巧用齐次化与非齐次化的思想解不等式竞赛题

解析式是中学数学的重要内容之一,也是研究函数、方程、不等式的基础,数学的其它各分支学科均离不开解析式的恒等变换.因此,熟练地掌握一些解析式的变形规律是学好代数及相关学科的前提.本文主要讨论如何利用齐次化与非齐次化的思想,解决一些竞赛中的不等式问题.定义1设xi≥0(i     

相位差与q变形广义相干叠加态的压缩特性

对于q变形的非简谐振子广义相干态的叠加态β〉+eiφβeiδ〉,其量子涨落的可能高阶压缩阶数可以表示为k≠2πn/δ,这里n是整数.当δ=π时,压缩阶数不能是偶数即只能是奇数,这正是q变形非简谐振子广义奇偶相干态的结果.由此表明参数相位差δ对决定q变形的非简谐振子广义相干态叠加态的高阶压缩阶数起决定性作用.     

Identical Superdeformed Bands in ^171Ta and ^173Re

The rotational band built on the i13/2 proton [660,1/2] Nilsson state in ^173Re is proven to be identical to that in ^171Ta.The close similarity of the two bands in ^171Ta and ^173Re suggests that the ^173Re nucleus with the odd proton based on the i13/2 [660,1/2] Nilsson state may be triaxially superdeformed.     

κ玻色子q相干态的反聚束效应

研究了q变形湮没算符高次幂（αq^k,κ≥3)本征态的反聚束效应，并就κ=3的情况用数值计算方法研究了q变形参数对该效应的影响。结果表明，当q变形相干态中谐振子的强度x=|z|^2在某些区间内取值时，αq^k的本征态将呈现反聚束效应，并且这一效应明显地受到q参数的影响。当参数q取定时，随着q变形光场强度的变大，该光场的光子数涨落在经典（或量子）和量子（或经典）特性之间交替地变化。     

Deformation Morphology underneath the Vickers Indent in Bulk Metallic Glasses

Plastic deformation behaviour of Zr52.5Al10Ni10Cu15Be12.5 and Mg65Cu25Gd10 bulk metallic glasses (BMGs) is studied by using the depth-sensing nanoindentation and microindentation. The subsurface plastic deformation zone of the BMGs is investigated using the bonded interface technique. Both the BMGs exhibit the serrated flow depending on the loading rate in the loading process of indentation. Slow indentation rates promote more conspicuous serrations, and rapid indentations suppress the serrated flow. Mg-based BMG shows a much higher critical loading rate for the disappearance of the serration than that in Zr-based BMG. The significant difference in the shear band pattern in the subsurface plastic deformation zone is responsible for the different deformation behaviour between the two BMGs. Increase of the loading rate can lead to the increase of the density of shear bands. However, there is no distinct change in the character of shear bands at the loading rate of as high as1000 nm/s.     

混合曲率曲面变形方程的Tricomi问题——Ⅱ.解的存在性

本文在很弱的条件下,证明对混合曲率曲面无穷小变形方程的Tricomi问题,存在L₂弱解和H₁强解。     

激光散斑法对预制缺口岩石的缝端微裂区变形过程研究

本文应用激光散斑法对预制缺口岩石的缝端微裂区进行了无接触位移测量,求得加裁点位移 d 和缝端张开位移η.通过对主裂缝的跟踪量测,表明该试件的裂缝在失稳前存在着亚临界扩展.在此阶段,预制裂缝缝端主裂缝的形式推测主要是类似“啮合”裂缝及部分张开裂缝,当缝端张开位移达到临界值时,荷载稍增,裂缝即快速扩展,以致发生断裂.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

弱刚度件加固装夹技术

弱刚度件通过加固装夹可以提高刚度，实现其少无变形装夹；薄球壳利用加固装夹方法可以解决加工变形问题。     

求解非对称线性方程组的QMRGCGS方法

1 引言 求解非对称线性方程组Ax=b的双共轭梯度方法(BCG)[3]和它的变形共轭梯度平方方法(CGS)[6]都有典型的不规则收敛行为,后来Freund和Nachtigal提出一种BCG类方法,即拟极小剩余方法(QMR)[7],用来补救BCG方法的收敛性并且产生了光滑的收敛曲线。然而,象BCG方法一样,QMR方法要用到系数矩阵A及其转置A~T与向量的乘积,为了解决这一问题,Freund提出TFQMR方法,此方法具有拟极小剩余性,同时不需用到A~T与向量的乘积。