Micro enzymatic assay coupled to capillary electrophoresis via liquid junction

Summary A system for capillary electrophoresis combined with enzymatic assay has been evaluated for the two enzymes glucose-6-phosphate dehydrogenase and 6-phosphogluconate dehydrogenase. Instrumentation included a post-column reactor coupled to the separation capillary by a liquid junction. A technique for generating a substrate solution flow into the reactor by utilizing two high voltage supplies is proposed. This method offers a high degree of freedom in optimizing the separation and enzymatic reaction conditions individually. Possibilities for improving the enzymatic assay sensitivity were also examined.     

微全分析系统检测方法的研究进展

综述了不同类型的检测方法在微全分析系统的应用，并简述了各类型的检测方法的优缺点。引用文献92篇。     

Quality assurance for the analytical data of micro elements in food

The micro element content of food is an important quality index due to the action of these elements on human health. In this article, we discuss how to ensure the reliability of analytical data on micro elements in order to truly represent the condition of food. Sampling, treatment of the analytical sample, selection of the analytical method, standard solution, and certified reference material, blank test, calibration of the instrument and equipment, application of the quality control chart, assessment of the final analytical result, and quality assurance system are briefly described. Received: 5 July 2001 Accepted: 19 November 2001     

Simultaneous Measurement of Droplet Size and Three-Components of Velocity in Spray

The combination of the optical diagnostics and image processing technique has produced various methods of practical measurement in engineering. The measurement of size and velocity of droplets in fuel spray is one typical example. In general, the spray is a complicated and three-dimensional two-phase flow; therefore multi-dimensional field measurement of the spray field is indispensable. In the present paper, a technique of simultaneous measurement of droplet size and three-components of velocity is proposed and applied to spray issuing from the swirl nozzle as a practical application. The focused image of glare points is captured by a stereoscopic arrangement, and droplet size and the three-components of velocity are evaluated from the doublet image. Fundamental optical arrangements to capture the image of the glare points with a stereo view are established, and the feasibility and the accuracy of the technique are confirmed. © 2004 The Optical Society of Japan     

Computational Electrochemistry: A Model to Studying Ohmic Distortion of Voltammetry in Multiple Working Electrode,Microfluidic Devices,an Adaptive FEM Approach

Characteristics of mass transport and potential distribution applicable to microfluidic electrochemical flow cell devices has been modelled using the finite element method. A flexible, automatic grid generation algorithm has been combined with an a‐posteriori error indication technique presented by Nann and Heinze to allow irregular cell geometries to be modelled. The code has been applied to the problem of steady state generator – detector linear sweep voltammetry in a channel flow cell showing the effects of IR drop on the voltammetric response of each electrode.     

Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

Monte Carlo simulation of grain growth in polycrystalline materials

Understanding the kinetics of grain growth, under the influence of second phase (such as impurities, voids and bubbles) is fundamental to advances in the control of microstructural evolution. As a precursor to this objective, we have investigated the grain growth kinetics in a polycrystalline material using a standard Q-state Potts’ model under Monte Carlo settings. Based on physical reasoning, new modifications are suggested to circumvent some of the disadvantages in the basic Potts model. The efficacy of these modifications vis-à-vis the basic model is verified. The influence of second phase particles on the impurity loaded grain boundaries is investigated for the study of grain growth kinetics.     

微型圆光栅刻划偏心量的控制

对微型圆光栅刻划偏心误差问题进行了讨论。提出了微型圆光栅刻划时偏心调试误差的公差范围。     

As(Ⅲ)-Cu(Ⅱ)协同抑制鲁米诺-MnO_4~-化学发光反应的研究及其应用

本文报道了As(Ⅲ)-Cu(Ⅲ)两种离子对鲁米诺-MnO_4~-化学发光反应的协同抑制作用,据此拟定了测定微量As(Ⅲ)的化学发光新方法。该法灵敏度较高,检测限为6.8×10~(-9)g/ml As(Ⅲ),选择性也较好,同时线性范围宽(7.0×10~(-9)～3.0×10~(-6)g/ml),测定手续简便。应用本法测定工业废水中的As(Ⅲ),结果满意。