Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

Hydroxyapatite gels and nanocrystals prepared through a sol-gel process

We have investigated the effect of the Ca/P molar ratio on the structural and morphological properties of hydroxyapatite (HA) gels and nanocrystals. The sol-gel process was carried out in aqueous, and alternatively in alcoholic medium (50% water-50% ethanol), at 37°C. Gel samples were obtained by drying the sols at 37°C or at 80°C, whereas powder samples were obtained by filtering the sols. Heat treatment at temperatures as low as 300°C is enough to obtain pure HA from the gels with a Ca/P molar ratio of 1.00 and 1.67. At variance, heat treatment of the gels with a Ca/P of 2.55 always produces secondary phases. The degree of crystallinity of HA increases with the Ca/P molar ratio of the sols, and it is slightly affected by the presence of ethanol in the precipitation medium. Filtering of the sols provides powders constituted of nanocrystalline HA that exhibit degree of crystallinity, crystal morphology and thermal stability closely related to the sols composition.     

复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

聚乳酸纳米复合材料的研究进展

聚乳酸是一种重要的可生物降解/吸收高分子材料,广泛地用作可降解塑料、纤维和生物材料,市场前景广阔.它具有与聚烯烃相当的力学强度和加工性能,但耐热性和抗冲性较差.为满足各种应用的需要,其热性能、力学性能和气体阻隔性等尚需进一步提高.通过与无机纳米材料复合的方法,可以明显地提高聚乳酸的性能.本文介绍了近年来聚乳酸有机-无机纳米复合材料的制备、结构与性能等方面的研究进展,对三者的相互关系进行了评述,并对今后的研究方向进行了展望.     

Covalent modification of calcium hydroxyapatite surface by grafting phenyl phosphonate moieties

The reaction between phenyl phosphonic dichloride (C₆H₅P(O)Cl₂) and synthetic calcium hydroxy- and fluorapatite has been investigated. The presence of mono- or polymeric (C₆H₅PO) fragment bound to hydroxyapatite was evidenced by IR, and solid-state ³¹P NMR spectroscopy. X-ray powder analysis has shown that the apatitic structure remains unchanged during the reaction. In contrast, no reaction was found using fluorapatite. According to the results found for these two different apatites a mechanism was proposed for the formation of covalent P-O-P bonds as the result of a reaction between the C₆H₅P(O)Cl₂ organic reagent and (HPO₄)⁻ and/or OH⁻ ions of the hydroxyapatite.     

Protein Adsorption onto Nanosized Hydroxyapatite Particles for Controlled Drug Release

Nanosized hydroxyapatite(nsHAp) was synthesized to examine its possibility as a controlled release carrier of protein. To achieve effective protein release from nanosized hydroxyapatite, the study of the adsorptive properties of protein on nsHAp and different influence parameters such as pH, calcium, and phosphate concentrations during the adsorption process is necessary. Ovalbumin(OVA) was selected as the model of growth factors. The results show that the amount of OVA adsorbed onto nsHAp in acetic buffer(pH=3.6) is more than that in acetic buffer(pH=5.6) because of the electric interaction. The amount of OVA adsorption in phosphate buffer solution(PBS) is smaller than that in acetic buffer because of surface complexation and surface hydroxylation. The presence of Ca2 dramatically increases the adsorbed amount of OVA in acetic buffer on maintaining the same pH. Meanwhile, the release kinetics of OVA adsorbed onto nsHAp(nsHAp-OVA) was also examined. The amount of released OVA in PBS(pH=5.6) was significantly smaller than that released in solution of pH=7.0. All the results suggest that nanosized hydroxyapatite particles could be successfully used as controlled released carrier of protein.     

反相微乳液法制备棒状羟基磷灰石纳米粒子

在(Tritonx-100 Tween 80)，环己烷，(正己醇 正丁醇)，0．5mol／L Ca(NO3)2水溶液反相微乳液体系中，采用滴加0．3mol／L(NH4)2HPO4水溶液的加料方式成功制备出直径在20～25nm，长度在28～64nm的棒状羟基磷灰石纳米粒子。通过对(Triton X-100 Tween 80)，环己烷，(正己醇 正丁醇)／0．5mol／L Ca(NO3)2水溶液三元相图及水溶液反应机理的分析，确定了最佳反相微乳液组成；研究了HLB值和表面活性剂用量对羟基磷灰石颗粒大小的影响。实验结果表明，最佳反相微乳液组成为：47．6(wt)％的环己烷、37．4(wt)％的表面活性剂和助表面活性剂、15(wt)％0．5mol／L的Ca(NO3)2水溶液。     

A comparison of the adsorption of saliva proteins and some typical proteins onto the surface of hydroxyapatite

Adsorption of protein from saliva on hydroxyapatite was compared with adsorption of several typical proteins with different electric charges, i.e. lysozyme, human serum albumin, β-lactoglobulin and ovalbumin. Adsorbed amounts of these proteins were determined and electrophoretic mobilities of protein-covered hydroxyapatite particles were measured, at different values for the adsorbed mass and, therefore, at various degrees of surface coverage. Also, adsorption kinetics were investigated by streaming potential measurements of a hydroxyapatite surface in contact with a protein solution, allowing monitoring of changes in the zeta-potential of the protein-covered hydroxyapatite surface in real time. The adsorbed amounts show that, as compared to most of the other proteins, the saliva proteins have remarkably low adsorption affinity. The measured values for the electrophoretic mobilities indicate that the positively charged proteins in the saliva mixture preferentially adsorb onto the negatively charged hydroxyapatite surface; this is most pronounced at low protein concentration in solution (i.e. at low coverage of the surface by the protein). Preferential uptake of the positively charged saliva proteins during the initial stages of the adsorption process is also concluded from the results of the kinetics experiments. Preferential adsorption of positive proteins is somewhat suppressed by the presence of Ca²⁺ ions in the medium. The results suggest that an acquired pellicle on a tooth in an oral environment contains a significant fraction of positively charged proteins. The positively charged proteins in the pellicle reduce the zeta-potential at the tooth surface to low values; consequently, electrostatic forces are expected to play only a minor role in the interaction with other components (e.g. bacterial cells).     

Electrochemical Study of the Interactions of DNA with Redox‐Active Molecules Based on the Immobilization of dsDNA on the Sol‐Gel Derived Nano Porous Hydroxyapatite‐Polyvinyl Alcohol Hybrid Material Coating

A novel type of sol‐gel inorganic‐organic hybrid material coated on glassy carbon electrode used for immobilization of double‐stranded DNA (dsDNA) and study of dsDNA with redox‐active molecules was developed. The hybrid material coating was produced by sol‐gel method with nano hydroxyapatite (HAp)‐polyvinyl alcohol (PVA). The optimum composition of the hybrid material was first examined, and the morphology of the nano HAp‐PVA coatings was investigated with the help of Scanning Electron Microscope (SEM). DsDNA was immobilized in/on the nano HAp‐PVA hybrid coatings by adsorption and the characteristics of the dsDNA/HAp‐PVA/GCE were studied by cyclic voltammetry (CV) using the probes of Co(phen) and Fe(CN) . The results indicate that the dsDNA can be immobilized on the nano porous HAp‐PVA coating effectively and its stability can satisfy the necessity of study on the interactions of dsDNA with redox‐active molecules on the electrode surface. Co(bpy) and Co(phen) were used as the model molecule to study the interactions of dsDNA with redox‐active molecules. Information such as ratio (K_Ox/K_Red) of the binding constant for the oxidized and reduced forms of a bound species, interaction mode, including change in the mode of interaction, and “limiting” ratio K /K at zero ionic strength (μ) can be obtained using dsDNA/HAp‐PVA/GCE with about 2 μg of DNA samples.     

Synthesis and characterization of novel elastomeric poly(D,L-lactide urethane) maleate composites for bone tissue engineering

Here, we report the synthesis and characterization of a novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its composites with nano-hydroxyapatite (nHA) as potential weight-bearing composite. The 4PLAUMA/nHA ratios of the composites were 1:3, 2:5, 1:2 and 1:1. FTIR and NMR characterization showed urethane and maleate units integrated into the PLA matrix. Energy dispersion and Auger electron spectroscopy confirmed homogeneous distribution of nHA in the polymer matrix. Maximum moduli and strength of the composites of 4PLAUMA/nHA, respectively, are 1973.31 ± 298.53 MPa and 78.10 ± 3.82 MPa for compression, 3630.46 ± 528.32 MPa and 6.23 ± 1.44 MPa for tension, 1810.42 ± 86.10 MPa and 13.00 ± 0.72 for bending, and 282.46 ± 24.91 MPa and 5.20 ± 0.85 MPa for torsion. The maximum tensile strains of the polymer and composites are in the range of 5–93%, and their maximum torsional strains vary from 0.26 to 0.90. The composites exhibited very slow degradation rates in aqueous solution, from approximately 50% mass remaining for the pure polymer to 75% mass remaining for composites with high nHA contents, after a period of 8 weeks. Increase in ceramic content increased mechanical properties, but decreased maximum strain, degradation rate, and swelling of the composites. Human bone marrow stem cells and human endothelial cells adhered and proliferated on 4PLAUMA films and degradation products of the composites showed little-to-no toxicity. These results demonstrate that novel 4-arm poly(lactic acid urethane)-maleate (4PLAUMA) elastomer and its nHA composites may have potential applications in regenerative medicine.