Photosynthesis of Benzonitriles on BiOBr Nanosheets Promoted by Vacancy Associates

Photocatalytic organic functionalization reactions represent a green, cost-effective, and sustainable synthesis route for value-added chemicals. However, heterogeneous photocatalysis is inefficient in directly activating ammonia molecules for the production of high-value-added nitrogenous organic products when compared with oxygen activation in the formation of related oxygenated compounds. In this study, we report the heterogeneous photosynthesis of benzonitriles by the ammoxidation of benzyl alcohols (99 % conversion, 93 % selectivity) promoted using BiOBr nanosheets with surface vacancy associates. In contrast, the main reaction of catalysts with other types of vacancy sites is the oxidation of benzyl alcohol to benzaldehyde or benzoic acid. Experimental measurements and theoretical calculations have demonstrated a specificity of vacancy type with respect to product selectivity, which arises from the adsorption and activation of NH₃ and O₂ that is required to promote subsequent C−N coupling and oxidation to nitrile. This study provides a better understanding of the role of vacancies as catalytic sites in heterogeneous photocatalysis.     

Electrophoreted Zn-TiO2-ZnO nanocomposite coating films for photocatalytic degradation of 2-chlorophenol

TiO₂-ZnO nano-powders with different TiO₂/ZnO ratios have been synthesized by hydrothermal method. Nanocomposite coating films consisting of TiO₂-ZnO and Zn with thickness of 20 μm have been electrophoreted on steel plates by rapid plating from a ZnO-based alkaline bath. X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis were used to investigate the structure, the size distribution, and the composition of prepared nano-powders and plated materials. The effect of the operating parameters such as powder contents, pH and current density on the electrophoresis process has been investigated and optimum conditions of coating process were determined. Corrosion properties of plated samples have been studied by salt spray test. The catalytic activity of the prepared nanocomposite Zn-TiO₂-ZnO films for the photocatalytic degradation of 2-chlorophenol (2-CP) was measured.     

磁载纳米TiO2光催化剂的制备及其光催化性能研究

采用肼((NH2)2*H2O)还原硝酸铁(Fe(NO3)3)法制备纳米级磁基体(Fe3O4), 以聚乙二醇对其表面进行改性, 通过溶胶-凝胶法制得TiO2/Fe3O4磁载纳米TiO2光催化剂, 并用于光催化降解橙黄-II, 对其活性进行评价. 结果表明 TiO2/Fe3O4光催化剂的降解率在第一次使用时与纯TiO2相近, 三次循环使用后, 仍能保持较高的催化活性. 催化剂的最佳用量为4 g/L, 在酸性和碱性环境中均能保持很好的催化活性.     

Controlling optical properties and electronic energy structure of I–III–VI semiconductor quantum dots for improving their photofunctions

I–III–VI multinary semiconductors, which have low toxicity, are attracting much attention as quantum dot (QD) materials for replacing conventional binary semiconductors that contain highly toxic heavy metals, Cd and Pb. Recently, the inherent design flexibility of multinary QDs has also been attracting attention, and optoelectronic property control has been demonstrated in many ways. Besides size control, the electronic and optical properties of multinary QDs can be changed by tuning the chemical composition with various methods including alloying with other semiconductors and deviation from stoichiometry. Due to significant progress in synthetic methods, the quality of such multinary QDs has been improved to a level similar to that of Cd-based binary QDs. Specifically, increased photoluminescence quantum yield and recently narrowed linewidth have led to new application fields for multinary QDs. In this review, a historical overview of the solution-phase synthesis of I–III–VI QDs is provided and the development of strategies for better control of optoelectronic properties, i.e., electronic structures, energy gap, optical absorption profiles, and photoluminescence feature, is discussed. In addition, applications of these QDs to luminescent devices and light energy conversion systems are described. The performance of prepared devices can be improved by controlling the optical properties and electronic structures of QDs by changing their size and composition. Clarification of the unique features of I–III–VI QDs in detail will be the base for further development of novel applications by utilizing the complexity of multinary QDs.     

Preparation and characterization of TiO2 photocatalysts co-doped with iron (III) and lanthanum for the degradation of organic pollutants

Titanium dioxide photocatalysts co-doped with iron (III) and lanthanum were prepared by a facile sol-gel method. The structure of catalysts was characterized by X-ray diffraction (XRD), Raman spectroscopy, UV-vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were evaluated by the degradation of methylene blue in aqueous solutions under visible light (λ > 420 nm) and UV light irradiation. Doping with Fe³⁺ results in a lower anatase to rutile (A-R) phase transformation temperature for TiO₂ particles, while doping with La³⁺ inhibits the A-R phase transformation, and co-doping samples indicate that Fe³⁺ partly counteracts the effect of La³⁺ on the A-R transformation property of TiO₂. Fe-TiO₂ has a long tail extending up the absorption edges to 600 nm, whereas La-TiO₂ results in a red shift of the absorption. However, Fe and La have synergistic effect in the absorption of TiO₂. Compared with Fe³⁺ and La³⁺ singly doped TiO₂, the co-doped simple exhibits excellent visible light and UV light activity and the synergistic effect of Fe³⁺ and La³⁺ is responsible for improving the photocatalytic activity.     

Azo dyes degradation using TiO2-Pt/graphene oxide and TiO2-Pt/reduced graphene oxide photocatalysts under UV and natural sunlight irradiation

The photocatalytic degradation of azo dyes with different structures (amaranth, sunset yellow and tartrazine) using TiO₂-Pt nanoparticles (TPt), TiO₂-Pt/graphene oxide (TPt-GO) and TiO₂-Pt/reduced graphene oxide (TPt-rGO) composites were investigated in the presence of UV and natural sunlight irradiation. The composites were prepared by a combined chemical-thermal method and characterized by Transmission Electron Microscopy (TEM), X-ray powder diffraction (XRD), Infrared (FTIR) and UV–Vis spectroscopy. The modification of TiO₂-Pt with graphene oxide shifted its optical absorption edge towards the visible region and increased its photocatalytic activity under UV and natural sunlight irradiation. The efficiency of catalysts on azo dyes degradation (in similar conditions) reached high values (above 99%) under sunlight conditions, proving the remarkable photocatalytic activities of obtained composites. TPt-GO nanocomposite exhibited higher photoactivity than TPt or TPt-rGO, demonstrating degradation efficiencies of 99.56% for amaranth, 99.15% for sunset yellow and 96.23% for tartrazine. The dye photodegradation process follows a pseudo-first-order kinetic with respect to the Langmuir-Hinshelwood reaction mechanism. A direct dependence between azo dyes degradation rate and chemical structure of dyes has been observed.     

Physicochemical and photocatalytic properties of the ZnO particles synthesized by two different methods using three different precursors

ZnO particles with different morphological forms and various scale sizes were successfully synthesized as photocatalysts using two different methods (sol–gel and precipitation) and three precursors (zinc acetate dihydrate, zinc nitrate hexahydrate, and zinc sulfate heptahydrate). These materials were calcined at 500 °C for 3 h and characterized by various physicochemical techniques such as X-ray diffraction, Fourier transform infrared, transmission electron microscopy, S_BET, and UV–vis diffuse reflectance. The results showed that the crystalline structure, size, and morphology of the ZnO particles are strongly influenced by the preparation method and by the nature of the precursor used as reactant. The photocatalytic efficiency of the synthesized photocatalysts was evaluated by the photodegradation of methyl orange in aqueous solution under UV-A light. The results showed that the ZnO nanoparticles prepared the by sol–gel method from zinc acetate are more efficient than those prepared by the precipitation method.     

Physicochemcial characteristic of CdS-anchored porous WS2 hybrid in the photocatalytic degradation of crystal violet under UV and visible light irradiation

In this work, we report the synthesis of CdS-incorporated porous WS₂ by a simple hydrothermal method. The structural, morphological, and optical properties of the samples were examined by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), high resolution X-ray photoelectron spectroscopy (XPS) and UV–visible spectrometry. The photocatalytic activities were established for degradation of crystal violet (CV) under UV and visible light irradiation. The CdS-incorporated porous WS₂ hybrid demonstrated high photocatalytic activity for degradation of CV pollutant compared to pure CdS nanoparticles and porous WS₂ sheets. This result implies that the CdS-incorporated porous WS₂ promoted more electron-hole pair transformation under UV and visible light irradiation. This significant enhancement of photocatalytic efficiency of CdS-incorporated porous WS₂ photocatalyst under visible light can be ascribed to the presence of CdS nanospheres on the meshed-like WS₂ sheets which potentially improves absorption in the visible range enabled by surface plasmon resonance effect of CdS nanospheres. The photostability and reusability of the CdS-porous WS₂ were examined through recycling experiments.