一种在弱酸性介质中有电化学发光性能的鲁米诺衍生物

报道了一种鲁米诺的衍生物-3-(1-乙酰丙酮偶氮)苯二甲酰肼在酸性介质中的电化学发光行为,该化合物与鲁米诺类似,发生两步电化学氧化反应,但其氧化电位较鲁米诺低约0.5V,在氧化铟锡玻璃电极上具有良好的电化学发光性能,有效地避免了氧化铟锡玻璃电极本身的发光干扰.不仅在碱性介质中具有较高的电化学发光效率,而且在酸性介质中也产生较稳定的电化学发光,在1.0×10-6mol/L以上浓度,电化学发光强度与浓度有良好的线性关系.     

Scanning probe microscopy studies of PbS surfaces oxidized in air and etched in aqueous acid solutions

Natural n-type PbS single crystals have been studied using AFM, STM and STS after long-term oxidation in air at ambient temperatures and extensive etching in aqueous acid solutions, in contrast to previous work devoted to initial corrosion of fresh surfaces. The exposure of PbS to atmosphere at high relative humidity for several days yields widespread loose oxidation products; the process is much slower at low humidity. Surface morphologies diverge after the treatment in 1 M perchloric and hydrochloric acid solutions at room temperature and become widely different at elevated temperatures, displaying commonly etch pits up to several micrometers in size and depth along with rather uniformly distributed 20-100 nm protrusions of PbS phase. The changes both in topography and semiconducting properties of PbS found by tunneling spectroscopy have been explained in terms of the non-uniform distribution of donor- and acceptor-type defects D⁺/D⁻ in the metal depleted surface layer, which are generated by chemical reactions and, in turn, determine the rates of the PbS corrosion. In particular, the D⁻ centers exhibit a self-catalyzing effect on the non-oxidative local dissolution of PbS in HCl media, resulting in the deep etch pits.     

Thermodynamics of the dissociation of 2-aminopyridinium ion in synthetic seawater and a standard for pH in marine systems

Buffer solutions composed of 2-aminopyridinium chloride and 2-aminopyridine in synthetic seawater are useful as a supplement to buffers of Tris (pH 8.2) and Bis (pH 8.8) in standardizing measurements of hydrogen ion concentration (pm _H or pH(SWS)) in oceanography. The dissociation constant of 2-amino-pyridinium ion over the range of salinities (S) from 30 to 40 has now been determined from the emf of cells without liquid junction at eight temperatures (T) from 278.15 to 313.15 K. The results fit the equation pK=2498.31/T–15.3274+2.4050 lnT+S(0.012928–2.9417×10^–5T) with a standard deviation of 0.0023. Thermodynamic constants for the dissociation process and standard reference values of pm _H and pH(SWS) were derived from the data. The pm _H of the buffer consisting of 2-aminopyridinium chloride and 2-aminopyridine (each 0.04 molal) in synthetic seawater of salinity 35 varies from 7.356 at 278.15 K to 6.601 at 313.15 K.     

对-羟基苄叉丙二腈溶液在不同pH条件下吸收光谱的变化

在苄叉丙二腈衍生物系列中,N,N-二烷基氨基苄叉丙二腈及其类似化合物是研究和应用较多的一类。它们曾作为分子探针应用于高分子微环境特性和高分子聚合过程的研究。作为一种分子内的电荷转移络合物,它们在不同溶剂中的光谱行为也进行过研究,从而为进一步的开拓应用提供了重要依据。和前者相比,对-羟基苄叉丙二腈无论在基础研究或实际应用上都显得比较薄弱。正因如此,本工作合成了该化合物并对它进行了初步研     

高效毛细管电泳前沿分析法研究酸性药物那格列奈与人血浆白蛋白的结合

用高效毛细管电泳前沿分析法研究了酸性药物那格列奈与人血浆白蛋白的结合常数、结合位点和结合率。使用未涂层的毛细管柱 (4 0cm× 5 0 μmi.d .;有效柱长 32cm) ,磷酸盐缓冲溶液 (pH 7.4 ,离子强度0 .17)为背景溶液 ,在紫外检测波长 2 14nm、运行电压 18kV和重力进样 10 0s的条件下 ,利用那格列奈谱峰的平台高度和游离药物浓度的良好线性关系 (r>0 .999,n =6 ) ,测定了那格列奈的游离药物浓度。固定药物浓度 (2 0 0 μmol L ,2 5 0 μmol L) ,考察不同的蛋白质浓度对结合的影响 ;固定蛋白质浓度 (10 0 μmol L) ,考察不同的药物浓度对结合的影响。实验数据采用非线性拟和程序进行处理 ,得到了那格列奈的蛋白质结合参数。高效毛细管电泳前沿分析法测定的数据重现性良好 (RSD <2 .5 % ,n =3) ,在药代动力学和药效学研究方面具有简便、准确的优点。     

Determination of acidic constants of some phenyl-hydroxyiminoethyl quinolinium compounds

Mixed acidic constants (pK _a ) of quinolinium oximes [1-(2-phenyl-2-hydroxyiminoethyl)-1-quinolinium chloride (F-1), 1-(2-phenyl-2-hydroxyiminoethyl)-1-isoquinolinium chloride (F-2), 1-(2-phenyl-2-hydroxyiminoethyl)-1-(4-methyl)-quinolinium chloride (F-3), and 1-(2-phenyl-2-hydroxyiminoethyl)-1-(6-methyl)-quinolinium chloride (F-4)] have been determined via their UV absorption spectra recorded in the series ofBritton-Robinson's buffer solutions in thepH region 8.74–11.28 (t=25±0.5°C, =0.2). The obtainedpK _a values are in good agreement with those achieved by applying graphical methods. The followingpK _a values have been obtained: 9.93 forF-1, 9.90 forF-2, and 10.02 forF-3 andF-4.On the basis of potentiometric titrations thermodynamic acidic constants (pK _a ) of compoundsF-1,F-2,F-3, andF-4 have been determined and they were found to be 9.82, 9.71, 9.91, and 9.86, respectively. The values obtained by transferringpK _a intopK _a are in good agreement with the values obtained spectrophotometrically.

---

Bestimmung der Aciditätskonstanten einiger Phenyl-hydroxyiminoethylchinolin-Verbindungen

Zusammenfassung Die Mischaciditätskonstanten (pK _a ) der Chinolin-Oxime 1-(2-Phenyl-2-hydroxyiminoethyl)-1-chinolinium chlorid (F-1), 1-(2-Phenyl-2-hydroxyiminoethyl)-1-isochinolium chlorid (F-2), 1-(2-Phenyl-2-hydroxyiminoethyl)-1-(4-methyl)-chinolinium chlorid (F-3) und 1-(2-Phenyl-2-hydroxyiminoethyl)-1-(6-methyl)-chinolinium chlorid (F-4) wurden durch ihre UV-Absorptionspektren in einer Reihe vonBritton-Robinson-Pufferlösungen impH-Intervall 8.74–11.28 (t=25±0.5°C; =0.2) bestimmt. Die berechnetenpK _a -Werte stimmen mit den über graphische Methoden erhaltenen Ergebnissen überein. DerpK _a -Wert beträgt 9.93 für die VerbindungF-1 und 9.90 fürF-2, sowie 10.02 fürF-3 andF-4.Auf Grund der potentiometrischen Titration wurden auch die thermodynamischen Aciditätskonstanten (pK _a ) berechnet: 9.82 fürF-1, 9.71 fürF-2, 9.91 fürF-3 und 9.86 fürF-4. Wenn man diese Konstanten in Mischaciditätskonstanten überträgt, erhält man Werte, die mit den durch spektrophotometrischen Bestimmungen erhaltenen Werten gut übereinstimmen.

     

海泡石制备HMS和AlSBA介孔分子筛的研究

通过酸浸和模板合成处理，海泡石直接合成有序介孔二氧化硅和含铝的介孔二氧化硅. 海泡石用盐酸处理后120 ℃下在NaOH溶液中处理72 h, 得到具有HMS结构特征的介孔分子筛；在含铝的碱性溶液中处理后得到具有AlSBA结构的介孔分子筛. 并用SAXRD、BET、TPD表征了介孔分子筛的物相结构、比表面积、孔径分布和表面酸性. 两种介孔分子筛的比表面积分别为508 m2•g^-1和946 m2•g^-1，孔径分别为3.4 nm和3.9 nm，且孔径分布窄. NH3-TPD结果表明分子筛表面都有两个酸中心，随着Al原子的引入，表面酸性增强.     

Selective extraction of U(VI) over Th(IV) from acidic streams using di-bis(2-ethylhexyl) malonamide anchored chloromethylated polymeric matrix

A new chelating polymeric sorbent has been developed using Merrifield chloromethylated resin anchored with di-bis (2-ethylhexyl) malonamide (DB2EHM). The modified resin was characterized by CPMAS NMR spectroscopy, FT-NIR-FIR spectroscopy, CHN elemental analysis and also by thermo gravimetric analysis. The fabricated sorbent showed superior binding affinity for U(VI) over Th(IV) and other diverse ions, even under high acidities. Various physio-chemical parameters, like solution acidity, phase exchange kinetics, metal sorption capacity, electrolyte tolerance studies, etc., influencing the resin’s metal extractive behavior were studied by both static and dynamic method. Batch extraction studies performed over a wide range of solution acidity (0.01-10 M) revealed that selective extraction of U(VI) could be achieved even up to 4 M acidity with distribution ratios (D) in the order of ∼10³. The phase exchange kinetics studies performed for U(VI) and Th(IV) revealed that time duration of <15 min was sufficient for >99.5% extraction. But similar studies when preformed for trivalent lanthanides gave very low D values (<50), with the extraction time extending up to 60 min. The metal sorption studies performed for U(VI) and Th(IV) at 5 M HNO₃ was found to be 62.5 and 38.2 mg g⁻¹,respectively. Extraction efficiency in the presence of inferring electrolyte species and inorganic cations were also examined. Metal ion desorption was effective using 10-15 mL of 1 M (NH₄)₂CO₃ or 0.5 M α-hydroxy isobutyric acid (HIBA). Extraction studies performed on a chromatographic column at 5 M acidity were found to give enrichment factor values of 310 and 250 for U(VI) and Th(IV), respectively. The practical utility of the fabricated chelating sorbent and its efficiency to extract actinides from acidic waste streams was tested using a synthetic nuclear spent fuel solution. The R.S.D. values obtained on triplicate measurements (n = 3) were within 5.2%.     

Simultaneous determination of acidic,basic and alcoholic substances relating to monoamine hormones and metabolites in biological material by mass fragmentography (GC/MF)

A method is described for the simultaneous quantitative determination of monoamines and related compounds from urine and brain tissue samples in the pg-range, using a GC/MF instrument LKB-2091 provided with a multiple ion detection (MID) system and capillary columns. The simultaneous detection of “fingerprints” with fourteen and more compounds during one single GC run was achieved after the intoduction of “time gates” for the detection of the different characteristic masses. Several modifications to the LKB equipment permitted exact reproducibility of retention times, which is essential for the use of “time gates”. The detection of “fingerprints” with these acidic, basic and alcoholic substances was achieved by the extraction of the dried biological samples with silylating agents.     

Derivatisation in gas chromatographic determination of acidic herbicides in aqueous environmental samples

This paper reviews derivatisation processes applied in chromatographic determination of acidic herbicides (with carboxyl and phenol groups), mainly in aqueous environmental samples. The discussion focuses on the basic derivatisation reactions used to convert herbicides to derivatives to make them analysable by gas chromatography, and possibly to reduce detection limits and/or increase extraction recovery from aqueous samples. The reactions are transesterification, esterification, silylation, alkylation, and extractive and pyrolytic alkylation. The reagents used to conduct the reactions are numerous. Diazomethane is a very efficient methylation reagent but explosive and toxic. Methyl iodide also ensures rapid and efficient methylation. Benzyl bromide can be used directly in water but derivatisation yield is low and reproducibility is poor. Butyl chloroformate and dimethyl sulfite can also be used for derivatisation in water, and acetic anhydride can be used for in-situ derivatisation of phenolic herbicides. For increasing selectivity of GC detection pentafluorobenzyl bromide (for ECD) and (2-cyanethyl)dimethyl(diethylamino)silane (for NPD) have been applied. Very characteristic ions are produced in mass spectra if silyl groups are introduced, e.g. by using bis(trimethylsilyl)trifluoroacetamide. Tetramethylammonium, trimethylphenylammonium, tetraalkylammonium, and trimethylsulfonium hydroxides and salts can by used for derivatisation at elevated temperature in the GC injection port. Extractive alkylation is relatively efficient if tetraalkylammonium salts with long chain alkyl groups are used.