配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

High‐contrast Noninvasive Imaging of Kidney Clearance Kinetics Enabled by Renal Clearable Nanofluorophores

Noninvasive imaging of kidney clearance kinetics (KCK) of renal clearable probes is key to studying unilateral kidney function diseases, but such imaging is highly challenging to achieve with in vivo fluorescence. While this long‐standing challenge is often attributed to the limited light penetration depth, we found that rapid and persistent accumulation of conventional dyes in the skin “shadowed” real fluorescence signals from the kidneys and prevented noninvasive imaging of KCK, which, however, can be addressed with renal clearable nanofluorophores. By integrating near infrared emission with efficient renal clearance and ultralow background interference, the nanofluorophores can increase kidney‐contrast enhancement and imaging‐time window by approximately 50‐ and 1000‐fold over conventional dyes, and significantly minimize deviation between noninvasive and invasive KCK, laying down a foundation for translating in vivo fluorescence imaging in preclinical noninvasive kidney function assessments.     

Optimum Gas Journal Bearing with Open Bearing Ends and Feeder Slot

The optimum design of the cylindrical outer contours of a gas journal bearing is obtained using the methods of the calculus of variations with allowance for the lubricant leakage through the bearing ends and the feeder slot when the lubricant mass in the working gap is conserved. The variational problem of designing the clearance shape giving the maximum bearing load capacity is formulated and solved. A modified Elrod-Burgdorfer condition for the pressure is used.     

Influence of vent positions on smoke clearance from a room

Results of solutions to the equations governing the clearance of smoke in laminar and in turbulent flow from a single rectilinear room are presented fof five different vent arrangements. These results show that the average smoke concentration in the room decreases in an approximately exponential manner with time at a rate that depdends much more on room geometry (vent positions in the present case) than on whether the flow is laminar or turbulent. The benefit of this observation is that, provided the clearance air jet is disrupted by impingement on a solid surface within the room, the analysis of smoke movement can for many practical purposes be limited to consideration of laminar flow only. An exceptional case is when the jet is allowed to take a straight line path between the inlet and outlet vents. Here in the absence of the large scale eddies caused by jet impingement, the smaller scale eddies of turbulent flow become relatively important as a mixing mechanism and give higher clearance rates than in laminar flow. Even so, this type of geometry is best avoided. The appearance of the jet is shown in a graphic presentation of the numerical results for laminar flow.     

An engineering approach to blade designs for low to medium pressure rise rotor-only axial fans

Low to medium pressure rise axial fan equipment of the arbitrary vortex flow rotor-only type is widely used in industrial and commercial applications, with many of the installations and rotor designs being far from optimum. Complex computational methods exist for analyzing flows in, for example, high-speed axial flow compressors with multistage blade rows; however, the designers and manufacturers of low-speed, general-purpose axial flow fan equipment have been reluctant to embrace this technology. A simpler yet reliable design technique is presented that allows this category of ducted axial fan rotors, in the presence of swirl-free inlet flow, to be designed to achieve a specified duty with sufficient accuracy for engineering purposes. Practical blade design recommendations and limits, similar to those that exist for free vortex flow axial rotors, have been established for the arbitrary vortex flow rotor-only case.

The technique employs a straightforward engineering approach to arbitrary vortex flow axial fan rotor design, and the equation set can be solved by using relatively simple numerical methods. Estimates of pressure rise and shaft power characteristics for a proposed fan/rotor design can be computed and the design loop iterated until an acceptable set of blade parameters is identified. It is also possible to analyze the performance of an existing axial fan installation as a prelude to the design of a more efficient and effective replacement rotor.

Experimental data used in validating the design and analysis techniques are also presented. These data include comprehensive Cobra pressure probe surveys of local flow parameters downstream of three different low boss ratio, low solidity, arbitrary vortex flow rotors (all with circular arc camber line type blades) as well as fan performance characteristics for one of the experimental rotors configured as a direct-exhaust fan unit. Installation-dependent factors such as direct-exhaust losses and tip clearance effects are also examined. The analytical technique is shown to provide acceptable estimates of fan/rotor pressure rise performance and shaft power characteristics over a moderately wide range of blade angles and operating conditions.     

TOPOLOGY AND VORTEX STRUCTURES OF A CURVING TURBINE CASCADE WITH TIP CLEARANCE (Ⅰ)- EXPERIMENTAL MODEL AND TOPOLOGICAL FLOW PATTERNS ON BOTH ENDWALLS AND BLADE SURFACES

By means of ink trace visualization of the flows in conventional straight, positively curved and negatively curved cascades with tip clearance, and measurement of the aerodynamic parameters in the transverse section, and by appling topology theory, the structures on both endwalls and blade surfaces were analyzed. Compared with conventional straight cascade, blade positive curving eliminates the separation line of the upper passage vortex and leads the secondary vortex to change from close separation to open separation, while blade negative curving effects merely the positions of singular points and the intensities and scales of vortex. Foundation items: 973 Project of China; the Doctoral Foundation of Education Ministry of China (EDAF24403003) Biography: YANG Qing-hai (1969−)     

明日叶黄酮类化合物清除羟基自由基活性研究

为了研究明日叶黄酮类化合物对羟基自由基的清除作用,以明日叶（主要取叶片）为原料,用体积分数为65％乙醇提取明日叶总黄酮,测定其总黄酮含量.通过Fenton反应体系产生羟基自由基,利用明日叶提取液中的功能成分黄酮类化合物对羟基自由基的清除作用进行研究.结果表明：明日叶提取物总黄酮质量分数为10.18％,且黄酮类化合物对羟基自由基有较强清除效力,当提取物总黄酮浓度在0.1～1.0 mg/mL范围内,其与清除率呈正相关.明日叶中黄酮类化合物对羟基自由基有较强清除效力,作为天然抗氧化产品开发具有一定价值.     

Quantification of furosemide in camel plasma by high resolution mass spectrometry,application on pharmacokinetics

We developed and validated a high‐resolution liquid chromatography mass spectrometry method for the quantification of furosemide in camel plasma which was used for a pharmacokinetic study in camels. Plasma samples were extracted by supported liquid extraction and furosemide and internal standard (furosemide‐D5) were separated on a an Agilent Zorbax XDB C₁₈ column (50 × 2.1 mm i.d., 3.5 μm). Data was acquired in full‐scan mode over a mass range of 200–400 Da in negative electrospray mode at a resolution of 70,000. Linear calibration curves were obtained over the concentration ranges of 1.0–10,000 ng/mL. The validated method was then successfully applied in evaluating the pharmacokinetics and metabolites of furosemide in six camels (Camelus dromedarus ) and we were able to advice on a withdrawal time of furosemide treatment before racing.     

TiO2 nanorods branched on fast-synthesized large clearance TiO2 nanotube arrays for dye-sensitized solar cells

A large clearance TiO₂ nanotube arrays (LTAs) has been synthesized by a not more than 12 h anodization duration and based on this a branched TiO₂ nanotube arrays (BLTs) has been achieved through TiO₂ nanorods branch-like grown on the LTAs. Some key factors and probable mechanisms of the fabrication processes on two novel nanoarchitectures are discussed. Exhilaratingly, it is found that the obtained LTAs has demonstrated large pore diameter and void spaces (pore diameter ∼350 nm; void spaces ∼160 nm; and tube length ∼3.5 μm), and the synthesized hierarchical BLTs, compared with conventional TiO₂ nanotube arrays, has shown a much stronger dye absorption performance and an approximately double of the solar cell efficiency (in our case from 1.62% to 3.18% under simulated AM 1.5 conditions).     

On dynamic tumor eradication conditions under combined chemical/anti-angiogenic therapies

In this paper ultimate dynamics of the five-dimensional cancer tumor growth model at the angiogenesis phase is studied. This model elaborated by Pinho et al. in 2014 describes interactions between normal/cancer/endothelial cells under chemotherapy/anti-angiogenic agents in tumor growth process. The author derives ultimate upper bounds for normal/tumor/endothelial cells concentrations and ultimate upper and lower bounds for chemical/anti-angiogenic concentrations. Global asymptotic tumor clearance conditions are obtained for two versions: the use of only chemotherapy and the combined application of chemotherapy and anti-angiogenic therapy. These conditions are established as the attraction conditions to the maximum invariant set in the tumor free plane, and furthermore, the case is examined when this set consists only of tumor free equilibrium points.