional Gaussian beams and is then reduced to the computation of these simple functions.This treatment does not require the condition that the shape of the source is of circular axial symmetry.A numerical example is presented for the uniform elliptical piston transducer and this is in good agreement with the results given by complicated computation.     

用函数记录仪描绘LRC电路暂态过程

引言现有的普通物理实验教材中,对RC、RL和LRC电路暂态过程的描绘,多采取用方波发生器代替直流电源,用示波器观察或用照相法摄取暂态曲线,RC电路的暂态过程,也可以用电压表和秒表逐点测量来描绘曲线。这些方法或只能观察,定量分析不便,或虽能定量分析,但实验过程复杂,效果都不理想。本文介绍用函数记录仪直接描绘RC、RL和LRC电路的暂态过程曲线,实验方法简便,而且利用图象进行定量分析和计算都很方便。     

电源多级过电压保护的电磁暂态分析

本文在对低压交流电源多级过电压保护装置核心器件——氧化锌压敏电阻进行残压计算和试验的基础上，确定了氧化锌压敏电阻的计算模型，根据这一模型，采用电磁暂态计算程序（ＥＭＴＰ）对交流电源多级过电压保护装置的保护性能以及各级参数配合进行了分析．     

A Simple Calculation Approach for the Second－Harmonic Sound Beam Generated by an Arbitrary Distribution Source

We present a simple calculation approach for the fundamental and second-harmonic sound beams with an arbitrary distribution source in the quasilinear approximation. The analysis is based on the assumption that the source function with an arbitrary geometry and distribution is expanded into the sum of a set of two-dimensional Gaussian functions. The two- and five-dimensional integral solutions for the fundamental and second-harmonic fields are, respectively, reduced in terms of Gaussian functions and simple one-dimensional integrals. The numerical evaluation of field distributions is then greatly simplified.