二元液态金属Cu-Ni和Ag-Cu凝固过程的分子动力学模拟研究

用Quantum Sutton-Chen多体势对Ag6Cu4和CuNi液态金属凝固过程进行了分子动力学模拟研究.在冷却速率2×1012到2×1014K/s范围内,CuNi总是形成fcc晶体结构,而Ag6Cu4总是形成非晶态结构.考虑到CuNi及AgCu中原子半径之比分别为1.025和1.13,那么模拟结果证实了原子的尺寸差别是非晶态合金形成的一个主要影响因素.此外采用键对及原子多面体类型指数法对凝固过程中微观结构组态变化的分析,不但能说明二十面体结构在非晶态合金形成和稳定性中所起的关键作用,又有助于对液态金属的凝固过程、非晶态结构特征的深入理解.     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

微量元素La对Al—Si合金凝固过程的影响

本文用差热分析法系统地研究了La掺杂对Al-Si共晶合金、亚共晶、超共晶的动态凝固过程的影响。结果表明,La促使α(Al)成核,使体系中初晶α(Al)的析出温度比AJ-Si二元合金中Al初晶的实际析出温度明显提高;La对初晶Si的成核和长大起抑制作用,使超共晶中初晶Si相析出温度较二元合金中的Si初晶的实际析出温度明显降低。     

Freezing of Lennard-Jones fluid in cylindrical nanopores under tensile conditions

We have shown the Lennard-Jones (LJ) phase diagram for a slit-shaped nanopore by molecular simulations and thermodynamically predicted the results with no adjustable parameter. With this success, LJ phase diagrams are predictable. In this study, the freezing of an LJ CH₄ capillary condensate under a tensile condition in a nonstructural carbon nanopore with a cylindrical geometry was examined using molecular dynamics (MD) simulation. We employ a unit cell in contact with a bulk vapor phase, which is useful for the determination of the bulk vapor pressure in equilibrium with the molecules in a pore. The MD simulation results show liquid-solid (amorphous) phase transitions with a variation in the bulk vapor pressure. The frozen particles are arranged in concentric circular regions along the wall similar to those reported by Maddox and Gubbins. The freezing points are determined from the variations in density, enthalpy, arrangement, and structural functions. The obtained liquid-solid coexistence points are found to exhibit a significant dependence of the freezing point on the equilibrium bulk vapor pressure, forming an extraordinarily skewed curve on the p-T diagram, in contrast to the bulk phase coexistence that is represented by an almost vertical line. The origin of the significant dependence is considered to be the Laplace effect on the capillary condensate similar to the case with a slit-shaped pore. A simple model, which the authors earlier presented for slit-shaped nanopores, successfully predicted the p-T relation of the freezing point for cylindrical nanopores as well.     

DRDF analysis of wide-angle x-ray scattering of natural rubber

A differential radial distribution function (DRDF) of molten natural rubber (NR) was derived from its wide-angle x-ray scattering (WAXS) data. Three peaks with Bragg spacings 4.85, 2.31, and 1.23 Å corresponding, respectively, to interchain, C₁-C₃ and C₁ -C₂ distances are present in the corrected WAXS curve. The derived DRDF, which is shown to be greatly improved than the ones published so far, contains six peaks located at 1.51, 2.48, 3.98, 5.68, 10.65, and 15.25 Å. Maximum contributions of intramolecular atomic distances to the radial distribution peaks were estimated and compared with the experimental results. The comparison shows that the first three peaks are intramolecular in origin and the remaining peaks are predominantly due to intermolecular regularities. A periodicity of an approximately constant interval of 5.26 Å is found between the intermolecular peaks and is attributable to the organizations of more or less parallel chain segments in the material. This finding provided additional evidence for the presence of local lateral ordering to the extent of about 30 Å in molten-state natural rubber.     

Determination of fungicides in sediments using a dispersive liquid–liquid microextraction procedure based on solidification of floating organic drop

A dispersive liquid–liquid microextraction procedure based on solidification of floating organic droplet has been investigated for the determination of fungicides (cyprodinil, difenoconazole, myclobutanil, and spiroxamine) in sediments by HPLC with diode array detection. In the overall extraction process, the extraction solvents can be separated easily from the sample solution, and the experiment time was shortened. Moreover, several parameters such as the type and volume of the extraction solvent and dispersive solvent, centrifugal speed, extraction time, and salt effect that affect the extraction efficiencies of the target fungicides were studied and optimized. Under the optimized conditions, the LOD for the target analytes were in the range of 0.1–0.5 μg/g. Satisfactory recoveries of the target analytes in the sediment samples were 81.00–99.00%, with RSDs (n = 5) that ranged from 1.8 to 6.5%. Finally, the simple, sensitive, and environmentally friendly method was successfully applied to determine the target fungicides in actual sediment samples.     

Determination of 12 additives in beverages by evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets combined with liquid chromatographyEI北大核心CSCD

An analytical method for the simultaneous determination of 12 additives in beverages was developed using evaporation-assisted dispersive liquid-liquid microextraction based on the solidification of floating organic droplets EVA-DLLME-SFOcombined with high performance liquid chromatography HPLC. The samples were extracted twice with 70%V/Vmethanol aqueous solution and extracted by EVA-DLLME-SFO method after the combination of the extractsand finally determined by HPLC. Extraction parameterssuch as types and amounts of extractantevaporant and heating agentthe concentration of saltand the extraction time were optimized. Under the optimized conditionsthere were good relationships in the ange of 0.25-50 μµg/mL with the limits of detection of 1.5 to 13.6 mg/kg and limits of quantification of 5.2 to 45.3 mg/kg. The recoveries at three spiked levels1025 and 50 mg/kgwere 76.8% to 101.2% with the relative standard deviations of 0.11% to 4.7%. The method can be used for rapid detection of 12 additives in beverages. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

Petrov-Galerkin methods for natural convection in directional solidification of binary alloys

A Petrov-Galerkin finite element method is presented for calculation of the steady, axisymmetric thermosolutal convection and interface morphology in a model for vertical Bridgman crystal growth of nondilute binary alloys. The Petrov-Galerkin method is based on the formulation for biquadratic elements developed by Heinrich and Zienkiewicz and is introduced into the calculation of the velocity, temperature and concentration fields. The algebraic system is solved simultaneously for the field variables and interface shape by Newton's method. The results of the Petrov-Galerkin method are compared critically with those of Galerkin's method using the same finite element grids. Significant improvements in accuracy are found with the Petrov-Galerkin method only when the mesh is refined and when the formulation of the residual equations is modified to account for the mixed boundary conditions that arise at the solidification interface. Calculations for alloys with stable and unstable solute gradients show the occurrence of classical flow transitions and morphological instabilities in the solidification system.     

Optimization of a novel method based on solidification of floating organic droplet by high-performance liquid chromatography for evaluation of antifungal drugs in biological samples

In this study, a simple, rapid, and highly efficient liquid-phase microextraction method based on solidification of floating organic droplet was coupled with high performance liquid chromatography-photo diode array detection (HPLC-PDA) for determination of ketoconazole, clotrimazole, and miconazole as antifungal drugs. Central composite design (CCD) was used for optimization of several factors affecting the extraction efficiency. The optimized conditions were established to be 550 rpm for stirring rate, 35 min for extraction time, 57 °C for extraction temperature, 8.5 for solution pH, 10 μl for organic solvent volume, and 7% (w/v) of NaCl for ionic strength. Limit of detections (LODs) of the extraction method ranged from 0.01 to 0.1 μg L⁻¹ and the linear dynamic ranges (LDRs) ranged from 0.1 to 300 μg L⁻¹ for the three antifungal drugs. Relative standard deviations (RSDs) of the proposed method were 5-11%. Preconcentration factors in the range of 306-1350 were obtained at extraction time of 35 min. Finally, performance of the proposed method was evaluated for the extraction and determination of the drugs’ levels in microgram per liter in samples and satisfactory results were obtained.     

The effect of solute on ultrasonic grain refinement of magnesium alloys

An experimental study has been conducted to assess the structural refinement of magnesium and its alloys by ultrasonic irradiation during solidification. It is shown that (i) ultrasonic irradiation leads to significant refinement only in the presence of adequate solute, which is alloy dependent; (ii) the attendant grain density increases linearly with increase in solute content at a given irradiation level; (iii) increasing the solute content at a low irradiation level above the cavitation threshold is more effective than substantially increasing the irradiation intensity; and (iv) the difference in the grain size between two ultrasonicated magnesium alloys is mainly determined by the solute content rather than the irradiation intensity. In view of these, the effect of ultrasonic irradiation on solute redistribution in a solidifying magnesium alloy seems rather limited even at a substantial intensity level such as 1700 W cm⁻². The implications of these findings are discussed and a mechanism is proposed to account for the experimental observations.