CNT表面修饰对Pt/CNT在邻氯硝基苯加氢反应中催化性能的影响

用乙二醇还原法制备了碳纳米管(CNT)负载的铂催化剂(Pt/CNT).考察了CNT化学修饰与物理修饰对催化剂的影响.CNT化学修饰采用H2SO4-HNO3氧化法,物理修饰采用十二烷基硫酸钠(SDS)吸附法.用X射线衍射、透射电子显微镜、电感耦合等离子发射光谱、H2程序升温脱附、傅里叶变换红外光谱和元素分析对Pt/CNT催化剂进行了表征,并以邻氯硝基苯选择加氢为探针反应考察了Pt/CNT的催化性能.结果表明,化学修饰与物理修饰都能在CNT表面引入一定数量的活性位,有助于促进Pt异相成核,提高Pt的分散性,进而提高催化剂的活性.SDS在一定浓度下可形成特定结构的胶束,导致形成特定形貌的Pt纳米粒子.     

邻氯硝基苯在Pd/C催化剂上加氢反应机理及添加Cu对邻氯苯胺选择性的影响

本文研究了邻氯硝基苯在5%Pd/C催化剂上加氢为邻氯苯胺和苯胺的反应机理。结果表明,在常压下,邻氯苯胺和苯胺的选择性分别为~70%和~30%,且不随转化率增加而变化。在加压(1.0 Mpa)条件下,也有类似规律。因此,说明邻氯苯胺和苯胺分别是两个平行反应的产物。通过测定该反应各步骤的初始反应速率,进一步证实了这一结论。在认识反应机理的基础上,制备出可有效抑制脱氯的Cu-Pd/C双金属催化剂,在不加脱氯抑制剂的情况下,可使邻氯硝基苯加氢制备邻氯苯胺的选择性提高到96%以上。     

The effect of temperature on the behavior of poly(o-chloroaniline) salts: conductivity and spectral studies

Conducting poly(o-chloroaniline) salis have been prepared by chemical polymerization of o-chloroaniline with five different acids. Composition and the extent of dopant in poly(o-chloroaniline) salt systems have been determined. Poly(o-chloroaniline) samples have been heat treated at four different temperatures 150, 200, 275 and 375°C and characterized by electron paramagnetic, infrared and electronic absorption spectral measurements. Thermal stabilities of the chemically synthesized poly(o-chloroaniline) salts have been studied by spectral methods. It was found that the polymer is apparently stable up to 200°C, and at around 275°C crosslinking takes place. It is inferred that the electron paramagnetic resonance signal observed in the conducting material does not arise from the current-carrying species, but rather from neutral paramagnetic species. No definite correlation exists between conductivity and the extent of dopant or spin concentration.     

镍负载量对邻氯硝基苯加氢制邻氯苯胺Ni/TiO2催化剂性能的影响

 用等体积浸渍法制备了一系列不同镍负载量的负载型Ni/TiO2催化剂,并将其应用于邻氯硝基苯加氢制邻氯苯胺的反应. 采用N2吸附、 X射线衍射、程序升温还原、透射电镜、 H2化学吸附及间歇加压釜式反应器活性评价等方法,考察了镍负载量对Ni/TiO2催化剂的物化性质及邻氯硝基苯加氢反应性能的影响. 结果表明,随着镍负载量的增加, Ni/TiO2催化剂上邻氯硝基苯的转化率逐渐提高; 当镍负载量超过30%时,催化剂的活性和选择性不再明显变化. 当催化剂中镍负载量高于20%时,在温度343 K、 氢压1.0 MPa和催化剂/邻氯硝基苯质量比1/10的条件下反应210 min后,邻氯硝基苯的转化率和邻氯苯胺的选择性均高于99%, 催化剂具有良好的应用前景. 分析表明,影响Ni/TiO2催化剂性能的主要因素为催化剂表面镍晶粒的活性表面积以及载体TiO2与金属镍之间的强相互作用.