排序方式: 共有61条查询结果,搜索用时 31 毫秒
1.
石榴石固体电解质由于其高的离子电导率,对锂金属稳定等优点成为了下一代高性能锂电池的重要研究方向之一。但锂金属负极界面浸润性与锂枝晶问题限制了其应用。本文通过简单的液相沉积结合高温烧结的方法,在石榴石固体电解质片表面构建了一层稳定的硼酸三锂(Li3BO3)修饰层。研究表明,Li3BO3修饰层可以有效改善石榴石固体电解质与锂金属负极界面接触,促进锂的均匀沉积/溶出,从而抑制锂枝晶生长,提高界面稳定性。Li3BO3修饰后石榴石电解质片与锂金属之间紧密结合,Li/石榴石界面阻抗由修饰前的1780 Ω·cm2降低至58 Ω·cm2。得益于界面接触的改善,Li3BO3修饰后的LLZTO电解质组装的对称电池可以在0.1 m·cm-2的电流密度下稳定工作超过700 h。而未修饰的对称电池在0.05 mA·cm-2的电流密度下短时间工作即出现微短路现象。 相似文献
2.
3.
The development of the global economy has been accompanied by frequent oil spills caused by accidental leaks and industrial manufacturing, which have seriously threatened the aquatic environment and human health. Traditional methods for the treatment of oily wastewater include centrifugation, skimming, flotation, oil-absorbing technology, etc., which are limited by low separation efficiency as well as secondary pollution during the post-processing of oil absorption materials. Recently, separation technologies utilizing the special wettabilities of filtration membranes have been developed to enrich and recycle oils from wastewater. Among these, the fabrication of superhydrophilic/underwater superhydrophobic membranes have attracted intensive research interest, which can selectively allow the passage of water through the membrane while blocking the oils. However, microorganisms are more likely to breed on these hydrophilic surfaces, eventually leading to the blockage of the membranes. In this study, ZSM-5 zeolite crystals (MFI topological structure) were coated onto the stainless-steel meshes by means of seeding and secondary hydrothermal growth. Then, 70% of the total Na+ ions in the zeolite channels were substituted by Ag+ ions via an ion exchange process. The resultant membranes (Ag@ZCMFs) were superamphiphilic in air, with both water contact angle and oil contact angle of approximately 0°. However, they became superoleophobic when immersed in water, and the underwater oil contact angle reached 151.27° ± 4.34°. In terms of special wettability, Ag@ZCMF achieved efficient separation for various oil-water mixtures with separation efficiencies above 99%. The water flux and intrusion pressure of Ag@ZCMF depended on the diameter of pinholes in the membrane, which could be modulated by altering the time of secondary hydrothermal growth. For instance, the average diameter of pinholes in Ag@ZCMF with optimum secondary growth time of 14 h (Ag@ZCMF-14) reached approximately 21 μm, giving rise to the water flux and intrusion pressure of 54720 L·m-2·h-1 and 4357 Pa, respectively. The anti-corrosion test and rubbing test confirmed the high chemical and mechanical stability of Ag@ZCMF-14, respectively. The separation efficiency of Ag@ZCMF-14 remained stable during ten purification-regeneration cycles, and no obvious attenuation was observed, proving the high separation stability of Ag@ZCMF-14. Furthermore, the loaded Ag+ ions afforded the membrane excellent anti-biofouling activity, which could effectively inhibit the growth of both alga and bacteria in the operating environment, thus preventing membrane blockage during the oil-water separation process. In particular, the bacteriostatic rate of Ag@ZCMF-14 to Escherichia coli reached to 99.6%. These results demonstrate that Ag@ZCMFs with anti-biofouling activity has promising potential future applications in the removal of oil slicks from oily wastewater. 相似文献
4.
通过简单浸泡的方法在铜基底上制备出了具有微纳米复合结构的氧化铜,再利用混合硫醇溶液[含HS(CH2)9CH3和 HS(CH2)11OH]对浸泡后的表面进行修饰,通过控制溶液中HS(CH2)11OH的浓度,制备出一系列具有不同浸润性的铜表面,实现表面从超疏水到超亲水的有效调控. 研究发现,表面浸润的可控性源于表面复合结构与不同化学组成的协同作用,微纳米复合结构的存在为表面浸润性的调节提供了必要的条件. 相似文献
5.
6.
7.
8.
近年来,偶氮苯类化合物的光学顺反异构现象已引起人们的广泛关注[1~7].在紫外光照射下,偶氮苯由反式结构转变为顺式结构,引起分子的偶极矩发生变化,导致分子的吸收光谱、尺寸及表面能等均发生变化[7].偶氮苯表面能的改变可引起其表面浸润性发生变化.据文献[1~4]报道,偶氮苯膜在紫外光照射前后接触角最大改变了11°.浸润性是固体表面的一个重要特性,主要受固体表面的化学组成和微观几何结构(粗糙度)影响[8~11].通常,与水的接触角大于150°的表面称为超疏水表面;而与水的接触角小于5°的表面称为超亲水表面.本文以2-(4-偶氮苯基苯氧基)丙烯酸… 相似文献
9.
利用脉冲激光在Si表面刻蚀具有不同宽度和深度的微槽形貌, 通过测量接触角的大小研究其浸润特性, 并分析了形貌与浸润性的关系. 结果表明, 在Si表面刻蚀微槽深度一定的条件下, 刻蚀微槽宽度越宽, 接触角越小; 在Si表面刻蚀微槽宽度一定的条件下, 刻蚀微槽越深, 接触角越大, 最高可达165°. 而且Si表面上刻蚀后产生的细微尖峰结构对其浸润特性有显著的影响. 因此, 利用激光刻蚀表面方法可以在一定程度上调控固体表面的润湿性能. 相似文献
10.
纳米通道内表面浸润性对气泡的作用 总被引:2,自引:0,他引:2
运用分子动力学模拟方法研究了在质量力驱动下不同浸润性壁面纳米通道中气泡的分布及其运动状况, 提出了一种统计纳米通道中气泡运动速度的方法. 结果显示, 在亲水性壁面的纳米通道中, 气泡位于通道中间, 气泡的运动速度接近但小于通道中心流速, 在势能强度较大时, 壁面吸附的分子较多, 气泡也较大, 反之则气泡较小; 对超疏水性壁面, 气泡则位于固壁附近, 两个壁面形成对称的一对气泡, 气泡的运动速度接近但大于边缘速度. 流体总的流动速度随着流体粒子与壁面粒子作用的减弱而增大, 滑移速度则逐渐从负转变为正. 相似文献