惯性约束聚变实验中空间干涉检测与预警系统设计

针对惯性约束聚变实验中多诊断系统在有限空间同时作业引发碰撞风险的问题，设计了基于碰撞目标检测和空间距离测算方法的空间干涉检测与预警系统，分析了真空靶室特定环境下不同实现方法的适用条件和可行性。实验室条件下模拟验证结果表明，基于结构光深度图像获取方法可获得较好的碰撞距离测量精度，在靶室半径探测距离内空间测距误差不大于3cm，为靶室空间干涉检测与预警提供了一种可行的解决方案。     

基于差分反射高光谱成像的薄层TMDC材料检测技术研究

二维过渡金属硫化物(TMDC)材料因为独特的激子效应和材料学性质，在太阳电池、光催化、传感器、柔性电子器件等领域得到广泛的应用。层数对其性质有显著的调控作用，自动检测识别所需层数的样品是其从实验室走进半导体制造工业的重要技术需求。本文结合反射高光谱成像技术与图像处理算法，发展了一种二维TMDC薄层样品的显微成像自动检测技术。基于自主搭建的反射高光谱成像系统，对制备的不同层数TMDC标准样品进行了光学对比度的系统研究，阐明了层数的差分反射光谱机理，提出了可靠的层数判定方法。基于传统边缘检测技术优化设计了一套图像处理算法，实现了TMDC样品的图像检测及层数鉴定。本文方法具有普遍性、实用性，结合自动对焦的扫描控制，能够实现大规模的自动化样品检测，这也为其他表面目标的显微识别和检测提供了新的灵感和参考。     

复合电极La-Ni-B的制备及电催化偏硼酸钠的性能

为进一步提高对偏硼酸钠电催化还原的效率,采用化学镀的方法,以铜片为基体,PdCl2乙醇胶体溶液为活化剂,乙醇为化学镀溶剂,制备了稀土复合电极La-Ni-B.并采用XRD、SEM、EDS方法对催化剂进行表征分析,结果表明稀土合金以纳米颗粒的形式附着在基体表面,所得合金膜是非晶态的.通过循环伏安法研究了复合电极La-Ni-B用于电解偏硼酸钠制备硼氢化钠的可行性.以硼氢化钠实际生产量为指标,探讨了直流、脉冲两种不同供电方式、脉冲电流频率、电解时间对电解行为的影响.结果表明稀土镧对电解偏硼酸钠有催化作用,以20 mL镀液制备的复合电极,在脉冲频率阳极时间T1=1 s,阴极时间T2=1 s时,最佳电解时间为4h.复合电极在重复使用3次的情况下,硼氢化钠产量降低15;,催化剂的重复使用性能良好.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

绝对重力测量异常值的局部异常因子检测算法

自主研发绝对重力仪的测量结果中出现的离群程度不同的异常值会直接影响测量结果的准确度和测量精度。目前一般采用的一元正态分布异常值检测算法漏检率高,容易造成测量结果的偏差和测量精度的下降。利用人工智能算法中的局部异常因子异常值检测算法,可以在线、快速、高效地完成自主研发绝对重力测量数据的异常值检测。首先,根据实测数据构建测试数据集,利用数值模拟确定局部异常因子算法邻域宽度参数的取值;然后,基于实测数据进行异常值检测并进行结果评估。评估结果表明,局部异常因子异常值检测算法对离群程度不同、连续出现异常值等情况检测效果明显优于一元正态分布异常值检测算法,组测量精度平均提高9.37μGal,可以作为自主研发绝对重力仪异常值检测的通用算法完成组测量结果的异常值检测。     

基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上，采用电化学发光（ECL）和电化学阻抗（EIS）2种技术，协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明，DNA链中心位点的C-A单碱基错配稳定性低于链两端的，靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的，同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。