高纯氧化钆中14种稀土杂质元素的柱色谱分离ICP-AES法测定

用Ｐ５０７萃淋树脂柱色谱法分离高纯氧化钆基体与稀土杂质。用ＩＣＰ－ＡＥＳ法测定高纯氧化钆中微量稀土杂质。选择了柱色谱分离的合适条件。优化了仪器测定参数。使本方法测定稀土总量下限小于１×１０－５％。可以满足９９．９９９９％高纯氧化钆的测定。此方法回收率在８５％－１１０％之间。相对标准偏差小于１８％。     

互贯型螯合树脂的研究．Ⅱ．IPN型含偕胺肟基螯合树脂的合成与性能研究

以交联聚苯乙烯－聚丙烯腈树脂为骨架，经功能基化反应制备出含偕胺肟基团的互贯型螯合树脂。对功能基化反应条件和螯合树脂对金的吸着性能，吸着选择性和吸着机理进行了研究。互贯型螯合树脂的吸着性能与互贯树脂的结构有关，而螯合树脂的选择吸着性则与互贯网络无关．     

树脂对茶多酚与咖啡因的吸附分离

从低档绿茶末的水提取液中，利用离子交换，吸附树脂成功地分离出茶多酚与咖啡因，并详细考察了其交换与吸附性能。与其它方法相比，该树脂法具有产品收率高，成本低廉等特点。     

氢化物发生-原子荧光光谱法测定中草药中的微量铅

采用水煎煮法提取中草药,HNO3-H2O2密闭消解体系消解样品,应用氢化物发生-原子荧光光谱法测定中草药及其提取液中的微量铅;优化了仪器工作及实验条件,荧光强度与Pb质量浓度在0.49～400 μg/L范围内呈线性关系,相关系数:0.9996,检出限:0.49 μg/L;发现部分提取液中Pb量比原中草药样品中Pb量有明显降低.     

氧化还原树脂的合成及其氧化还原性能

本文主要叙述了以国产717强碱性阴离子交换树脂为基体,采用甲醛与对苯二酚、邻苯二酚、连苯三酚和2,7-萘二酚等聚合生成氧化还原树脂,它们的氧化还原容量分别为5.3,5.4和5.2meq/g-干树脂.文中还介绍了本类树脂的氧化还原电位测定方法,并据此研究和测定了对苯二酚、邻苯二酚和连苯三酚型树脂的氧化还原电位,这些电位的测定结果与其氧化还原实验事实相符.也研究了多种氧化剂和还原剂与自制树脂的交换性能,讨论了这些树脂容量与交换性能的关系.应用所合成的新树脂进行了从硝酸银废液中回收银和对硫化氢试行氧化脱硫处理试验,效果良好.     

The impact of polystyrene resins in solid-phase organic synthesis

Summary A major objective of the DIVERSOMER^® technology is to provide pure and characterized compounds for biological testing in order to prevent false negatives in our libraries. On several occasions, analysis of the final products by¹H-NMR and MS, has revealed by-products from the polystyrene solid support. Subsequently, three alternative methods were studied to remove polystyrene by-products; (i) prewashing of the resin prior to execution of the synthesis; (ii) pretreatment of the resin with the cleavage conditions consistent with the solid-phase synthesis reaction scheme; and (iii) parallel purification.     

测定水性聚氨酯树脂平均相对分子质量及其分布的高效凝胶渗透色谱法

选用HP PL gel MIXED-B柱双柱串联，四氢呋喃作流动相，紫外吸收检测器测定了水性聚氨酯树脂的平均相对分子质量及其分布；通过一系列的条件试验，确定了最佳的凝胶色谱（GPC）条件，结果令人满意；该研究有助于了解水性聚氨酯树脂性能，有效地指导工艺生产和基础研究。     

Selective separation of gold from iron ore samples using ion exchange resin

Gold in iron ore samples is separated from iron (major matrix cation), antimony and vanadium using anion exchange resin in (0.2 M) HBr, potassium peroxodisulfate and acetone:water:nitric acid media. The exchangeable anion Cl⁻ of the ion exchanger Dowex 1X 4 is replaced by Br⁻ using (6 M) HBr solution. Certified reference material DGP-M1, spiked ferric magnetic oxide, gold radioactive tracer ¹⁹⁸Au and gold standard solutions are used to study the adsorption efficiency and the yield recovery of tetrabromoaurate AuBr₄⁻ from the resin. Ten eluents have been tried to elute gold from the column, and it has been found that a 10 ml potassium peroxodisulfate and 240 ml acetone:water:nitric acid [125:5:5] solution fulfills the objective. The set up of the separation procedure allows quantitative adsorption of gold by the resin, while the major matrix cation (Fe) and others (Cd, Ag, Cu, V, Sb, Ti) have been passed through the column with the feeding solution (0.2 M) HBr. The resin selectivity coefficient (K) of separating Au from Fe has been found to be K_Fe^Au≈6.4×10¹¹. The eluted Au is treated with K₂S₂O₈ and H₂O₂ for spectrophotometric determination as rhodamine-B complex at 555.6 nm. The linearity, detection limit, precision, and accuracy of the determination method have been found to be up to 2.0 μg g⁻¹, 0.018 μg g⁻¹, 0.009 μg g⁻¹ and 3%, respectively.     

REATMENT AND RESOURCE REUSE OF 1,2,4-ACID PRODUCING EFFLUENT WITH MACROPOROUS POLYMERIC ADSORBENT

1. INTRODUCTION 1,2,4-acid (1-Amino-2-naphthol-4-sulfonic acid) is among the most important naphthalene derivatives which are widely used as the intermediates of dyestuffs. In its production process, however, high strength wastewater streams are gene…     

The “Fingerprint” of a freshwater microalga Scenedesmus sp. LX1: Visualizing the composition of its soluble algal products

The composition of soluble algal products was visualized by a fingerprint analytical method.