Recyclable and reusable Pd(OAc)2/PPh3/PEG‐2000 system for homocoupling reaction of arylboronic acids under air without base

A stable and efficient Pd(OAc)₂/PPh₃/PEG‐2000 catalytic system for homocoupling of arylboronic acids has been developed. In the presence of Pd(OAc)₂ and PPh₃, the homocoupling reaction of arylboronic acids was carried out smoothly in PEG‐2000 at 70 °C under air without base to afford a variety of symmetric biaryls in good to excellent yields. The isolation of the products was readily performed by extraction with diethyl ether, and the Pd(OAc)₂/PPh₃/PEG‐2000 system could be easily recycled and reused six times without significant loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

修饰聚合物液-固亲和萃取体系纯化大豆中的组氨酸

聚乙二醇(PEG)6000经亚氨基二乙酸(IDA)修饰后和CuSO4反应,形成PEG修饰聚合物PEG-(IDA-Cu)2 ,与吐温80、磷酸盐混合,构成液-固亲和萃取体系,直接从大豆蛋白匀浆中提取氨基酸.选定萃取条件为磷酸盐摩尔比n(K2HPO4)∶n(NaH2PO4)为4.8∶1,体系pH值 7.70,总盐浓度为1.60 mol·L-1;吐温80的体积分数为10.5%.结果表明该体系对大豆蛋白匀浆中氨基酸的二次萃取率为66.5%,用离子交换技术后继处理,得纯度较高的组氨酸.     

Synthesis of side‐chain liquid‐crystalline homopolymers and triblock copolymers with p‐methoxyazobenzene moieties and poly(ethylene glycol) as coil segments by atom transfer radical polymerization and their thermotropic phase behavior

A series of side‐chain liquid‐crystalline (LC) homopolymers of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with different degrees of polymerization were synthesized by atom transfer radical polymerization (ATRP), which were prepared with a wide range of number‐average molecular weights from 5.1 × 10³ to 20.6 × 10³ with narrow polydispersities of around 1.17. Thermal investigation showed that the homopolymers exhibit two mesophases, a smectic phase, and a nematic phase, and the phase‐transition temperatures of the homopolymers increase clearly with increasing molecular weights. A series of novel LC coil triblock copolymers with narrow polydispersities was synthesized by ATRP, and their thermotropic phase behavior was investigated with differential scanning calorimetry and polarized optical microscopy. The LC coil triblocks were designed to have an LC conformation of poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] with a wide range of molecular weights from 3.5 × 10³ to 1.7 × 10⁴ and the coil conformation of poly(ethylene glycol) (PEG) (number‐average molecular weight: 6000 or 12,000) segment. Their characterization was investigated with ¹H NMR, Fourier transform infrared spectra, and gel permeation chromatography. Triblock copolymers exhibited a crystalline phase, a smectic phase, and a nematic phase. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased, and the crystallization of PEG depressed with increasing molecular weight of the LC block. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2854–2864, 2003     

A ONE-STEP SURFACE MODIFICATION PROCEDURE TO PEG-GRAFTED NANO-TITANIA

PEG （Polyethylene Glycol）-grafted nano-titania has been obtained in a one-step procedure using hexamethylene diisocyanate as the coupling agent and dibutyltin dilaurate as the catalyst in toluene at 80℃ and characterized qualitatively by FTIR and quantitatively by elemental analysis and thermogravimetric analysis. A comparison of nano-titania with two other commonly used inorganic nanoparticles, nano-silica and nano-alumina, is made, revealing that reactivity order is nano- silica 〉 nano-alumina 〉 nano-titania in view of PEG grafting. Possible mechanism of PEG grafting is also discussed.     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.     

Crystallization behavior and biodegradation of poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers

Block copolymerization by using isocyanates is an effective method for incorporating PHB and PEG because it can prepare copolymers with good properties, such as toughness, strength, and so on. In this study, we adopted soil suspension system to estimate the biodegradability of a series of PHB/PEG multiblock copolymers with different compositions and block lengths. In the degradation process, the changes in weight loss, molecular weight, and tensile strength were periodically measured to determine the biodegradability, and the surface morphology was also observed by SEM. In contrast to pure PHB, the weight loss of the copolymer was relatively lower. On the other hand, the tensile strength and molecular weight experienced apparent decrease, and for BHG1000-3-1, they reached 46.7% and 77.7% of the initial value, respectively. SEM observation showed that the surface was covered with numerous erosion pits. All these indicate that the degradation indeed took place and long-chain molecules have been hydrolyzed into shorter ones. The crystallization behavior was also investigated by DSC and WAXD. The results showed that both the segments, PEG and PHB, can form crystalline phases at lower PHB contents ranging from 29% to 44%, and when PHB component was more than 60%, only PHB phase can crystallize.     

Controllable and flexible cellular network for virus cell-to-cell spread

Cellular networks were constructed based on PEG modification and soft lithography, in which cell numbers and spatial distributions can be controlled. A micro-injector was combined with cellular networks to fix virus induced plaque and virus spread direction, by which virus cell-to-cell spread can be distinguished from cell-free spread.     

Volume and compressibility changes on mixing aqueous solutions of the amino acid and poly(ethylene glycol)

The volume and compressibility changes on mixing aqueous solutions of the amino acid and poly(ethylene glycol) were measured with a vibration densimeter and a sing-around velocimeter at 298.15 K. For the system of alanine-PEG-H₂O, the additivity rule for the mean apparent molal volume and compressibility at infinite dilution held, and the excess volume and compressibility changes on mixing were obtained. For the system of glycine-PEG-H₂O, the additivity rule for the mean apparent molal compressibility at infinite dilution did not hold. While the mean apparent molal volume and compressibility changes were negative and positive for the systems of another amino acid-PEG-H₂O, respectively, where amino acids were valine, isoleucine, leucine, phenylalanine, and tryptophan. These results suggest that glycine and alanine are excluded from the hydration layer around PEG chain and the amino acids with a larger side chain than alanine are bound to the PEG chain due to the hydrophobic interaction. The hydration number per monomer around PEG chain was estimated to be 3.9.     

Synthesis of protected peptides from the human IgG1 hinge region on PEG support using disulfide bond synthons and alkaline or enzymatic detachment

Peptides from the hinge region of human IgG1 are potential defined carriers of synthetic immunogens. Their synthesis was carried out on the soluble support—PEG-OMe 2000 using disulfide bond synthons. The loading capacity of the polymer was increased twofold by anchoring the lysine as a simple branching unit. The amino acid leucine was used as an enzymatically cleavable linker. Peptide detachment from the polymer was performed either by classical ester bond saponification or newly by peptide bond cleavage catalyzed by thermolysin in water.     

聚乙二醇蓄热调温性能及其在功能纺织品上的应用

对聚乙二醇(PEG)的自身交联及其与纤维素纤雏之间的交联反应进行了研究，探讨了交联前后PEG热活性的变化，并对PEG在焙烘交联时的受热稳定性以及分子量对热活性的影响进行了讨论。研究表明，PEG发生交联反应后，热性能参教产生偏移，热活性降低；热活性与分子量有直接关系；过高的焙烘温度将导致PEG氧化降解，热活性下降。在适宜的工艺条件下，纺织品经PEG后整理可获得热活性。