Nickel/Photoredox-Catalyzed Asymmetric Reductive Cross-Coupling of Racemic α-Chloro Esters with Aryl Iodides

A unique nickel/organic photoredox co-catalyzed asymmetric reductive cross-coupling between α-chloro esters and aryl iodides is developed. This cross-electrophile coupling reaction employs an organic reductant (Hantzsch ester), whereas most reductive cross-coupling reactions use stoichiometric metals. A diverse array of valuable α-aryl esters is formed under these conditions with high enantioselectivities (up to 94 %) and good yields (up to 88 %). α-Aryl esters represent an important family of nonsteroidal anti-inflammatory drugs. This novel synergistic strategy expands the scope of Ni-catalyzed reductive asymmetric cross-coupling reactions.     

Formation of low-temperature deformation-induced segregations of nickel in Fe–Ni-based austenitic alloys

ABSTRACT

The authors present the results of an investigation in Fe–Ni-Cr austenitic alloys of the low-temperature deformation-induced segregations of nickel that form in the micro regions being (i) located close to grain- and subgrain boundaries and (ii) characteristic of the concentration and magnetic inhomogeneities indicated by the appearance of a dark diffraction contrast at the electron diffraction patterns taken from these regions typical (at the same time) of an enhanced value of Curie temperature. The observed effects were connected with the micro distortions caused by the local change of lattice parameter because of an increase in nickel concentration, as well as in the result of a magnetostriction dilatation. Using methods of the X-ray energy dispersive spectroscopy (XEDS) and atomic-probe body-section radiography (tomography – APT) has made it possible to determine the borders of those regions of austenite that were characteristic of an enhanced concentration of nickel in the fields of the localisation of a deformation-induced segregation of nickel in the vicinity of grain (subgrain) boundaries of austenitic alloys of the types Fe–13Cr–30Ni and Fe–37Ni–3Ti.     

The mechanism of ethylene polymerization by nickel salicylaldiminato catalysts - Agostic interactions and their kinetic isotope effects

The ethylene polymerization reaction of a neutral nickel catalyst was studied by DFT calculations at the Becke3LYP/6-31G(d) level of theory. As in related cases a β-agostic bond stabilizes the nickel alkyl ground states. Transition states for the insertion of the olefin show a distinct α-agostic interaction, which has not been observed for late metal polymerization catalysts before. An ethylene-alkyl complex was identified as the resting state of the reaction. The overall barrier height of the reaction amounts to 17.54 kcal/mol, which slightly increases to 17.60 kcal/mol for the polymerization of deuterated ethylene. Therefore, a small positive kinetic isotope effect (k_H/k_D = 1.09) can be calculated, which is caused by the α-agostic interaction in the transition state. A comparison to other late metal based polymerization systems reveals that the ethylene coordination step of highly active catalysts is significantly lower in energy compared to catalysts which are only moderately active.     

93W合金有关力学参量的综合选评

 对93W合金材料进行了超声测量实验，并结合原有的超声测量结果进行了分析比较，提出了可以直接用冲击波速度关系式的三个系数c₀ 、λ和λ′来对钨合金的有关力学参量，如G₀、K₀、G₀′、K₀′等进行综合选评的方法。得到了一组对93W合金较为合理的力学参量推荐值。     

Chronoamperometric studies in an ammonia citrate electrolyte for the deposition of a nickel-molybdenum alloy

Dependences of the current and the chemical composition of cathodic deposits on the electrolysis time are studied in an ammonia-citrate electrolyte for the deposition of a nickel-molybdenum alloy in potentiostatic conditions. At potentials less negative than ?0.93 V, no nickel-molybdenum alloy deposition occurs and in the course of electrolysis there is observed a decrease in the current, which is connected with the blocking of the electrode surface by the formed molybdenum oxides. In the region of potentials of deposition of a nickel-molybdenum alloy there is realized the following shape of a time dependence of the current. Within the first few seconds of the electrolysis process, the current somewhat decreases. Then there occurs its increase, which is connected with the alloy deposition on the cathode. In the course of electrolysis there occurs a decrease in the molybdenum content in the cathodic deposit.     

ICP-AES测定镍基焊料中的磷

通过酸溶解试验、基体共存元素干扰实验等,建立了ICP-AES测定镍基焊料中高含量磷的分析方法.样品加标回收率为100.5%-101.0%,相对标准偏差小于0.80%.该方法简便、快速、准确可靠.     

Co-P非晶态合金电子性质和局域结构的理论研究

根据Co P非晶态合金结构的短程有序和结构中可能存在P -P相互作用的实验事实 ,选择了单磷原子簇模型ConP(n =1～ 5 )和双磷原子簇模型ConP2 (n =1～ 4 ) ,用密度泛函理论方法对其进行计算 .结果表明 ,在单磷Co2 P( 2 ) 、Co3 P( 1) 及Co4P( 2 ) 模型体系中 ,Co原子供给P原子电子 ,与电负性规则一致 ,同时Co和P之间具较强化学作用 ,可以形成稳定的原子簇 ;而在双磷和单磷原子簇Co5P( 1) 模型体系中 ,形成的原子簇不稳定 ,采用单磷Co2 P( 2 ) 、Co3 P( 1) 及Co4P( 2 ) 模型能较好地反映Co P非晶态合金的结构特点 .     

Non-isothermal short-range-order kinetics of binary alloys as influenced by solute-vacancy complexes

A model describing the roles of bound and unbound vacancies is proposed in order to predict defect decay and short-range-order kinetics of quenched binary alloys during linear heating experiments. This is an alternative treatment of a previous approach. The model has been applied to the differential scanning calorimetry (DSC) curves of Cu-5 at.% Zn quenched from different temperatures. An expression to calculate the activation energy for migration of solute-vacancy complexes was also developed which make use of DSC trace data. A value of 89.12±0.32 kJ mol^-1 was obtained for the above alloy. The relative contribution of bound and unbound vacancies to partition of effective activation energy corresponding to the ordering process as influenced by quenching temperature was also assessed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and characterization of new bis(1-aryliminomethylenylnaphthalen-2-oxy)nickel complexes and their catalytic behavior for vinyl polymerization of norbornene

The synthesized 1-aryliminomethylenylnaphthalen-2-ol derivatives reacted with nickel chloride to form bis(1-aryliminomethylenylnaphthalen-2-oxy)nickel complexes. All resultant compounds were structurally characterized by elemental analyses, IR and H NMR, and the structures of the formed complexes were elucidated by X-ray crystal structure analysis. The complexes show high catalytic activities for the vinyl polymerization of norbornene in the presence of methylaluminoxane. The catalytic activity variations have been followed by gas chromatography through monitoring the conversion of norbornene.     

An experimental study on the kinetics of leaching for the preparation of a Raney-silver catalyst

A Raney-Ag catalyst was prepared by leaching out aluminium from a Raney Ag-Al alloy with NaOH solution. The kinetics of leaching has been investigated in a stirred-batch-reactor at various temperatures by using alloy particles of different sizes. The kinetic model best fitting the experimental results has been determined. This revised version was published online in June 2006 with corrections to the Cover Date.