用双表面活性剂为共模板合成中孔分子筛MCM-48

利用水热法以非离子表面活性剂聚乙二醇辛基苯基醚和阳离子表面活性剂十六烷基三甲基溴化铵为共模板合成了中孔分子筛MCM-48.实验中发现利用较强的范德华力和氢键,聚乙二醇辛基苯基醚可在很大程度上降低合成MCM-48所需阳离子表面活性剂的用量,且利于制备有序性好、骨架聚合度高、稳定性好的MCM-48.通过调节聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵的比例,可得到不同物相结构的分子筛.     

新型层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5] 的合成、表征及其共模板作用

在溶剂热体系中,以N,N-二乙基乙二胺为结构导向剂,合成了Al/P为3/4的层状磷酸铝[Al6P8O32][(C2H5)2NHCH2CH2NH3]2·[C2H5NH2CH2CH2NH2C2H5]单晶,并通过X射线单晶衍射结构分析.XRD,ICP,元素分析,差热-热重分析等手段进行了表征.该化合物属单斜晶系,P2(1)/c空间群,晶胞参数:a=0.90945(2)nm,b=1.46424(4)nm,c=1.87572(5)nm,β=102.672(2)°,Z=4.其阴离子层由AlO4四面体和PO3(=O)四面体单元交替连接构成,形成四、六、八元环拓扑结构,无机层以ABAB方式堆积,两种质子化的有机胺分子N,N-二乙基乙二胺及其重排产物N,N′-二乙基乙二胺填充在层间.用分子动力学模拟方法,考察了标题化合物中有机胺与无机层间的相互作用,讨论了这两种有机胺的共模板作用.     

新型三维开放骨架磷酸铝化合物的合成及晶化过程中的共模板效应

以1,2-丙二胺(1,2-DAP)为结构导向剂,在180℃加热摩尔组成为n(Al_2O_3)∶n(P_2O_5)∶n(1,2-DAP)∶n(H_2O)=1∶6∶5.5∶139的初始混合物,合成了具有AlPO-CJ31骨架结构的新型三维开放骨架磷酸铝化合物(1);加热摩尔组成为n(Al_2O_3)∶n(P_2O_5)∶n(1,2-DAP)∶n(H_2O)=1∶6∶7.5∶139的初始混合物,合成了二维层状磷酸铝化合物APDAP_(12)-150.利用X射线粉末衍射分析(XRD)、元素分析、热重/差热分析等表征手段确认了化合物1的分子式为[Al_4P_5O_(20)·H_3O·H_2O]·[H_3NCH_2CHNH_3CH_3],质子化的水分子与双质子化的1,2-丙二胺共同起到了导向化合物1的作用.调变初始混合物中1,2-丙二胺的比例可显著影响其模板效应.1,2-丙二胺比例较低[n(1,2-DAP)=5.5]时,产物为三维开放骨架化合物,而当其比例较高[n(1,2-DAP)=7.5]时,产物为二维层状化合物.     

共模板法一步合成绣球状BiOCl/Br固溶体光催化剂

以乙二醇/十二烷基三甲基溴化铵(EG/DTAB)为共模板剂,一步制得BiOCl/Br的固溶体光催化剂,利用X射线衍射仪、扫描电子显微镜、能谱仪、N2吸附-脱附仪和紫外-可见漫反射光谱仪进行了表征.结果表明,与采用溶剂热法制得的BiOCl分级微球相比,采用EG/DTAB共模板法制得的BiOCl/Br固溶体具有更明显的分层结构,呈绣球状.同时,DTAB的Br-插入到BiOCl的晶格中,形成固溶体,减小了禁带宽度.绣球状BiOCl/Br固溶体具有比商用P25、二维BiOCl纳米片和三维BiOCl分级微球更优异的可见光间接敏化降解染料性能,当nDTAB/nKCl=0.75时,制得的BiOCl/Br固溶体8 min内在可见光下对罗丹明B(Rh B)的降解率达到97.2%;1 h后在可见光下对甲基橙(MO)的降解率达到83.6%.     

Synthesis and Theoretical Investigation of a New Hybrid Polymeric Iodoplumbate Based on Co-template： [（ipq）2（pea）（Pb3I9）·DMF]n

A new iodiplumbate polymer [（ipq）2（pea）（Pb3I9）-DMF]n 1 （ipq = N-（isopentyl）- quinolinium, pea = protonated ethylamine） was synthesized by self-assembly reaction of ipq·I, PbI2 with ethylamine and structurally characterized. 1 crystallizes in the triclinic system, space group P1 with α= 1.0731（4）, b = 1.2560（4）, c = 2.0785（7） nm, α = 96.378（5）, β= 91.132（2）, γ= 100.303（5）°, V= 2.7369（16） nm^3, Z= 2, Dc = 2.770 g/cm^3,μ = 14.307 mm^-1, F（000） = 2014, R = 0.0588 and wR = 0.1345. 1 features its hybrid structure concertedly templated by two kinds of organic cations, which exhibits interesting semiconductor property. In 1, the [Pb2I6]^2 n infinite chains shape the sketch of the title compound constructed from face-sharing of ideal and distorted PbI6 octahedra. Based on the crystal structure data, quantum chemistry calculation with DFT was used to reveal the electronic structure of 1.     

Morphology-controlled synthesis of mesoporous silica with co-template of surfactant P123 and ionic liquid [Dmim]Cl

Hollow silica spheres with mesoporous wall have been synthesized with only ionic liquid ([Dmim]Cl) as the template, and meanwhile, prism-like silica tubes with mesoporous wall have been constructed with the ionic liquid and a nonionic surfactant (P123) as the co-template via sol-gel method for the first time.     

Co-templating synthesis of highly dispersed 1D ZnO nanostructures in amorphous SiO2 under hydrothermal condition

One-dimensional (1D) ZnO nanostructures were grown in amorphous SiO₂ matrix by a co-templating method under hydrothermal condition. Using ethylenediamine (EDA) groups grafted mesoporous silica MCM-41 as a co-template, the growth of 1D ZnO nanostructures was oriented by soft EDA groups and confined inside the hard mesochannels of MCM-41. The microstructure and morphology of the 1D-ZnO-nanostructures/SiO₂ composite were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray energy dispersive spectroscopy (EDS). All these results indicate that the 1D ZnO nanostructures were synthesized and highly dispersed in the amorphous SiO₂ matrix. Blue-shifted exciton absorption was observed from the co-templating synthesized sample.