爆炸加载下混凝土表面的裂纹扩展

为深入研究内爆加载下岩土类材料的破坏机理，提出了一种新的爆炸裂纹检测算法，采用数字图像相关方法测量表面位移场和应变场，建立了裂纹扩展和扩张模型，并通过混凝土内爆试验观测裂纹扩展过程，研究了裂纹长度扩展与宽度扩张规律。结果表明，裂纹长度扩展是应力波和爆生气体共同作用的结果，裂纹最大扩展速度为225.95 m/s，平均速度为122.27 m/s，裂纹总长159.92 mm，长度扩展止于1.75 ms；裂纹的张开由气体主导，最大宽度1.59 mm，作用时间长达4.5 ms；拉应变集中区先于裂纹出现，其形状决定了裂纹的走向和趋势，爆炸加载下断裂过程区长度为骨料粒径的8～9倍。     

高浓铀金属临界装置缓发中子有效份额测量

缓发中子有效份额βeff是反应堆动态特性的重要参数,也是相对反应性与绝对反应性之间的转换桥梁,对于以反应性作为宏观参数的检验工作具有重要意义。测量采用基于Rossi-α方法的Nelson数法开展了快临界装置βeff的实验研究。通过采用铅屏蔽、更薄的6Li玻璃闪烁体、脉冲幅度甄别三种措施,降低了γ射线对测量的影响。实验中测量了反应堆从-60￠到缓发临界之间的7个状态,最终测量得到βeff值为0.006 66,不确定度为7.88%;与理论计算数值偏差为2.15%。测量结果与理论值符合良好,表明了测量方法的有效性。     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

The acoustic characteristics of clause, sentence and paragraph boundaries in Chinese Putonghua

The acoustic and perceptive characteristics of discourse units, including clauses, simple sentences, compound sentences and paragraphs, were studied. The acoustic characteristics were based on the analysis of a speech corpus consisted of ten monologues. The Perceived Boundary Strength (PBS) of the monologues was labeled on a five-point scale by 25 participants. The main results are as follows: (1) There is a significant difference in the PBS of clauses (corresponding to intonational phrase), sentences (including simple sentences and compound sentences) and paragraphs. But the PBS of simple sentences and compound sentences is the same, and the pitch reset and pause are also not significantly different between these two kinds of boundaries. (2) The pitch-based cue used to distinguish clauses, sentences and paragraphs appears to be the difference between pre- and post-boundary syllables, but not simply the pitch value of either syllable alone. (3) Declination mainly occurs within intonational phrases, whereas there is no consistent global declination in sentences or in paragraphs. (4) Pauses are longer and more varied at the boundary of larger discourse units. Moreover, there is a significant positive correlation between pause duration and degree of pitch reset at clause boundaries, but not at sentence or paragraph boundaries.     

合肥光源高亮度模式Lattice设计

介绍了一组合肥光源新高亮度模式的Lattice. 新的设计维持了储存环上所有元件和光束线位置不变,也没有加入新的元件. 取得了较低发射度. 所有直线节处的垂直方向β函数值都很小，适合插入件的运行. 跟踪计算表明新Lattice具有足够大的动力学孔径用于注入和储存粒子.     

低维材料的热导率

一根导热棒 ,如果在它的两端存在温差 ,便会有热量从高温端流向低温端 .这种能量在固体中的传输 ,不是沿着棒按照直线路径完成的 ;其间 ,导热声子将遭遇到频繁的碰撞 ,从而产生热阻 .表征材料导热性能的物理量是热导率κ[单位是W /(m·K) ],而传输的热流密度 jQ(W /m2 )与温度梯度成正比 ,即 jQ=-κdT/dX .如果声子在传输过程中不经历散射 ,则不论导热棒多长 ,jQ 将不依赖于温度梯度 ,而仅仅取决于两端的温差 .引入声子平均自由程l ,经典理论给出 ,κ =(1/3)Cvl,其中C是单位体积材料的热容 ,v是声子的平均速度 .在低温下 ,对于无杂质缺…     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

EPT／BIIR橡胶密封材料制备及其性能

为了探索具备低水蒸气透过系数、低透气系数、低压缩永久变形以及良好耐老化性能的新型橡胶密封材料，鉴于影响并用胶性能的主要因素是共混相容性以及硫化速度，从实现并用胶优势互补角度出发，优选综合性能较好的三元乙丙橡胶（EPT）和溴化丁基橡胶（BIIR），开展了EPT／BIIR共混共硫化技术研究，并开展了DBPMH／HVA-2过氧化物硫化体系在EPT／BIIR并用胶中的应用研究。     

类铍离子低激发态等电子系列的能量、精细结构和超精细结构

采用多组态相互作用方法及Rayleigh-Ritz 变分方法，并考虑相对论修正和质量极化效应，获得了类铍离子等电子系列（Z=4-10）低激发态1s²2p2p ¹D^e和1s²2p3p ³P^e的相对论能量。同时还计算了精细结构和超精细结构。计算结果与其他理论和实验符合的很好。     

覆盖亚临界到临界区的制冷工质物性快速算法

为了在亚临界到临界点这个大范围内保证制冷剂物性计算的快速、稳定、可逆,提出将整个数据区间划分成若干个子区间分别进行隐式拟合,并且保证相邻子区间连接点处的连续与光滑,以及通过求分析解从隐式方程中得到显式物性计算式的方法.以美国国家标准局开发的程序REFPROP6.01的计算结果作为数据源,以R410A为例对该方法做了验证.得出快速物性计算公式的应用范围为饱和温度-60℃至临界温度,与NIST REFPROP 6.01的计算结果进行比较表明,计算速度快1500倍,平均相对偏差小于0.01%.