计算机模拟织物变形形态的研究现状

介绍了国外计算机图形学界对织物变形形态的研究现状．按建模原理分为几何方法。物理方法及综合方法．     

Characterization of the behaviour of flavour microcapsules in cotton fabrics

Nanotechnology processes have recently been introduced into the textile field. One of these processes involves encapsulated nanoparticles or nanoproducts, known as microcapsules. They are available with a wide range of products which confer different properties related to the nature of the encapsulated product. The composition of the wall material determines the release of the product into the fabric and is the object of study in the present work. The behaviour of microencapsulated peppermint was analyzed on cotton fabrics.Different application methods have been tested, impregnation versus bath exhaustion. As impregnation turned out to be the most efficient, some recipes were assayed and the effect of microcapsules on maintenance conditions was evaluated in order to determine the most suitable method with the longest lasting effect on fabrics.The effect of microcapsules is usually measured by the presence of a property such as odour measurements when flavours are encapsulated. The aim of this work is to explain the behaviour of the cotton fabrics with microcapsules bound to their fibers, to determine the relationship between their macroscopic properties and microscopic characteristics. A procedure based in FTIR spectroscopy is also proposed to quantify the presence of microcapsules in the fabrics.IR spectra of the textiles were obtained to determine the presence of microcapsules, which was corroborated by SEM techniques.     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

Studies on the disposable obstetrical dressings sterilized by radiation and the effect of its application

In order to attain an optimum sterilization treatment to obstetric dressings, a new product made by us, with ⁶⁰Coγ-ray, the effects of radiation on standard bacteria pseudomonas aeruginosa ATcc27853, Escherichia coli ATcc25922, Staphylococcus aureus ATcc25923, Clostridium PB6KA, short Bacillus E60163202 and HBSAg were studied. Results showed that at the absorbed dose of 10 kGy, all the bacteria, bacillus and HBSAg were killed off, and sterilized with the dose, the dressings can completely accord with the demands of hygiene, which was further confirmed by microbiological and poisonous tests and the effects of clinical application. In Nov. 1988, the dressings was awarded the excellent prize in the 1st international exhibition of patent, new technique and new equipment in Guangzhou; its effective application is also reported in the paper.     

Photodegradation of polypropylene thermal bonded non-woven fabric

Samples of thermal bonded polypropylene non-woven fabrics were exposed to light from two TUV 30W G30T8 Philips lamps (λ = 253.7 nm) in a covered open-air chamber at room temperature (25 °C and 55% relative humidity) for different periods of time. In order to determine the state of degradation, the samples were examined by optical microscopy, scanning electron microscopy, staining with an isopropanol solution of methylene blue and Sudan III, colourimetry, Fourier transform infrared (FTIR) spectroscopy and density measurements. Although the bonded areas formed under complex thermal and mechanical deformations during the fabric production, no localized staining was observed. The colour of the irradiated and stained fabrics changed uniformly due to the even production of polar groups in the process of irradiation. It was found that the change of redness and blueness of degraded and stained samples can be correlated linearly with the evolution of POOH groups as determined by FTIR spectroscopy. Products containing carbonyl (CO), hydroxyl and/or hydroperoxide (POOH) groups increase with time of degradation with a non-linear relation. It was also observed that the density and 997 cm⁻¹/972 cm⁻¹ FTIR absorbance ratio increases with degradation time. Density fluctuation and the build up of degradation products caused fibre cracks and embrittlement.     

液相色谱-质谱法测定纺织品和皮革制品中痕量全氟辛烷磺酸盐

建立了纺织品和皮革制品中全氟辛烷磺酸盐(PFOS)的液相色谱-二级质谱(LC-MS2)测定方法。样品经0.1mol/L HCl和甲醇超声波振荡提取,高效液相色谱分离;色谱柱为Zorbax SB-C18;流动相为V(甲醇)∶V(10mmol/L乙酸铵水溶液)=70∶30,流速为0.3mL/min。采用负离子模式的电喷雾质谱检测。以一级质谱得到的准分子离子m/z499作为母离子,进行二级质谱(MS2)分析。选择MS2的碎片离子m/z169、230、280、330及419定性确证,MS2总离子流色谱(TIC)峰面积定量。实验优化了样品提取方法和色谱、质谱条件,并对二级质谱碎裂机理和特征离子进行了研究。结果表明,本法简便快速,准确可靠,相对标准偏差小于8.6%,回收率在90%~99%之间;检出限为1.5mg/kg,远低于欧盟指令50mg/kg的限量规定。本方法已成功应用于纺织品、皮革制品中痕量PFOS的测定。     

聚丙烯纤维辐射接枝进展

本文对聚丙烯纤维的辐射接枝方法、特征和机理、以及其研究进展和表征进行了扼要综述。     

ADSORPTION CAPACITY OF ACTIVATED CARBON FIBER FABRIC IN CYANIDE LEACHING LIQUOR OF GOLD ORES

1. INTRODUCTION Reclamation of gold in liquid of gold with activated carbon fiber (ACF) is reported. ACF possessed numerous advantages, such as high adsorption capacity, great adsorption rate and high recovery of gold. It was generally considered tha…     

Hydrophobicity modification of woven cotton fabric by hydrophobic fumed silica coating

Water repellency of woven cotton fabric was achieved by coating with the aqueous dispersion containing organosilane agent (HDTMS) and fumed silica. The coating agents were applied using padding method and then followed by batching the coated fabric at the ambient temperature for 24 h to allow the condensation reaction between HDTMS silanol group and fumed silica silanol group, rendering silica particles hydrophobic. An ultrasonicator was employed to prepare the homogenous coating dispersion. The water repellency evaluated by water contact angle determination which showed the contact angle over 110° was obtained with low amount of applied HDTMS of 1 wt%. The effect of fumed silica addition on an increase in fiber surface roughness geometry showed the influential result in improving the water contact angle. From durability to washing test, the hydrophobic coatings evidenced from SEM and ATR/FTIR remained adhering to fiber surface, indicating the durability. After washing, the coating on the fabric with fumed silica addition appeared to be scatter particles which made a contribution to the higher contact angle value when compared to sheet-like layer coating in case of HDTMS coating alone.     

Eco-dyeing and functional finishing of wool fabric based on Portulaca oleracea L. as colorant and Musa basjoo as natural mordant

Biomass energy is the most acknowledged renewable resource due to its universality, richness, and renewability. This study utilized a Portulaca oleracea L. plant as a natural colorant for wool fabric dyeing with a high color yield at optimum extraction and dyeing conditions. To evaluate the dyeing mechanism and feasibility of the extracted dyes, we analyzed and characterized the molecular structure and nano-level particle size. The dyeing kinetics and the morphology of dyed fabrics were integratedly explored; the adsorption process of wool fabric on natural colorant molecules was increasingly in line with the pseudo-second-order kinetic adsorption model. Further, the dyeing effects of wool fabrics were compared to that of Musa basjoo mordant and synthetic dyes to confirm the superior color depth (K/S value 23.53), biological function as anti-ultraviolet (UPF value 253.47), and anti-bacterial activity (antibacterial rate of Staphylococcus aureus/Escherichia coli was 71.3%/37%). Our findings provide a feasible scheme for providing deep color and biological activity to wool fabrics. This has broad application prospects in the field of eco-friendly textile materials.