The glow curve structure for the LiF:Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures

The glow curve structures for LiF:Mg,Cu,Na,Si TL detectors with various dopant concentrations and sintering temperatures were investigated for the improvement of the glow curve structure and sensitivity of the TL detector. The dopant concentrations were varied over the following ranges: Mg (0–0.25 mol%), Cu (0–0.07 mol%), Na and Si (0–1.5 mol%). With increasing Cu concentration, the intensity of the main peak was intensified and reached a maximum at a concentration of 0.05 mol%. The high-temperature peak was reduced. The dependency of the main peak intensity on the Mg concentration exhibits a sharp maximum at 0.2 mol%. The intensity of the high-temperature peak tends to rise slightly with increasing Mg concentration. It was found that the optimum concentrations of the dopants in the LiF:Mg,Cu,Na,Si TL material are Mg: 0.2 mol%, Cu: 0.05 mol%, Na and Si: 0.9 mol%. The dependency of the main peak intensity on sintering temperature exhibits a very sharp maximum at 830°C. The high-temperature peak was rapidly reduced after 825°C.     

Superoxes,high temperature universal phases in (GC)2

Most of the common classes of organic compounds chromatograph normally on Superoxes. There is no tailing or adverse effect from excessively different activity different activity coefficients. Superoxes are therefore universal phases for gas chromatography. This is also expressed by a wide useful temperature range from ～50° to ～300°. High MW Superox-4 has a MAOT about 20° higher than the lower MW Superox-0.1. Several applications illustrating the versatility of Superox phases in (GC)² are presented.     

Chemical studies on the anobiidae: Sex pheromone of the drugstore beetle, stegobium paniceum (L.) (coleoptera)

Chemical an spectroscopic evidence is presented to show that 2,3-dihydro-2,3,5-trimethyl-6-(1-methyl-2-oxobutyl)-4H-pyran-4-one (10) is the sex pheromone produced by the female drugstore beetle, Stegobium paniceum L.     

Atomistic insights into the selective therapeutic activity of 6-(2,4-difluorophenoxy)-5-((ethylmethyl)pyridine-3-yl)-8-methylpyrrolo[1,2-a]pyrazin-1(2H)-one towards bromodomain-containing proteins

Cross-target effect has been one of the major mechanisms of drug toxicity, this has necessitated the design of inhibitors that are specifically tailored to target particular biomolecules. 6-(2,4-difluorophenoxy)-5-((ethylmethyl)pyridine-3-yl)-8-methylpyrrolo[1,2-a] pyrazin-1(2H)-one (Cpd38) is an inhibitor possessing high inhibition rate and tailored specificity towards bromodomain-containing protein 4 (BRD4). In this research, we used an array of computational techniques to provide insight at the atomistic level the specific targeting of BRD4 by Cpd38 relative to the binding of Cpd38 with E1A binding protein P300 (EP300); another bromodomain-containing protein (BCP). Comparatively, binding of Cpd38 improved the conformational stability and compactness of BRD4 protein when compared to the Cpd38 bound EP300. Also, Cpd38 induced a conformational change in the active site of BRD4 that facilitated a complementary pose between Cpd38 and BRD4 suitable for effective atomistic interactions. Expectedly, thermodynamic calculations revealed that the Cpd38-BRD4 system had higher binding energy (−36.11 Kcal/mol) than the Cpd38-EP300 system with a free binding energy of −15.86 Kcal/mol. Noteworthy is the opposing role Trp81 (acting as hydrogen bond acceptor) and Pro1074 (acting as hydrogen bond donor) found on the WPF and LPF loops respectively play in maintaining Cpd38 stability. Furthermore, the hydrogen bond acceptor/donator ratio was approximately 4:1 in Cpd38-BRD4 system compared with 2:1 in Cpd38-EP300 system. Taken together, atomistic insights and structural perspectives detailed in this report supplements the experimental report supporting the improved selectivity of Cpd38 for BRD4 ahead of other BCPs while providing leeway for the future design of BET selective agents with better pharmacological profile.     

Effect of the Ethanol/BTC Ratio on the Methane Uptake of Mechanochemically Synthesized MOF-199

We report on a detailed textural analysis of mechanochemically synthesized MOF-199 including N₂ adsorption-desorption and CO₂ adsorption isotherms data at 77 K and 273 K (up to atmospheric pressure), respectively, and CH₄ adsorption data at 298 K (up to 35 bar). We used the isotherm adsorption data to determine the micropore volume of the MOF-199 structures, to establish their methane uptake capacity and to understand how these properties depended on the Ethanol/BTC ratio used during the synthesis. The maximum methane uptake capacity for our specimens was recorded at 130 v/v at 35 bars. These results open an avenue for a better understanding of alternative manufacturing processes of MOF structures for gas storage applications.     

Thermal quenching of thermoluminescence in TLD-200, TLD-300 and TLD-400 after β-irradiation

The dosimetric characteristics of many TL materials are influenced by changes in location, size and shape of the glow curves due to changes in the heating rate. In this study, the effect of heating rate on the integrated peak areas of CaF₂:Dy (TLD-200), CaF₂:Tm (TLD-300) and CaF₂:Mn (TLD-400) crystals have been investigated after β-irradiation. It was observed that the peak temperatures of all peaks shifted to the high temperature sides and the integrated peak areas decrease as the heating rate increases due to thermal quenching, whose efficiency increases as temperature increases.     

On the impact of IQI on cooperative NOMA with direct links in the presence of imperfect CSI

Cooperative non-orthogonal multiple access (CNOMA) is considered as a promising technique to improve network coverage, reliability and transmission for future wireless communication networks. Meanwhile, transceivers can suffer from a number of hardware imperfections that will significantly reduce their performance, such as phase noise and in-phase/quadrature-phase imbalance (IQI). In this paper, we investigate the effect of in-phase and quadrature-phase imbalance (IQI) on CNOMA with direct links in the presence of imperfect channel state information (ICSI). The outage probability (OP) and throughput expressions are derived to evaluate the performance behaviors of the CNOMA with direct links under the IQI and ICSI imperfections. Theoretical analyzes are verified by Monte Carlo simulation. The effect of the IQI on the CNOMA with the direct links has been studied with different parameters (image rejection ratio (IRR), power allocation) and compared with conventional NOMA to clearly observe the degrading effects of imperfections on the systems. The simulation results demonstrate that the IQI and ICSI have a negative impact on the outage and throughput performance.     

Channel temporal correlation-based optimization method for imperfect underwater acoustic channel state information

The rapid time variations and large channel estimation errors in underwater acoustic (UWA) channels mean that transmitters for adaptive resource allocation quickly become outdated and provide inaccurate channel state information (CSI). This results in poor resource allocation efficiency. To address this issue, this paper proposes an optimization approach for imperfect CSI based on a Gauss–Markov model and the per-subcarrier channel temporal correlation (PSCTC) factor. The proposed scheme is applicable to downlink UWA orthogonal frequency division multiple access systems. The proposed PSCTC factors are measured, and their long-term stability is verified using data recorded in real-world sea tests. Simulation and experimental results show that the optimized CSI effectively mitigates the effects of the temporal variability of UWA channels. It demonstrates that the resource allocation scheme using optimized CSI achieves a higher effective throughput and a lower bit error rate than both imperfect CSI and the CSI predicted by the recursive least-squares (RLS) algorithm.     

Application of compressed sensing to in vivo 3D ¹⁹F CSI

This study shows how applying compressed sensing (CS) to (19)F chemical shift imaging (CSI) makes highly accurate and reproducible reconstructions from undersampled datasets possible. The missing background signal in (19)F CSI provides the required sparsity needed for application of CS. Simulations were performed to test the influence of different CS-related parameters on reconstruction quality. To test the proposed method on a realistic signal distribution, the simulation results were validated by ex vivo experiments. Additionally, undersampled in vivo 3D CSI mouse datasets were successfully reconstructed using CS. The study results suggest that CS can be used to accurately and reproducibly reconstruct undersampled (19)F spectroscopic datasets. Thus, the scanning time of in vivo(19)F CSI experiments can be significantly reduced while preserving the ability to distinguish between different (19)F markers. The gain in scan time provides high flexibility in adjusting measurement parameters. These features make this technique a useful tool for multiple biological and medical applications.