Ce掺杂CrSi2电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及Ce掺杂CrSi2的电子结构和光学性质进行理论计算。计算结果表明，未掺杂CrSi2是间接带隙半导体，其禁带宽度为0.392 eV，掺杂Ce元素，仍然是间接半导体，带隙宽度下降为0.031eV。未掺杂CrSi2在费米能级附近主要由Cr-5d、Si-3p态贡献。Ce掺杂后在费米能级附近主要由Cr-5d轨道，Ce-4f轨道，C-2p，Si-3p轨道贡献，掺杂后电导率提高。未掺杂CrSi2有两个介电峰，掺杂后，只有一个介电峰。未掺杂CrSi2，在能量为6.008处吸收系数达到最大值，掺杂后在能量为5.009eV处，吸收系数达到最大值。     

La单掺4H-SiC电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及La掺杂4H-SiC的电子结构和光学性质进行理论计算。计算结果表明，未掺杂4C-SiC其禁带宽度为2.257 eV。La掺杂后带隙宽度下降为1.1143eV，导带最低点为G点，价带最高点为F点，是P型间接半导体。掺杂La原子在价带的低能区间贡献比较大，而对价带的高能区和导带的贡献比较小。未掺杂4H-SiC在光子能量为6.25 eV时，出现一个介电峰，这是由于价带电子向导带电子跃迁产生。而La掺杂后，出现3个介电峰，分别对应的光子能量为0.47eV、2.67eV、6.21eV，前两个介电峰是由于价带电子向杂质能级跃迁产生，第三个介电峰是由于价带电子向导带电子跃迁产生。La掺杂后4H-SiC变成负介电半导体材料。未掺杂4h-SiC的静态介电常数为2.01，La掺杂的静态常数为12.01。     

Curing behavior and properties of high biosourced epoxy resin blends based on a triepoxy monomer and a tricarboxylic acid hardener from 10-undecenoic acid

Renewable propane-1,2,3-triyl tris(9-(oxiran-2-yl) nonanoate) (EGU, 100 wt% biogenic) and a tricarboxylic acid triglyceride (CGTU) hardener (85.7 wt% biogenic) were synthesized from 10-undecenoic acid (10-UDA) and used to produce epoxy resins with 52–92 wt% biobased carbon. CGTU was prepared by thermally activated thiol-ene coupling of thioglycolic acid onto propane-1,2,3-triyl tris(undec-10-enoate), (GUD) in the absence of solvent. The characterized CGTU was used as a green hardener of blends based on EGU and a conventional bisphenol A-based epoxy pre-polymer (DGEBA) at various mass percentages (0–100 wt%) with an stoichiometric epoxy/acid equivalent ratio. Calorimetric studies revealed higher peak temperature, lower reaction heats, and longer gelation times in resins with high EGU proportion, evidencing the lower reactivity of aliphatic EGU compared with aromatic DGEBA. Cured resins were yellowish transparent rubber-like materials with glass transition temperatures (Tg) varying from −14 °C to −42 °C and tensile strength in the range of 1750 kPa–790 kPa, for 0 and 100 wt % EGU, respectively. The soluble fraction of all resins was less than 4.3%, reflecting a high level of crosslinking. Thermosets with high biobased content showed both UV-light protection and visible light transparency.     

Boundary value problems for a quasilinear parabolic equation with an unknown coefficient

The work is connected with the mathematical modeling of physical–chemical processes in which inner characteristics of materials are subjected to changes. The considered nonlinear parabolic models consist of a boundary value problem for a quasilinear parabolic equation with an unknown coefficient multiplying the derivative with respect to time and, moreover, involve an additional relationship for a time dependence of this coefficient. For such a system, conditions of unique solvability in a class of smooth functions are studied on the basis of the Rothe method. The proposed approach involves the proof of a priori estimates in the difference-continuous Hölder spaces for the corresponding differential-difference nonlinear system that approximates the original system by the Rothe method. These estimates allow one to establish the existence of the smooth solutions and to obtain the error estimates of the approximate solutions.As examples of applications of the considered nonlinear boundary value problems, the models of destruction of heat-protective composite under the influence of high temperature heating are discussed.     

Ce掺杂6H-SiC电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法,对未掺杂及Ce掺杂6H-SiC的电子结构和光学性质进行理论计算.计算结果表明,未掺杂6H-SiC是间接带隙半导体,其禁带宽度为2.045 eV,掺杂Ce元素,带隙宽度下降为0.812 eV.未掺杂6H-SiC在价带的低能区,Si-3s、C-2s电子轨道对态密度的贡献较大,在价带的高能区,主要是由Si-3p、Si-3s、C-2p态组成.掺杂后Ce原子的4f轨道主要贡献在导带部分,掺杂后电导率提高.未掺杂时,只有一个介电峰,是价带电子跃迁到导带电子所致,掺杂后有两个介电峰,第一个介电峰是由于导带电子跃迁到Ce原子4f轨道上产生,第二个峰是价带电子向导带电子跃迁产生.未掺杂6H-SiC,在能量为10.31 eV处吸收系数达到最大值,掺杂后在能量为6.57 eV处,吸收系数达到最大值.     

Computer-aided design of formulated products

Formulated products represent a particular class of complex chemical products, and their design is typically based on experience and extensive experimentation. Although still at an early stage, and despite that their potential is not fully accessed and not fully used by the industry, computer-aided design (CAD) methods and tools offer many possibilities in the design of formulated products. The CAD methodology based on computerized models enables the formulation chemists to speed up the design process, without completely replacing experiments.In this work, we summarize previous studies in the field and present important elements of the CAD framework, emphasizing estimation methods for key target properties, link to specifications, and finally, some case studies will illustrate how the CAD framework can be used in practice for formulated products.     

Designing Dimeric Lanthanide(III)-Containing Ionic liquids

Herein, we report on the preparation of liquid dimeric lanthanide(III)-containing compounds. Starting from the design of dimeric solids, we demonstrate that by tuning of anion and cation structures we can lower the melting points below room temperature, whilst maintaining the dimeric structure. Magnetic measurements could establish the spin-spin interactions of the neighboring lanthanide(III) ions in the liquid state at low temperatures, and matched the interactions of the analogous crystalline solid compounds.     

High-Spin and Reactive Fe13 Cluster with Exposed Metal Sites

Atomically defined large metal clusters have applications in new reaction development and preparation of materials with tailored properties. Expanding the synthetic toolbox for reactive high nuclearity metal complexes, we report a new class of Fe clusters, Tp*₄W₄Fe₁₃S₁₂ , displaying a Fe₁₃ core with M−M bonds that has precedent only in main group and late metal chemistry. M₁₃ clusters with closed shell electron configurations can show significant stability and have been classified as superatoms. In contrast, Tp*₄W₄Fe₁₃S₁₂ displays a large spin ground state of S=13. This compound performs small molecule activations involving the transfer of up to 12 electrons resulting in significant cluster rearrangements.     

新型低共熔溶剂的制备、表征及物性研究

以氯化1-丁基-3-甲基咪唑鎓([Bmim]Cl)和二元羧酸为原料,由不同摩尔比混合制备了一类新型低共熔溶剂,采用红外光谱对[Bmim]Cl和二元羧酸之间的作用进行了分析。分别测定了其粘度、电导率、密度、折射率等物理性质,并研究了温度、二元羧酸结构和摩尔比对这些物理性质的影响。结果表明,新型低共熔溶剂的粘度随温度的升高而降低,电导率随温度的升高而增加。温度对两者的影响可以采用VTF方程进行精确地拟合。新型低共熔溶剂的密度随温度的升高而呈线性下降。对新型低共熔溶剂的过量摩尔体积进行计算的结果表明,过量摩尔体积均为正值,二元羧酸对过量摩尔体积的贡献远大于[BMIM]Cl,而结构特性的贡献多于物理作用。折射率和密度随二元羧酸碳数的变化趋势基本相似。     

GaAs pyramidal quantum dot coupled to wetting layer in an AlGaAs matrix: A strain-free system

In this contribution, the electronic and linear and nonlinear optical properties of pyramid-shaped GaAs quantum dots (QDs) coupled to wetting layer (WL) in an Al_0.3Ga_0.7As matrix have been investigated. This nanostructure is relaxed from strain effects due to very small lattice-mismatching. Three transitions of P-to-S, WL-to-P, and WL-to-S were considered and the corresponding transition dipole moments, oscillator strengths, and linear and nonlinear optical properties regarding to these transitions were investigated as a function of the QD height. The results showed that for P-to-S transition, which is a purely in-plane-polarized transition, the dependence of electronic and optical properties on the size is moderate and can be neglected. But for WL-to-P and WL-to-S transitions, which are in-plane- and z-polarized transitions, respectively, the electronic as well as optical properties are strongly size-dependent. Furthermore, a competition between WL-to-S and WL-to-P transitions was observed when the QD size changed.