Material tensor parameters of LiNbO3 relevant for electro- and elasto-optics

The complete set of self-consistent parameters of nominally undoped LiNbO₃ crystals of congruent composition that describe the electro-optic, piezoelectric, elasto-optic, elastic, and dielectric response has been determined by numerically evaluating available measurements. The parameters were determined at room temperature and consist of the low-frequency clamped dielectric constants ε^S _ij, elastic stiffness constants at constant electric field C^E _ijkl, piezoelectric stress coefficients e_ijk, elasto-optic constants at constant electric field p^E _ijkl, and clamped electro-optic coefficients r^S _ijk. It is shown that the complete set is required for calculating the effective electro-optic coefficients and dielectric constants in photorefractive applications of LiNbO₃. Received: 4 January 2002 / Revised version: 1 February 2002 / Published online: 14 March 2002     

Search for deconfinement in NA49 at the CERN SPS

Experiment NA49 at the CERN SPS uses a large acceptance detector for a systematic study of particle yields and correlations in nucleus-nucleus, nucleon-nucleus and nucleon-nucleon collisions. Preliminary results for Pb+Pb collisions at 40, 80 and 158 A⋅GeV beam energy shown and compared to measurements at lower and higher energies.     

Quark confinement in 2+1 dimensional pure Yang-Mills theory

We report some progress on the quark confinement problem in 2 + 1 dim. pure Yang-Mills theory, using Euclidean instanton methods. The instantons are regularized Wu-Yang ‘monopoles’, whose long range Coulomb field is screened by collective effects. Such configurations are stable to small perturbations unlike the case of singular, undressed monopoles. Using exact non-perturbative results for the 3-dim. Coulomb gas, where Debye screening holds for arbitrarily low temperatures, we show in a self-consistent way that a mass gap is dynamically generated in the gauge theory. The mass gap also determines the size of the monopoles. We also identify the disorder operator of the model in terms of the Sine-Gordon field of the Coulomb gas and hence obtain a dual representation whose symmetry is the centre ofSU(2).     

Surface structure of quark stars with magnetic fields

We investigate the impact of magnetic fields on the electron distribution of the electrosphere of quark stars. For moderately strong magnetic fields of B ∼ 10¹³ G, quantization effects are generally weak due to the large number density of electrons at surface, but can nevertheless affect the photon emission properties of quark stars. We outline the main observational characteristics of quark stars as determined by their surface emission, and briefly discuss their formation in explosive events termed as quark-novae, which may be connected to the r-process.     

Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

The primary investigation of optical-limiting effects of optical active phthalocyanine derivative TMBO-SiPc

The optical-limiting property of an optically active phthalocyanine derivative with different configuration in chloroform solution was measured at 532 nm with 10 ns pulses. The excited state absorption cross-section σ_ex of the derivative was determined with the Z-scan technique. The results showed that the phthalocyanine derivative possesses larger σ_ex than the ground state absorption cross-section σ₀, indicating that it is a material for reverse saturable absorption. And it is specially noticed that the change in the optically active configuration affects its optical-limiting property significantly.     

F－L模型的状态方程与退禁闭相变图象

用温度场论方法计算了Ｆ－Ｌ模型在有限温度和密度下的状态方程，分析了压强对净重子数密度的等温线．结果表明，在平均场近似下，Ｆ－Ｌ模型所给出的退禁闭相变为一级相变．     

The second hyperpolarizability of CdTe nanocrystals using polarization-resolved degenerate four-wave mixing

Polarization-resolved forward degenerate four-wave mixing (DFWM) in a nonresonant region revealed the effective third-order nonlinear susceptibility of colloidal CdTe nanocrystals (NCs) with the size near the Bohr radius and various concentrations. The second hyperpolarizabilities, and , of the CdTe NCs were ∼1.15 × 10⁻⁴¹ m⁵/V² and ∼3.01 × 10⁻⁴² m⁵/V² from the measurement of the concentration-dependent third-order nonlinear susceptibility of CdTe NCs, respectively. The ratio (/) of the hyperpolarizabilities was ∼0.26, which indicated a large contribution of an electronic polarization process to the third-order nonlinearity of CdTe NCs.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

Properties of baryonic,electric and strangeness chemical potentials and some of their consequences in relativistic heavy ion collisions

Analytic expressions are given for the baryonic, electric and strangeness chemical potentials which explicitly show the importance of various terms. Simple scaling relations connecting these chemical potentials are found. Applications to particle ratios and to fluctuations and related thermal properties such as the isothermal compressibility κT${\kappa }_T$ are illustrated. A possible divergence of κT${\kappa }_T$ is discussed.