免疫算法在车辆调度问题中的应用

免疫算法是模仿生物体高度进化、复杂的免疫系统仿生的一种智能化启发式算法。本文根据车辆调度问题的具体情况，应用免疫算法解决车辆调度中路线安排问题，并提出了一种基于分组匹配的亲和力的计算方法。实验结果表明，免疫算法能有效地应用于车辆调度中路线安排问题。     

新颖的PPLN电光开关

在分析基于级联二阶非线性效应的准相位匹配周期极化铌酸锂(PPLN)波导全光波长变换器的有关参量容限的基础上,提出PPLN波长变换器的电光调控设想,并给予简要论证,论证结果是可行的,从而可实施电控调谐来自动补偿其失配,进而也可实现光开关的功能 关键词： 准相位匹配 周期极化铌酸锂 波长变换 光开关 电光效应调控     

字符串匹配算法在DNA序列比对中的应用

高通量测序技术的飞速发展让生物信息领域迎来了大数据时代。新技术在提供海量生物遗传信息的同时,也给分析这些数据带来了新的挑战。DNA序列比对是信息分析流程中的关键步骤,为后续的变异检测提供序列比对信息。2015“深圳杯”数学建模夏令营B题以DNA序列比对为研究课题,希望参赛学生给出序列快速比对的最佳方案。本文简要点评了各参赛队伍的解答情况,然后介绍了现有DNA序列比对软件中用到的算法和数据结构。     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

实用型三谱段太阳模拟器的设计与研制

本文设计并研制了一种实用型三谱段太阳模拟器,其光谱匹配可同时调整3个谱段(300~700 nm,700~900 nm,900~1 700 nm)范围的能量,修正后可满足三结砷化镓太阳电池的测试使用要求。本文重点阐述了三谱段太阳模拟器滤光片的设计和氙灯光谱的修正及测试,介绍了太阳模拟器的光机结构。实验表明:三谱段太阳模拟器的光谱匹配满足三结砷化镓太阳电池各子电池的响应电流值。在有效辐照面150 mm×150 mm上,平均辐照度可以达到2个太阳常数(2 730 W/m²),辐照不均匀度达到±1.77%,辐照不稳定度达到±0.83%,为太阳电池自动分拣系统提供了可靠稳定的平台。     

Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

三维轴对称折叠腔CO2激光器的位相锁定

在一新型三维轴对称腔CO2激光器的基础上提出了一种对此激光器位相锁定的方法。通过在输出镜后放置一具有反射和整形作用的凹凸镜，让作为输出注入光束的谐振腔优先起振。此腔输出的光束到达凹凸镜时被其反射。利用重新定义光斑半径的方法，证明此光束能够覆盖其他放电管输出的光束，根据几何光学，此光束能反射进入各个放电管。然后利用光子简并度的概念证明了反射光束能够控制腔内的本征模式，并且数值分析了注入锁定后腔内模式匹配。在反射注入锁定的情况下，给出了数值计算的光强输出及其模拟，结果证明经位相锁定后，激光器输出光束的质量有了很大的提高。     

Theoretical Investigation of Transparent (3–5 μm) and High Reflective (1.3 μm) Filter by Sol-Gel Process

When designing a cut-off interference filter, extra layers are needed to add on each side of periodic symmetrical multilayer to match the incident medium and the substrate. In this paper, we use sol-gel film with adjustable refractive index as the match layer. The influence of the refractive index and thickness of the match layer on the film system is discussed in detail. As an example, a special filter which is transparent (>80%) at the wavelength 3–5 m and high reflective (>90%) at the wavelength 1.3 m is designed. Finally a series of optimized film parameters are presented. The whole design process is a good reference to the other multilayer special filter made by sol-gel process.     

折叠波导行波管切断匹配的设计

 利用电磁模拟软件,计算得到了H面渐变与E面渐变的楔形衰减器匹配效果,指出在相同渐变长度下,E面渐变匹配效果优于H面渐变。H面渐变衰减器反射主要来源于电场集中处,而E面渐变衰减器主要来源于渐变前部尖端处。在此基础上设计出了一种变形的匹配衰减器,即在E面渐变衰减器渐变开始处向前延伸一块薄片。计算结果与测试结果表明:与H面渐变和E面渐变的楔形衰减器相比,所设计衰减器在近截止频率处的匹配效果得到了明显的改善。