Current trends in the description of lanthanum strontium manganite oxygen electrode reaction mechanism in a high-temperature solid oxide cell

This review summarizes recent progress in understanding the oxygen reduction and evolution reactions at the lanthanum strontium manganite electrode of a high-temperature solid oxide cell. Information provided here is put into the perspective of the defect chemistry of lanthanum strontium manganite and its impact on the electrode reaction mechanisms itself. After summarizing recent views on the oxygen reduction reaction mechanism, the focus turns to the oxygen evolution reaction, which is significantly less treated in the literature. A combination of the information in the literature on both reactions was the basis for modified reaction mechanism of the oxygen evolution reaction to be proposed under consideration of recent experimental observations and theoretical findings.     

Imposing accurate wall boundary conditions in corrective‐matrix‐based moving particle semi‐implicit method for free surface flow

Corrective matrix that is derived to restore consistency of discretization schemes can significantly enhance accuracy for the inside particles in the Moving Particle Semi‐implicit method. In this situation, the error due to free surface and wall boundaries becomes dominant. Based on the recent study on Neumann boundary condition (Matsunaga et al, CMAME, 2020), the corrective matrix schemes in MPS are generalized to straightforwardly and accurately impose Neumann boundary condition. However, the new schemes can still easily trigger instability at free surface because of the biased error caused by the incomplete/biased neighbor support. Therefore, the existing stable schemes based on virtual particles and conservative gradient models are applied to free surface and nearby particles to produce a stable transitional layer at free surface. The new corrective matrix schemes are only applied to the particles under the stable transitional layer for improving the wall boundary conditions. Three numerical examples of free surface flows demonstrate that the proposed method can help to reduce the pressure/velocity fluctuations and hence enhance accuracy further.     

移动加热器法生长碲锌镉晶体的组分输运与界面形貌研究

移动加热器法(THM)生长碲锌镉晶体时,界面稳定性对晶体生长的质量有很大影响。本文基于多物理场有限元仿真软件Comsol建立了THM生长碲锌镉晶体的数值模拟模型,讨论了Te边界层与组分过冷区之间的关系,对不同生长阶段的物理场、Te边界层与组分过冷区进行仿真研究,最后讨论了微重力对物理场分布的影响,并对比了微重力与正常重力下的生长界面形貌。模拟结果表明,Te边界层与组分过冷区的分布趋势是一致的,在不同生长阶段,流场中次生涡旋的位置会发生移动,从而导致生长界面的形貌随着生长的进行发生变化,同时微重力条件下形成的生长界面形貌最有利于单晶生长。因此,在晶体生长的中前期,对次生涡旋位置的控制和对组分过冷的削弱,是THM生长高质量晶体的有效方案。     

Free boundary problem for a fully nonlinear and degenerate parabolic equation in an angular domain

This paper concerns with the problem of how to running an insurance company to maximize his total discounted expected dividends. In our model, the dividend rate is limited in $[0,M]$ and the company is allowed to transfer any proportion of risk by reinsuring. So there are two strategies which we call dividend strategy and reinsurance strategy. The objective function and the corresponding optimal two strategies are the solution and the two free boundaries of the following Barenblatt parabolic equation

$v_t?\underset{0\le a\le 1}{\max }?(\frac{1}{2}{a}^2{\sigma }^2{v}_{xx}+a\mu v_x)+cv?\underset{0\le l\le M}{\max }?[(1?v_x)l]=0$

under certain boundary conditions on an angular domain

$Q_T=\{(x,t)|0<x<Mt,0<t\le T\}.$

The main effort is to analyze the properties of the solution and the free boundaries to show the optimal decision for the insurance company.     

Experimental determination of interfacial energy for solid Al in the Al-Sn-Mg eutectic system with Bridgman-type apparatus

The equilibrated grain boundary groove shape of solid Al in equilibrium with Al-Sn-Mg eutectic liquid was observed by using a Bridgman type directional solidification apparatus. The ratio of the thermal conductivity of the equilibrated liquid to the thermal conductivity of solid Al has been obtained as 0.91. In addition, the average Gibbs-Thomson coefficient, $\bar{\mathrm{\Gamma }}=(4.20\pm 0.35)\times {10}^{-8}\mathrm{Km}$, the solid-liquid interfacial energy, ${\sigma }_{SL}=180.68\pm 23.48\text{mJ}/{\text{m}}^2$ and the grain boundary energy, ${\sigma }_{GB}=309.30\pm 29.47\text{mJ}/{\text{m}}^2$, in the Al/Al-Sn-Mg system have been calculated from the measured grain boundary shapes.