Decreasing the Displacements of a Composite Saddle-Shaped Cable Roof

The structural possibilities of decreasing the compliance of a composite saddle-shaped cable roof having a compliant support contour are investigated. The use of a supporting contour consisting of cables joined together with tie-bars is considered as a structural method enabling one to decrease the compliance of the roof. Each cable of the support has its own initial flexure. The method is most efficient from the viewpoint of material consumption per unit of covered area relative to the increasing rigidity and prestress level of the cable net.The efficiency of the method was evaluated by a numerical experiment, which was carried out for a composite saddle-shaped cable roof 50 × 50 m in the plan. The roof was formed by two orthogonal cable groups joined with a compliant supporting contour. A hybrid composite cable based on a carbon-fiber-reinforced plastic, a glass-fiber-reinforced plastic, and steel was considered as a material for the cable net in combination with steel. The material consumption and the maximum vertical displacement of the cable net in relation to the initial geometrical characteristics of the supporting contour were obtained. A possibility of decreasing the maximum vertical displacements of the roof by 8% was established.     

MO analysis of macroscopic supercurrent flow in MgB 2

We present results from an extended magneto-optical (MO) analysis of two samples cut from high-density pellets of MgB₂. The first sample was studied in order to show that no matter how large the sample is and despite the bulk granularity, the material enters into a critical state in a crystal-like fashion. The second sample was chosen for the quantitative analysis. A numerical approach based on an inverted 2D Biot-Savart model was used to calculate the current paths across the homogeneous polycrystalline bulk, as well as in the vicinity and across some morphological defects. Local current densities in the homogeneous part were estimated as a function of the applied magnetic field at different temperatures, in three regimes: below full penetration, at full penetration and above full penetration, respectively. A hypothesis of interpretation of the apparent absence of magnetic granularity inside the polycrystalline microstructure is presented. It is related to a critical state likely reached by a network of strongly coupled Josephson junctions. Received 31 May 2001 and Received in final form 5 December 2001     

Measurement of the Distribution of Magnetic Field in Gyrotron of ECRH System on HL-2A Tokamak

In ECRH system of HL-2A tokamak, we chose a new type of gyrotron imported from Russia. We finished the installation and testing last year with the help of Russian experts. We got a lot of useful data and satisfying results after our experiments with the operating of gyrotron.     

Generation of 3rd and 5th harmonics in a thin superconducting film by temperature oscillations and isothermal nonlinear current response

The generation of harmonics of the voltage response is considered when an AC current is applied through a superconducting film above T_c. It is shown that almost at all temperatures the mechanism of the temperature oscillations created by the AC current and the temperature dependence of the resistance dominates over the isothermal nonlinear electric conductivity. Only in a narrow critical region close to T_c the latter is essential for the generation of the harmonics. A detailed investigation of harmonics generation provides an accurate method for measuring the thermal boundary conductance between the film and the insulating substrate. The critical behaviour of the third harmonic will give a new method for the determination of the lifetime of metastable Cooper pairs above T_c. The comparison of the calculated fifth harmonics of the voltage with the experiment is proposed as an important test for the applicability of the employed theoretical models. Received 8 September 2001     

Growth and magnetic characterization of YBCO films

Summary Epitaxial films of YBa₂Cu₃O_7−x were depositedin situ on LaAlO₃ substrates using single-target 90° off-axis sputtering. The films were characterized by magnetization measurements (M vs. T, H), applying the field parallel toc-axis. The observed differences in theT _c andJ _c values are attributed to the different oxygen content in the superconducting films. Paper presented at the ?VII Congresso SATT?, Torino, 4–7 October 1994.     

Magnetic calorimeter for registration of small energy release

A scheme of magnetic calorimeter for registration of rare events characterized by small energy release (cosmic rays, WIMPs, solitary X-ray quanta) is proposed. The calorimeter is brought to operation by adiabatic demagnetization, and its magnetic response is measured by a quantum interferometer (SQUID, A. Barone and G. Paterno, Physics and applications of Josephson Effect). Special consideration is given to the specific features of calorimeter operation in the ferromagnetic transition region. The trigger registration of ultrasmall energy release by a ferromagnetic system in the metastable state is described.     

北京大学DC-SC光阴极注入器的升级设计

 基于直流电子枪-超导加速腔（DC-SC）光阴极注入器样机的初步实验结果，北京大学提出了新的注入器的改进设计。新注入器核心结构包括皮尔斯枪和3+1/2超导腔。文章给出了它们的详细结构参数，然后采用程序，对注入器的束流动力学进行了模拟。结果发现：新注入器可以提供具有高束流品质、高平均流强的电子束，束团的电荷量100 pC，横向发射度低于2 mm·mrad,脉宽5 ps,rms束斑可达0.5 mm，重复频率81.25 MHz；也可以提供电荷量为300 pC低重复频率的高峰值流强的电子束，其横向发射度小于3 mm·mrad,脉宽约为9 ps，以满足北京大学自由电子激光（PKU-FEL）实验平台的要求。     

High-T c superconducting magnetic bearings for rotation-based devices

Summary A Modified-Melt-Powder-Melt-Growth (MMPMG) technique has been developed for the preparation of melt-textured Y-Ba−Cu−O pellets. To test their performances, the samples were characterized with respect to their microstructure, pinning strength and interaction force with permanent magnets. A superconducting magnetic bearing was built and integrated in a levitating flywheel system for energy storage. Paper presented at the “VII Congresso SATT?, Torino, 4–7 October 1994. Under a Fondazione Confalonieri grant.     

Transient vibrations of a tau inclined cable with a riding accelerating mass

The objective of this paper is a theoretical and numerical study of the dynamics of a taut inclined cable with a riding accolerating mass, which is suspended from two points of different elevation. The moving mass is a trolley that is accelerated by a solid fuel rocket down the inclined cable and is aerodynamically brought to a halt. The thrust of the rocket is tangential to the deformed configuration of the cable.Methods of analysis consist of the dynamics of small deformations superimposed on the static catenary state. The problem is nonlinear due to presence of friction and the convective acceleration interaction of the moving mass and the cable. Galerkin's procedure for removal of spatial dependence and numerical integration are used to obtain convergent solutions.Deceased     

Alternating-current losses in two-layer superconducting cables consisting of second-generation superconductors coated by U-shaped ferromagnetic materials

Alternating-current losses in a two-layer superconducting cable, each layer being composed of 15 closely-spaced rectangular wires made up of second-generation superconductors when the ends of wires are coated by either a non-magnetic or strong ferromagnetic material having a U profile is numerically investigated. Computations are carried out through the finite-element method. The alternating-current losses do not increase significantly if the relative permeability of the coating is increased three orders of magnitude, provided that the current amplitude is less than half of the critical current in a superconducting wire. However, the losses are much higher for ferromagnetic coating if the amplitude of the applied current oscillating at 50 Hz is close to the critical current. The ferromagnetic coating is seen to accumulate the magnetic field lines normally on its surfaces, while the field lines are parallel to the long axes of the wires, leading to more significant flux penetration in the coated regions. This facilitates a uniform low-loss current flow in the uncoated regions of the wires. In contrast, coating with a non-magnetic material gives rise to a considerably smaller current flow in the uncoated regions, whereas the low-loss flow is maintained in the coated regions. Moreover, the current flows in opposite directions in the coated and uncoated regions, where the direction in each region is converse for the two materials.