砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

Experimental investigation of time-dependent cavitation in an oscillatory squeeze film

The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while the other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.     

厚度对非极性聚合物薄膜驻极体电荷储存及电荷动态特性的影响

以Du Pont公司的商用Teflon FEP A型薄膜为例，通过热脉冲技术、等温表面电位衰减测量和开路热刺激放电电流谱分析等实验结果，讨论了经常温和高温电晕充电后样品厚度对薄膜驻极体的沉积电荷密度、薄膜驻极体的内电场、体电导率以及电荷储存稳定性的影响.通过热脉冲技术组合电导率温度曲线的测量，研究了在不同温度条件下样品厚度对沉积电荷层的平均电荷重心移动的影响.结果表明：在充电参数一定的条件下，随着膜厚的降低，储存电荷密度上升，但电荷稳定性有所下降.因此，合理地调控薄膜厚度，可以有效地优化驻极体的电荷储存能 关键词： 厚度 驻极体 电荷储存能力 电荷稳定性     

Maintenance of Soft Calibration Models in the Determination of Zinc,Cadmium, Lead and Copper by Differential Pulse Anodic Stripping Voltammetry

A strategy for constructing a global multivariate calibration model that includes calibration samples measured over time on different days is developed and applied in electroanalysis. Both synthetic and real samples (tap, extracted and river water) are analyzed by differential‐pulse anodic stripping voltammetry, showing the suitability of the global model constructed that provides successful results similar to those of the usual multivariate calibration. In addition the capability of discrimination of this model is evaluated in prediction for the mean of three replicates with estimation of probability of false noncompliance, α, and false compliance, β, being found 3.1, 11.2, 6.7 and 64.7 nM for nominal concentrations of zinc, cadmium, lead and copper of 96.0, 40.4, 37.3 and 328.0 nM respectively when α=β=0.05. It has been proven that the use of the global calibration does not imply a loss of multivariate analytical sensitivity, using this parameter as quality index of the analytical procedure. The viability of using calibration maintenance strategies with electroanalytical techniques is shown, providing a way to save time and experimental effort when these techniques are used in routine analysis.     

6σ管理中需要澄清的几个问题

6σ管理作为组织实施连续质量改进的一种经营策略,已引起企业界和学术界的极大兴趣,并在一些企业中得到很好应用。正确实施6σ,需要对其基本概念、假设条件、相关约束等有一个较为全面的了解和认识。本文探讨了6σ文献和应用过程中需要关注的几个问题,其中包括6σ的基本概念和特点;分布假设;过程均值1.5σ漂移的可行性;过程能力指数;短期波动和长期波动;6σ改进和6σ设计等。     

Optimum Gas Journal Bearing with the Flexible Surface

The optimum shape of the cylindrical internal deformable (flexible) surface of a gas journal bearing of infinite length is designed. The variational problem of determining the clearance shape giving the maximum bearing load capacity is formulated and solved.     

Coupled lubrication and Stokes flow finite elements

A method is developed for performing a local reduction of the governing physics for fluid problems with domains that contain a combination of narrow and non‐narrow regions, and the computational accuracy and performance of the method are measured. In the narrow regions of the domain, where the fluid is assumed to have no inertia and the domain height and curvature are assumed small, lubrication, or Reynolds, theory is used locally to reduce the two‐dimensional Navier–Stokes equations to the one‐dimensional Reynolds equation while retaining a high degree of accuracy in the overall solution. The Reynolds equation is coupled to the governing momentum and mass equations of the non‐narrow region with boundary conditions on the mass and momentum flux. The localized reduction technique, termed ‘stitching,’ is demonstrated on Stokes flow for various geometries of the hydrodynamic journal bearing—a non‐trivial test problem for which a known analytical solution is available. The computational advantage of the coupled Stokes–Reynolds method is illustrated on an industrially applicable fully‐flooded deformable‐roll coating example. The examples in this paper are limited to two‐dimensional Stokes flow, but extension to three‐dimensional and Navier–Stokes flow is possible. Copyright © 2003 John Wiley & Sons, Ltd.     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

甲醛与乙腈相互作用的理论研究

在HF/ 6 311G(d ,p)、MP2 / 6 311G(d ,p)和B3LYP/ 6 311G(d ,p)水平上 ,对H2 CO和CH3 CN以及设计的 4种结构H2 CO…CH3 CN复合物等进行几何全优化和振动频率计算 ,排除振动频率为负值的非局域极小点结构 ,并对稳定的环状构型复合物结合能进行基组重叠误差校正和零点振动能校正 .分子间相互作用的能量分解分析显示 ,静电能在H2 CO…CH3 CN相互作用能量中占主导地位 ,电荷转移能居第二位 .     

回填材料膨润土对放射性气体滞留能力模拟研究

利用各种分析手段对膨润土的物理特性进行了表征 .X射线衍射分析表明钠基膨润土呈典型的六方晶胞 ,晶胞参数是 :a轴 4 .913,c轴 5 .4 0 5 ;差热分析曲线在低温区和高温区有明显的吸热峰出现 ;元素分析钠、钾离子的含量大于钙、镁离子的含量 ,在性能上表现为钠质膨润土具有较强的离子交换能力 ;显微分析表明其表面呈皱隙状 ,测定比表面积高达 2 4 .5 2m2 /g;吸水率测定表明膨胀率大 ,说明它具有密封功能 ,可有效阻滞地下水的渗入 .利用SF6示踪技术 ,通过采集不同时间段取样池样品 ,分析样品中示踪气体浓度 ,绘制取样池示踪气体浓度随时间的变化关系曲线 ,根据费克扩散定律计算扩散系数 .实验结果表明 ,随着压实膨润土密度的增大 ,示踪气体扩散系数迅速减小 ,当密度大于 1.8g/cm3 时 ,扩散系数降至 10 -9m2 /s.研究结果表明 ,膨润土性能优化是通过在膨润土中添加适量的活性炭 ,可明显改善其对气体的阻滞能力 ;增加其对放射性气体滞留能力 ;添加少量的石英砂增加其机械性能、导热性和减少蠕变性 ,将引起对气体阻滞能力的下降 .综合考虑 ,在膨润土中各添加 5 %活性炭和石英砂 ,既对气体具有较好的滞留能力 ,又具有较好的工程特性 .