A statistical approach to characterize the viscoelastic creep compliances of a vinyl ester polymer

The objective of this study was to develop a model to predict the viscoelastic material functions of a vinyl ester (VE) polymer with variations in its experimentally obtained material properties under combined isothermal and mechanical loading. Short-term tensile creep experiments were conducted at three temperatures below the glass transition temperature of the VE polymer, with 10 replicates for each test configuration. The measured creep strain versus time responses were used to determine the creep compliances using the generalized viscoelastic constitutive equation with a Prony series representation. The variation in the creep compliances of a VE polymer was described by formulating the probability density functions (PDFs) and the corresponding cumulative distribution functions (CDFs) of the creep compliances using a two-parameter Weibull distribution. Both Weibull scale and shape parameters of the creep compliance distributions were shown to be time and temperature dependent. Two-dimensional quadratic Lagrange interpolation functions were used to characterize the Weibull parameters to obtain the PDFs and, subsequently, the CDFs of the creep compliances for the complete design temperature range during steady state creep. At each test temperature, creep compliance curves were obtained for constant CDF values and compared with the experimental data. The predicted creep compliances of the selected VE polymer in the design space are in good agreement with the experimental data for all three test temperatures.     

Mechanical properties and molecular structures of virgin and recycled HDPE polymers used in gravity sewer systems

The widespread use of plastics in the conditioning, packaging and building material sectors generates an enormous amount of industrial waste which could be recycled for wastewater pipes and fittings. Nevertheless, current manufacturing standards in the piping industry recommend against the use of post-consumer recycled materials—a policy based on inadequate understanding of the properties and long-term mechanical performance of recycled materials. The present study compared the material characteristics of virgin and recycled high-density polyethylene (HDPE) plastics commonly found in the piping industry. Mechanical testing, oxidative induction time (OIT), melt flow index (MFI) and thermal analysis were used in conjunction with X-ray fluorescence (μ-XRF), size exclusion chromatography and ¹³C solid-state NMR to evaluate mechanical behavior and molecular structure as well as contaminant or filler contents. This study provides evidence for the degradation processes impact that can occur when post-industrial and post-consumer polymers are recycled. However, the study identified two measures to improve the material qualities of post-consumer recycled HDPE: 1) reducing the amount of contaminants or, alternatively, improving their compatibility with HDPE resins, and 2) improving current sorting and recycling processes to increase the amount of tie molecules in HDPE materials.     

A Highly Sensitive and Selective Label-free Electrochemical Biosensor with a Wide Range of Applications for Bisphenol A Detection

A label-free DNA-based electrochemical biosensor owning high sensitivity and selectivity has been established for detecting bisphenol A in a wide range of applications. Coupling the high electrochemical performance of graphene oxide-thionine-Au nanomaterial with the specific binding capacity of the aptamers to BPA, the monitoring of trace amount of BPA was realized, the detection limit was 3.3 pg ⋅ mL⁻¹ with strong anti-interference. Besides, using molecular docking, it was found that BPA binds to the bases DC-49, DC-51, DG-52, DG-53 and DA-63 on the aptamer via hydrogen bonding and π-π stacking interactions. Finally, the biosensor had been successfully applied in different real samples.     

Temperature-dependent ratcheting of PTFE gaskets under cyclic compressive loads with small stress amplitude

Uniaxial stress-controlled ratcheting experiments on PTFE gaskets under cyclic compressive loads with small stress amplitude were performed. The effect of temperature on the deformation behavior was considered. Results showed that the compressive modulus decreases rapidly when the temperature increases from 100 °C to 200 °C. Compressive ratcheting deformation with cycles increase significantly with the increases of temperature. The ratcheting deformations at 100 °C, 150 °C and 200 °C are nearly two, three and five times that at room temperature, respectively. Most of ratcheting deformation mainly occurs during the first 20 cycles because the subsequent ratcheting rate and strain range are small and much less than those in the previous cycles. The accumulated deformation under cyclic loads with small stress amplitude is relatively approach to the static compressive creep with the same peak stress. Therefore, the accumulated deformation with time of PTFE gaskets obtained by cyclic compression with small stress amplitude can be estimated by the corresponding static creep deformation with good accuracy under the approximate stress rate and the same temperature, especially at room temperature.     

Creep life evaluation of aluminum conductor composite core utilized in high voltage electric transmission

The creep life of aluminum conductor composite core (ACCC) utilized in high voltage electric transmission was investigated using an experimental method based on the equivalence relationship. First, the time-temperature-stress equivalence relationship was developed using the time-temperature and the time-stress equivalence relationships. Then, tensile creep experiments were conducted under different temperatures and different stress levels to obtain the strain-time curves of the ACCC. Finally, the creep strain master curve was obtained using the experimental data based on the time-temperature-stress equivalence relationship, allowing prediction of ACCC creep life. The results will play an important role in evaluation of the long-term characteristics of the ACCC for engineering applications.     

高通量虚拟筛选CDK2/Cyclin A2靶点抑制剂

CDK2/Cyclin A2复合蛋白的异常表达与乳腺癌、 口腔癌、 食管鳞状细胞癌的发生密切相关. CDK2/ Cyclin A2复合蛋白的活性位点不同于CDK2单体. 至今临床上尚无靶向此复合蛋白的药物分子. 针对CDK2/Cyclin A2复合蛋白, 以实验报道的10个抑制剂分子构建药效团模型, 通过药物体外药代动力学（ADME）、 Docking、 聚类分析、 毒性预测, 从DrugBank, ChEMBL和TCM@Taiwan 3个数据库约90万组数据中进行高通量虚拟筛选, 进一步进行MD模拟、 MM/PBSA结合自由能计算、 能量分解和平均非共价作用(aNCI)分析, 筛选出3个抑制效果优于阳性实验药Roscovitine的先导分子: DrugBank-2004, DrugBank-583和ChEMBL-7122. 与CDK2蛋白相比, CDK2/Cyclin A2复合蛋白结合位点空间变大, 先导分子与Lys33, Asp86, Lys129和Asp145残基之间的排斥作用有所降低, 导致结合自由能更大.     

岩体力学中流变与断裂的耦合作用

本文首先分析含Ｉ型裂纹岩石的流变断裂特性，提出了Ⅰ型裂纹流变断裂初度的三个阈值；然后应用断裂力学和粘塑性理论。得出了具有屈服、蠕变和Ⅱ型裂纹扩展等物理力学特性的岩体隧洞的衬砌与围岩应力的解析表达式。     

Confined buckling of inextensible rods by convex difference algorithms

In this Note we present an approach to determine the local minima of a specific class of minimization problems. Attention is focused on the inextensibility condition of flexible rods expressed as a nonconvex constraint. Two algorithms are derived from a special splitting of the Lagrangian into the difference of two convex functions (DC). They are compared to the augmented Lagrangian methods used in this context. These DC formulations are easily extended to contact problems and applied to the determination of confined buckling shapes. To cite this article: P. Alart, S. Pagano, C. R. Mecanique 330 (2002) 819–824.     

对蓬安县三元水库大坝外坡裂缝产生的原因及整治工程的探讨

本文通过对蓬安县三元水库大坝外坡裂缝产生的原因分析，进而运用岩、土力学的理论与方法反算推论出了裂缝的产生不是深层坝体土滑动引起的，而是局部浅层坝体土在水的诱发作用下作蠕滑-拉裂变形所产生的。在明确了大坝裂缝产生的原因后，提出了一系列相应整治工程措施，以达到彻底根治裂缝和稳固大坝的目的。