生物小分子与铜锌超氧化物歧化酶相互作用的波谱学研究及其应用

本工作以ESR和NMR为主要手段,并结合其它生化方法,考察了氨基酸、核酸碱基、糖等生命基本物质,和抗坏血酸等生命必需物质与钢锌超氧化物歧化酶的相互作用,实验观测到氨基酸、核酸碱基和抗坏血酸在水溶液中可以与酶中的Cu²⁺作用而使其脱离活性部位,以小分子络合物形式游离在溶液中,同时使酶失活,脱离活性部位的Cu²⁺的比例和酶的失活程度取决于小分子配体的加入量及其与Cu²⁺的络合能力。此外,首次尝试使用ESR方法,并借助氨基酸与酶的作用,考察了铜锌超氧化物歧化酶在盐酸胍变性和热变性过程中的构象变化行为,结果表明这一方法是直观而有效的。     

抗坏血酸同顺磁离子Mn~(2+)、Gd~(3+)络会的~(13)C NMR研究

该文用顺磁离子对其近邻~(13)C核的NMR吸收增宽效应,系统地研究了抗坏血酸在不同溶剂中对金属离子Mn~(2+)、Gd~(3+)的配合行为.在水溶液中,抗坏血酸可通过两种配合方式与Mn~(2+)作用,但与Gd~(3+)的作用只有一种稳定的结构.在水中抗坏血酸对金属的配位活性部位分别是1位羟基氧,3位离解的羟基氧和6位羟基氧.在DMSO中,3位羟基由于H~+对该基团的静电遮蔽而变得对金属离子Mn~(2+)表现为配位惰性,同时6位羟基配位活性较大增强.对Gd~(3+)来说,此时没有优势配位活性部位存在.文章还讨论了抗坏血酸在H_2O-DMSO混合溶剂中的~(13)C NMR谱及在DMSO中NaOH对其~(13)C NMR谱及其与金属络合结构的影响.     

伏安型植物组织生物微电极的研究——茄子组织碳糊微电极的研究

茄子组织生物微电极在儿茶酚测定中表现出了较高的生物催化活性,而对抗坏血酸测定则为稳态响应,这表明该电极能有效地消除抗坏血酸的干扰。该电极的灵敏度高,重现性好,对多巴胺测定的线性范围为5.8×10~(-6)～6.5×10~(-4)mol/L,检出下限为:2.9×10~(-6)mol/L。     

间接光度法测定药物中的抗坏血酸

研究了一种简便的选择性高的药物中抗坏血酸含量的测定方法。该方法基于在弱酸性介质中 ,有盐酸羟胺、碘酸存在下 ,抗坏血酸还原对氨基苯磺酸与N 1 萘乙二胺盐酸盐混合体系生成的有色物质 ,体系的最大吸收波长为 5 40nm ,工作曲线的线性范围为 0 .5～ 4 .0 μg·ml- 1。方法灵敏度高 ,选择性好 ,对药用维生素C中抗坏血酸含量进行测定 ,结果满意     

Nonenzymatic Glucose Detection with Good Selectivity Against Ascorbic Acid on a Highly Porous Gold Electrode Subjected to Amalgamation Treatment

A nonenzymatic glucose sensor with good selectivity for the ascorbic acid oxidation is presented. After the gold polycrystalline electrode was subjected to amalgamation treatment, two advantageous effects were observed. One is the enhancement of the surface roughness and the other is an increase in the catalytic current in the glucose oxidation. Besides the known first effect, the latter provided another advantageous effect in a fabrication of nonenzymatic glucose sensor. Using a gold electrode subjected to amalgamation treatment for 60 s, two calibration curves for glucose oxidation at two different potentials of ?0.1 V and 0.25 V were obtained and compared. At the potential of ?0.1 V, at which no ascorbic acid was oxidized and no interference effect was observed, a current sensitivity of 16 μA cm^?2 mM^?1 from zero to 10 mM glucose concentration range was obtained. At the other potential of 0.25 V, at which ascorbic acid was easily oxidized, a satisfactory calibration curve with negligible ascorbic acid interference was also obtained together with a more enhanced current sensitivity of 32 μA cm^?2 mM^?1.     

Fabrication of Poly(allylamine)ferrocene Monolayer Based on Electrostatic Interaction and Its Electrocatalytic Oxidation of Ascorbic Acid

A poly(allylamine)ferrocene monolayer was built on the surface of gold electrode modified with negatively charged alkanethiol based on electrostatic interaction. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry in detail. The modified electrode was shown to exhibit excellent electrocatalytic response to the oxidation of ascorbic acid. The anodic overpotential was reduced by about 170 mV compared with that obtained at a bare gold electrode. The modified electrode possesses several attractive features, such as simple preparation, fast response and good chemical and mechanical stability.     

Fluorimetric determination of ascorbic acid with o-phenylenediamine

A simple and sensitive fluorimetric method for the determination of ascorbic acid (AA) is described. The method is based on the condensation reaction between AA and o-phenylenediamine (OPDA) in the absence of the oxidant. The fluorescence intensity is measured at excitation and emission wavelengths of 360 and 430 nm, respectively. Under optimum condition, a linear relationship is obtained between the fluorescence intensity and the concentration of AA in the range of 0.05-40 μg ml⁻¹. The detection limit is 0.006 μg ml⁻¹, which is obviously lower than that of other fluorimetric methods reported.     

抗坏血酸和尿酸在胶束体系中的电化学行为及选择性测定的应用

以玻碳电极为工作电极,在PBS中用循环伏安法研究了抗坏血酸(AA)和尿酸(UA)在胶束体系中的电化学行为。在溴化十六烷基吡啶(CPB)胶束体系中,AA和UA的氧化峰电流增加,峰电位负移;在十二烷基苯磺酸钠(SDBS)胶束体系中,AA和UA的氧化峰电流减小,峰电位正移。在CPB中,AA和UA的氧化峰电位相差约270 mV,以此建立了AA和UA的同时测定方法。用微分脉冲伏安法测定AA和UA的氧化峰电流分别在1.0×10-6~1.0×10-2mol/L和5.0×10-7~1.0×10-3mol/L的范围内与各自的浓度范围呈良好的线性关系。在200倍AA共存时UA的检出限为5.0×10-6mol/L。此方法可应用于人体尿样中UA的测定,结果令人满意。     

Electropreparation of Poly(benzophenone‐4) Film Modified Electrode and Its Electrocatalytic Behavior Towards Dopamine,Ascorbic Acid and Nitrite

The oxidation of benzophenone‐4 (2‐hydroxy‐4‐methoxybenzophenone‐5‐sulfonic acid) at glassy carbon electrode gives rise to stable redox active electropolymerized film during repetitive potential cycling between 0 to 1.3 V (Ag/AgCl). Cyclic voltammogram of poly(benzophenone‐4) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 51 mV/pH. The electrocatalytic behavior of poly(benzophenone‐4) film modified electrode towards oxidation of dopamine, ascorbic acid and reduction of nitrite was investigated. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(benzophenone‐4) film compared to bare glassy carbon electrode. For dopamine, the overpotential was reduced about 180 mV. Feasibility of utilizing poly(benzophenone‐4) film coated electrode in analytical estimation of dopamine, ascorbic acid and nitrite was also demonstrated.     

All-solid-state potentiometric sensors for ascorbic acid by using a screen-printed compatible solid contact

The development of all-solid-state potentiometric ion selective electrodes for monitoring of ascorbic acid, by using a screen-printed compatible solid contact is described. The applied methodology is based on the use of PVC membrane modified with some firstly-tested ionophores (triphenyltin(IV)chloride, triphenyltin(IV)hydroxide and palmitoyl-l-ascorbic acid) and a novel one synthesized in our laboratory (dibutyltin(IV) diascorbate). Synthesis protocol and some preliminary identification studies are given. A conductive graphite-based polymer thick film ink was used as an internal solid contact between the graphite electrode and the PVC membrane. The presence and the nature of the solid contact (plain or doped with lanthanum 2,6-dichlorophenolindophenol (DCPI)) seem to enhance the analytical performance of the electrodes in terms of sensitivity, dynamic range, and response time. The analytical performance of the constructed electrodes was evaluated with potentiometry, constant-current chronopotentiometry and electrochemical impedance spectroscopy (EIS). The interference effect of various compounds was also tested. The potential response of the optimized Ph₃SnCl-based electrode was linear against ascorbic acid concentration range 0.005-5.0 mM. The applicability of the proposed sensors in real samples was also tested. The detection limit was 0.002 mM ascorbic acid (50 mM phosphate, pH 5 in 50 mM KCl). The slope of the electrodes was super-Nernstian and pH dependent, indicating a mechanism involving a combination of charge transfer and ion exchange processes. Fabrication of screen-printed ascorbate ISEs has also been demonstrated.