Directly‐coupled‐column ultra‐fast liquid chromatography with diode array detection method for the rapid quantification of allergenic disperse dyes in water preconcentrated by magnetic solid‐phase extraction

A directly‐coupled‐column ultra‐fast liquid chromatography coupled with diode array detection method for the determination of 12 allergenic disperse dyes in river water at sub‐ppb levels has been developed and successfully validated. The analytical method is based on the use of two different reversed‐phased columns connected through a two‐position switching valve. A baseline separation was achieved by proper selection of stationary phases, mobile phases, and the use of a gradient elution in both dimensions. Furthermore, an easy‐to‐handle magnetic solid‐phase extraction procedure was developed for the preconcentration of 12 allergenic disperse dyes from river water. An enrichment factor of 100 times was obtained. The results showed excellent performance in terms of trueness (76.8–99.0%), precision (intraday: 2.2–8.0%, interday: 3.3–8.2%), and sensitivity (limits of determination, 0.027–1.46 μg/L). Twenty real samples collected from the outfalls in the Yaojiang, Yongjiang and Fenghuajiang estuary were analyzed, and three of the studied compounds were found in one collected sample (12.6 μg/L for disperse blue 7, 11.6 μg/L for disperse blue 106, and 0.22 μg/L for disperse blue 3).     

周向导波在空心圆柱体中传播的数值模拟研究

在石油、化工、食品和城市供水等行业,由于腐蚀等原因而引起泄漏事故,造成巨大的经济损失和资源浪费.因此,能够预先检测到管道缺陷避免事故发生显得十分重要.基于弹性动力学理论,利用Matlab编程实现周向导波在空心圆柱体中传播的数值模拟.利用特征函数展开法计算出周向导波的频散曲线及0.6MHz和1MHz各个模态的时域波形图并据此分析激励方式同周向导波传播的关系,频率为1MHz或0.6MHz时,1和2模态在空心圆柱壳中传播的周向导波中处于主导地位:各模态的径向或周向位移幅度会受到激励入射角的影响而变化并且周向导波的位移幅度随着激励入射角的增加而增加:得到特定频率下,周向导波各模态径向、周向位移的变化关系.本文结果为进一步利用实验方法研究周向导波在空心圆柱体中传播特性和缺陷检测奠定了基础.     

pH-Sensitive Dye-Polyether Derivatives as Dispersants for Its Parent Dye. Part 1: Synthesis and Hydrolysis Behavior

A series of dye-polyether derivatives, supposedly to be used as dispersants for parent dye, were synthesized by grafting poly(oxyalkylene)-amines based on differing both molecular weights and degrees of hydrophilicity/hydrophobicity, onto C.I. disperse red 60 via a stable urea linkage. The structures of the dye-polyether derivatives were characterized by FTIR, ¹H NMR, and SEC. The influence of pH on the hydrolysis behaviors of the dye-polyether derivatives were studied in buffered aqueous solutions within the pH range of 4 to 10. The hydrolysis of dye-polyether derivatives was pH dependent and relatively faster in mild alkaline buffer solution than in acidic one. The influence of poly(oxyalkylene)-amine structure on the hydrolysis behavior was also investigated; it was found that the hydrolysis rate is affected little by the molecular weight and increases with the increasing hydrophilicity of the poly(oxyalkylene)-amine.     

Synthesis,Characterization and Properties of a Novel Environmentally Friendly Mono Azo Disperse Dye and Its Application on Polyethylene Terephthalate (PET)

The aim of this research is to achieve the synthesis of a novel mono azo disperse dye containing both a β‐naphthyl acetate group and carboxylic acid ester group and application on PET fabric. In this study the dyeing properties have also been investigated. The synthesized dye was characterized using UV‐Vis, FTIR, ¹H NMR and ¹³C NMR spectroscopic techniques. To investigate alkali‐clearability, both alkali‐hydrolysis behavior and the effect of its fastness properties with regard to PET fabric were examined. This dye showed a reasonable level of hydrolysis under relatively mild alkaline conditions. The application of the dye to PET fabric showed good leveling and building up properties. Estimating fastness properties of the dyed fabric showed excellent wash, rubbing fastness, good light and sublimation fastness. The results furthermore displayed that the synthesized dye offers the option of alkali‐clearing process over that of a conventional reduction‐clearing process. Therefore, the value of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) and water pollution as well as the expenditure of production were decreased.     

甲醇乳化柴油分散特性的研究

利用显微摄像技术及算术统计的方法表征了甲醇乳化柴油分散相-甲醇的平均粒径。研究了甲醇乳化柴油分散相（甲醇）的粒径分布随高速分散器转子转速、乳化时间、乳化剂用量和甲醇的质量分数等参数的变化。结果表明,甲醇乳化柴油分散相的平均粒径随转速、乳化剂用量的增加而减小,但随甲醇含量的增加而增大;当乳化时间为2min和转子转速为5×2800r/min,乳化剂的质量分数为5%和甲醇的质量分数为10%时,甲醇乳化柴油中分散相存在最佳的分散度,其值为16μm。
     

吡啶酮偶氮分散染料光谱性能

吡啶酮分散染料应用性能优异 ,其色谱主要为黄色及橙色 ,尤以黄色为主 [1～ 3]。Cheng和 Peng等 [2 ,3] 对以氨基噻二唑类和苯系芳胺为重氮组分的吡啶酮类染料的可见光谱及互变异构进行了研究 ,Ertan等 [4 ] 研究了以氨基噻唑和氨基苯并噻唑为重氮组分的吡啶酮偶氮染料的可见光谱 ,结果表明上述染料色谱主要仍为黄色。为得到具有更深色谱的吡啶酮类染料 ,我们用不同的重氮组分合成了一系列吡啶酮分散染料 ,研究了其在不同溶剂及不同 p H值下的光谱 ,发现该类染料亦可达到红、甚至蓝色谱 ,其中染料 1 a、1 b及 2 b3个染料结构未见报道。O2 …     

Disperse red 1 end capped oligoesters. Synthesis by noncatalyzed ring opening oligomerization and structural characterization

The synthesis of novel azofunctional oligoesters through bulk ring opening of ε‐caprolactone and D ,L ‐lactide (LA) at 100 and 130 °C, respectively, mediated by N‐ethyl‐N‐(2‐hydroxyethyl)‐4‐(4‐nitrophenylazo)aniline (Disperse Red 1) (DR1) is described. The synthetic procedure allows “clean” products because no catalysts were used in the reaction. Moreover, DR1 moiety is showed for the first time to promote the ring opening of cyclic esters. The molecular structure of the obtained oligoesters was established by NMR spectroscopy, MALDI ToF MS and electrospray ionization mass spectrometry (ESI MS). ESI‐MS/MS fragmentation experiments were used to demonstrate the nature of the chain end groups (hydroxyl and DR1). Intermolecular transesterification reactions were proved by mass spectrometry studies at least in the case of LA oligomerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 534–547, 2009     

Flows near stagnation points in non-orthogonally colliding disperse viscous flows

Within the framework of a two-fluid dusty-gas model, a family of steady self-similar flows near a stagnation point formed by two different non-orthogonally colliding viscous incompressible streams, one of which contains solid inertial particles, is studied. The limiting case of non-orthogonal impingement of a viscous disperse medium on a rigid wall is considered separately. The possibility of the formation of multiple particle accumulation zones on the envelopes of particle trajectories and on the contact (in the limiting case, rigid) surface is demonstrated. The local structure of the particle velocity and concentration fields is studied. The threshold values of the governing parameters corresponding to qualitative flow pattern reconstruction are found.     

Nonlinear Deformational Properties of Dispersely Strengthened Materials

A method and an algorithm for determining the effective deformational properties of dispersely strengthened materials with a physically nonlinear matrix and quasi-spheroidal linearly elastic inclusions are elaborated based on the stochastic differential equations of the physically nonlinear theory of elasticity. Their transformation to integral equations and the application of the method of conditional moments reduce the problem to a system of nonlinear algebraic equations, whose solution is constructed by the iteration method. The deformation diagrams as functions of the volume content of inclusions are investigated.