An amperometric detector with a tubular electrode deposited on the capillary for capillary liquid chromatography

A procedure is described for the preparation of a tubular electrode by chemical deposition of platinum at the end of a fused-silica capillary. The properties of the electrode were tested under liquid chromatographic conditions, demonstrating that both the static and the dynamic behaviour of the detection system satisfy the requirements of capillary chromatographic separations and compare well with a wall-jet amperometric system and with UV photometric detection. The detection system described is easy to prepare and does not require any time-consuming positioning of the electrode system as it is integrated into the separation part of the apparatus.     

Electrodeposited Nickel/Platinum Alloy as a Biosensor for Acetyl Choline

Nickel and platinum find extensive use in preparation of biosensors. In the present work, Ni/Pt alloy was plated on graphite to make acetylcholine sensor. The microstructure, surface composition and electrochemical performance of the electrode was analyzed by different techniques. The sensing performance was evaluated by cyclic voltammetry. The prepared alloy plate exhibited very good linear relationship between acetyl choline concentration and response current. The sensitivity and reproducibility of the prepared electrode were found better than other nickel electrodes reported.     

Oxidase/peroxidase bilayer-modified electrodes as sensors for lactate,pyruvate, cholesterol and uric acid

Enzyme heterobilayer-modified electrodes were fabricated by successively covalently binding to the surface of a tin(IV) oxide plate horseradish peroxidase (HRP), then an oxidase (lactate, pyruvate or cholesterol oxidase or uricase), which liberates hydrogen peroxide by reaction with the respective substrate. The cooperative action of oxidase-HRP leads to an efficient amperometric sensor system with the minimum amount of enzyme immobilized on an electrode.     

Amperometric sensor for hypoxanthine and xanthine based on the detection of uric acid

The construction and response of an immobilized enzyme modified electrode as an amperometric sensor is described. Xanthine oxidase was adsorbed on a carbon paste electrode and physically entrapped with a semipermeable membrane. Uric acid, the product of the enzymatic reaction, was oxidized electrochemically at +0.4 V vs. Ag/AgCl, yielding a steady-state current directly related to the bulk concentration of the substrate. Hypoxanthine and xanthine were determined in the range 5–100 μM at Ph 7.2 with good precision. Interferences are discussed.     

Preparation of Fluorine‐Doped Lead Dioxide Modified Electrodes for Electroanalytical Applications

The effect of F^? on the modified films of lead dioxide in morphology and structure was studied. The results obtained by cyclic voltammetry (CV), X‐diffractometer (XRD) and scanning electron microscope (SEM) techniques indicated that F^? could change the magnitude of lead dioxide crystal grain and the preferred crystallizing orientation on the substrate surface, even though it didn't change the basic structure of PbO₂. When the modified electrode was applied as an analytical sensor to determine phenolic compounds, the linearity was in the range of 2×10^?5 – 1×10^?3 mol/L and the detection limit was 2.5×10^?6 mol/L. It was all found that the stability and reproducibility of the oxide‐modified electrodes were improved by additional F^?.     

A Protein‐Resistant Matrix for Electrochemical Based Recognition Assays

In this work, two well known polymers, carboxymethyl dextran and poly(ethyleneglycol), are used for easily producing a platform for electrochemical affinity assays, avoiding nonspecific adsorption of proteins. In this way, modified electrode surfaces able to bind a recognition agent are constructed through simple and reliable reactions.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.     

Selective enzyme amplification of NAD/NADH using coimmobilized glycerol dehydrogenase and diaphorase with amperometric detection

A flow system for substrate recycling of NAD⁺/NADH was set up with an enzyme reactor containing coimmobilized glycerol dehydrogenase (GDH) and diaphorase. The product from the diaphorase catalysis, hexacyanoferrate(II), aws detected amperometrically at a glassy carbon electrode. The amplification factor was 150 for a reactor volume of 100 μ l at a flow-rate of 0.5 ml/min. With a stopped flow of four minutes, the signal increased another 88 times, resulting in a signal amplification of 13 300 times. Equations are derived for the amplification factor and used for a discussion of the optimization of amplification systems. The K_m for GDH with glycerol as a substrate was found to be 5 × 10⁻³ M at pH 8.0. GDH from Cellulomonas sp. was purified on a gel filtration column and the purified enzyme showed a specificity toward NAD⁺, compared to NADP⁺, that was higher than 99.9%. Due to the NAD⁺ specificity of the purified GDH, the enzyme amplification system reported here could be used in detection systems for enzyme immunoassays when using alkaline phosphatase as a label and NADP⁺ as a substrate. The stability of immobilized GDH and diaphorase is several orders of magnitude better than that of alcohol dehydrogenase, which is the enzyme commonly used for NAD⁺-specific detection in these applications.     

Mediated amperometric biosensor for hypoxanthine based on a hydroxymethylferrocene-modified carbon paste electrode

An amperometric enzyme electrode for the determination of hypoxanthine in fish meat is described. The hypoxanthine sensor was prepared from xanthine oxidase immobilized by covalent binding to cellulose triacetate and a carbon paste electrode containing hydroxymethylferrocene. The xanthine oxidase membrane was retained behind a dialysis membrane at a carbon paste electrode. The sensor showed a current response to hypoxanthine due to the bioelectrocatalytic oxidation of hypoxanthine, in which hydroxymethyiferrocene served as an electron-transfer mediator. The limit of detection is 6 × 10^?7 M, the relative standard deviation is 2.8% (n=28) and the response is linear up to 7 × 10^?4 M. The sensor responded rapidly to a low hypoxanthine concentration (7 × 10^?4 M), the steady-state current response being achieved in less than 1 min, and was stable for more than 30 days at 5 ° C. Results for tuna samples showed good agreement with the value determined by the conventional method.     

Amperometry of Heparin Polyion Using a Rotating Disk Electrode Coated with a Plasticized PVC Membrane

Electrochemical method of detection of heparin polyion was developed based on voltammetry of heparin on a rotating glassy carbon (GC) electrode coated with a plasticized PVC membrane. The membrane was deposited on the GC disk by spin‐coating technique using a mixture of solutions of PVC in tetrahydrofuran, and 1,1′‐dimethylferrocene (DMFc) and hexadecyltrimethylammonium tetrakis(4‐chlorophenyl)borate (HTMATPBCl) in o‐nitrophenyl octyl ether. UV/vis reflection spectrometry was used to evaluate the membrane thickness, which exhibits a linear correlation with the membrane resistance measured by impedance spectroscopy. It is shown that this electrode can be used for amperometric or coulometric detection of heparin in aqueous samples of medically relevant concentrations (1–10 U mL^?1), with a detection limit of 1.4 U mL^?1. Evidence is provided indicating that the current determining step is the reversible adsorption of the ion‐pair of heparin polyion with HTMA⁺ cation at the membrane/aqueous electrolyte interface, which is driven by oxidation of DMFc at the GC/membrane interface.