Ferroelectric phase transitions in Pb2xSn2(1-x)P2Se6 system

Heat capacities of the Pb_2xSn_2(1-x)P₂Se₆ crystals (x=0, 0.098, 0.251, 0.402 and 1.0) were measured using an adiabatic calorimeter at temperatures between 10 and 350 K. In the crystal of x=0, two heat capacity anomalies corresponding to the ferroelectric commensurate - intermediate incommensurate(C-IC) phase transition temperature T _i, and the incommensurate - paraelectric (IC-N) phase transition temperature T _c, were observed at 193.24±0.10 and 220.07±0.15 K, respectively. The phase transition temperatures decreased with an increase in Pb²⁺ concentration. The anomaly at Ti disappeared at x=0.251 in the mixed systems of the Pb_2xSn_2(1-x)P₂Se₆. In the crystal of Pb₂P₂Se₆ (x=1.0), no phase transition was observed. The normal heat capacities for the mixed crystals were determined by least squares fitting of the Debye and Einstein functions to the experimental data. The anomalous heat capacities gave the phase transition entropies of 8.5 and 1.5 J mol^-1 K^-1 for x=0. The large transition entropies are consistent with an order-disorder mechanism in the ferroelectric-paraelectric phase transitions in x=0. This revised version was published online in August 2006 with corrections to the Cover Date.     

Emergence of the sub‐THz central peak at phase transitions in artificial BaTiO3/(Ba,Sr)TiO3 superlattices

A prominent central peak in the sub‐THz frequency range was observed in the Raman spectra of BaTiO₃/(Ba,Sr)TiO₃ (BT/BST) superlattice grown on (001)MgO substrate. Both soft and central mode show an anomaly around 200 K and 280 K, which can be correlated with orthorhombic to monoclinic phase transition of BST and BT, respectively. The observed temperature dependence of the central mode enabled us to explain rather broad temperature dependence of the dielectric permittivity previously observed in BT/BST superlattices. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

A Molecular Thermochromic Ferroelectric

Molecular ferroelectrics have attracted considerable interests because of their easy and environmentally friendly processing, low acoustical impedance and mechanical flexibility. Herein, a molecular thermochromic ferroelectric, N,N′‐dimethyl‐1,4‐diazoniabicyclo[2.2.2]octonium tetrachlorocuprate(II) ([DMe‐DABCO]CuCl₄) is reported, which shows both excellent ferroelectricity and intriguing thermochromism. [DMe‐DABCO]CuCl₄ undergoes a ferroelectric phase transition from Pca2₁ to Pbcm at a significantly high Curie temperature of 413 K, accompanied by a color change from yellow to red that is due to the remarkable deformation of [CuCl₄]^2? tetrahedron, where the ferroelectric and paraelectric phases correspond to yellow and red, respectively. Combined with multiple bistable physical properties, [DMe‐DABCO]CuCl₄ would be a promising candidate for next‐generation smart devices, and should inspire further exploration of multifunctional molecular ferroelectrics.     

High‐Tc Enantiomeric Ferroelectrics Based on Homochiral Dabco‐derivatives (Dabco=1,4‐Diazabicyclo[2.2.2]octane)

1,4‐Diazabicyclo[2.2.2]octane (dabco) and its derivatives have been extensively utilized as building units of excellent molecular ferroelectrics for decades. However, the homochiral dabco‐based ferroelectric remains a blank. Herein, by adding a methyl (Me) group accompanied by the introduction of homochirality to the [H₂dabco]²⁺ in the non‐ferroelectric [H₂dabco][TFSA]₂ (TFSA=bis(trifluoromethylsulfonyl)ammonium), we successfully designed enantiomeric ferroelectrics [R and S‐2‐Me‐H₂dabco][TFSA]₂. The two enantiomers show two sequential phase transitions with transition temperature (T_c) as high as 405.8 K and 415.8 K, which is outstanding in both dabco‐based ferroelectrics and homochiral ferroelectrics. To our knowledge, [R and S‐2‐Me‐H₂dabco][TFSA]₂ are the first examples of dabco‐based homochiral ferroelectrics. This finding opens an avenue to construct dabco‐based homochiral ferroelectrics and will inspire the exploration of more eminent enantiomeric molecular ferroelectrics.     

Processing optimization: A way to improve the ionic conductivity and dielectric loss of electroactive polymers

Electro‐active polymers (EAPs) such as P(VDF‐TrFE‐CTFE) are greatly promising in the field of flexible sensors and actuators, but their low dielectric strength driven by ionic conductivity is a main concern for achieving high electrostrictive performance. It is well known that there is a quadratic dependence of the strain response and mechanical energy density on the applied electric field. This dependence highlights the importance of improving the electrical breakdown EAPs while reducing the dielectric losses. This article demonstrates that it is possible to dramatically increase the electrical breakdown and decrease the dielectric losses by controlling processing parameters of the polymer synthesis and fabrication procedure. As a result, an enhancement of around 70% is achieved in both the strain and blocking force. The effects on the dielectric losses of the polymer crystallinity, molecular weight, solvent purity, and crystallization temperature are also investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1164–1173     

Observation of mechanical fracture and corresponding domain structure changes of polycrystalline PbTiO3 nanotubes

PbTiO₃ (PTO) nanotubes (NTs) were synthesized at various temperatures by gas phase reaction between PbO gas and anatase TiO₂ NTs and characterized by piezoresponse force microscopy (PFM). PTO ferroelectric phase was synthesized at as low as 400 °C as evidenced by PFM domain images and piezoresponse hysteresis loop measurement. Furthermore, the PTO NTs fabricated at above 500 °C underwent mechanical fracture through development of nanocracks due to grain growth, leading to ferroelectric domains with larger size and lower aspect ratio. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Nanoscale retention‐loss dynamics of polycrystalline PbTiO3 nanotubes

We observed the nanoscale retention dynamics of polycrystalline PbTiO₃ nanotubes using piezoresponse force microscopy. We found that the retention loss of the nanodot domains on the nanotubes showed the stretched exponential relaxation behaviors with stretched exponential factor n being less than 1 (0.523 and 0.692), which are similar to the thin films. In addition, the nanodot domains showed a diverse relaxation time constant τ due to different remnant polarization of each dot domains. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Lead-free ferroelectric BaTiO3 doped-(Na0.5Bi0.5)TiO3 thin films processed by pulsed laser deposition technique

The difficulties in synthesizing phase pure BaTiO₃ doped-(Na_0.5Bi_0.5)TiO₃ are known. In this work, we reporting the optimized pulsed laser deposition (PLD) conditions for obtaining pure phase 0.92(Na_0.5Bi_0.5)TiO₃-0.08BaTiO₃, (BNT-BT_0.08), thin films. Dielectric, ferroelectric and piezoelectric properties of BNT-BT_0.08, thin films deposited by PLD on Pt/TiO₂/SiO₂/Si substrates are investigated in this paper. Perovskite structure of BNT-BT_0.08 thin films with random orientation of nanocrystallites has been obtained by deposition at 600 °C. The relative dielectric constant and loss tangent at 100 kHz, of BNT-BT_0.08 thin film with 530 nm thickness, were 820 and 0.13, respectively. Ferroelectric hysteresis measurements indicated a remnant polarization value of 22 μC/cm² and a coercive field of 120 kV/cm. The piezoresponse force microscopy (PFM) data showed that most of the grains seem to be constituted of single ferroelectric domain. The as-deposited BNT-BT_0.08 thin film is ferroelectric at the nanoscale level and piezoelectric.     

BaTiO3铁电体中辐射位移效应的分子动力学模拟

运用基于壳模型的分子动力学方法研究了BaTiO₃铁电体中的辐射位移效应.采用O原子作为初级击出原子,模拟了当初级击出原子能量为1 keV时体系内缺陷的产生和演化.模拟结果表明,当入射方向为[001]时,体系内产生的缺陷最多.在所有缺陷中,以O缺陷的含量为最高,达80%以上.同时,这些缺陷的产生并不显著改变体系的自发极化强度,对体系的极化翻转过程也基本没有影响.在外电场作用下,观察到了显著的缺陷迁移. 关键词： 分子动力学 3铁电体')" href="#">BaTiO₃铁电体 辐射位移效应