Strain induced strengthening of soft thermoplastic polyurethanes under cyclic deformation

We investigate the cyclic mechanical behavior in uniaxial tension of three different commercial thermoplastic polyurethane elastomers (TPU) often considered as a sustainable replacement for common filled elastomers. All TPU have similar hard segment contents and linear moduli but sensibly different large strain properties as shown by X-ray analysis. Despite these differences, we found a stiffening effect after conditioning in step cyclic loading which greatly differs from the common softening (also referred as Mullins effect) observed in chemically crosslinked filled rubbers. We propose that this self-reinforcement is related to the fragmentation of hard domains, naturally present in TPU, in smaller but more numerous sub-units that may act as new physical crosslinking points. The proposed stiffening mechanism is not dissimilar to the strain-induced crystallization observed in stretched natural rubber, but it presents a persistent nature. In particular, it may cause a local reinforcement where an inhomogeneous strain field is present, as is the case of a crack propagating in cyclic fatigue, providing a potential explanation for the well-known toughness and wear resistance of TPU.     

利用CCD光电测量系统测量杨氏弹性模量

提出一种测量微小伸长量的光电测量方法,即利用CCD光电测量系统将单缝衍射的光强分布转换为电信号,经过计算机处理后输出光强分布曲线,从相邻波谷读出衍射条纹间隔,通过软件的简单操作直接输出测量结果.实现了数据采集及运算结果的实时化、半自动化,并克服了传统方法的测量困难和数据处理的复杂计算.利用这一方法测定了钢丝的杨氏弹性模量,与标称值符合得较好.     

Preservation of Lipschitz constants by Bernstein type operators

Summary We obtain preservation inequalities for Lipschitz constants of higher order in simultaneous approximation processes by Bernstein type operators. From such inequalities we derive the preservation of the corresponding Lipschitz spaces.     

WEIGHTED APPROXIMATION ON SZASZ—TYPE OPERATORS

In this paper, we use weighted modules ω(?)(f,t)w to study the pointwise approximation on Szasz-type operators, and obtain the direct and converse theorem, as well as characterizations of the pointwise approximation of Jacobi-weighted Szasz-type operators.     

Amine‐cured epoxy/clay nanocomposites. II. The effect of the nanoclay aspect ratio

The thermophysical and mechanical properties of a nanocomposite material composed of amine‐cured diglycidyl ether of bisphenol A (DGEBA) reinforced with organomontmorillonite clay are reported. The storage modulus at 100 °C, which was above the glass‐transition temperature (T_g), increased approximately 350% with the addition of 10 wt % (6.0 vol %) of clay. Below the T_g, the storage modulus at 30 °C increased 50% relative to the value of unfilled epoxy. It was determined that the T_g linearly increased as a function of clay volume percent. The tensile modulus of epoxy at room temperature increased approximately 50% with the addition of 10 wt % of clay. The reinforcing effect of the organoclay nanoplatelets is discussed with respect to the Tandon–Weng and Halpin–Tsai models. A pseudoinclusion model is proposed to describe the behavior of randomly oriented, uniformly dispersed platelets in nanocomposite materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4391–4400, 2004     

The continuity of superposition operators on some sequence spaces defined by moduli

Let λ and μ be solid sequence spaces. For a sequence of modulus functions Φ = (ϕ k) let λ(Φ) = {x = (x _k ): (ϕk(|x _k |)) ∈ λ}. Given another sequence of modulus functions Ψ = (ψ_k), we characterize the continuity of the superposition operators P _f from λ(Φ) into μ (Ψ) for some Banach sequence spaces λ and μ under the assumptions that the moduli ϕk (k ∈ ℕ) are unbounded and the topologies on the sequence spaces λ(Φ) and μ(Ψ) are given by certain F-norms. As applications we consider superposition operators on some multiplier sequence spaces of Maddox type. This research was supported by Estonian Science Foundation Grant 5376.     

推广的Kantorovich算子在Ba空间中的逼近

利用Ditzian-Totik光滑模,研究了推广的Kantorovich算子在Ba空间中的逼近,得到逼近的正定理与等价定理.所得结果改进、推广和统一了一些作者的结果.     

Representation surfaces of Young''s modulus and Poisson''s ratio for BCC transition metals

 The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l) along an arbitrary direction [h k l] are given for cubic crystals. The representation surfaces, for which the length of the radius vector in the [h k l] direction equals to E(h k l) or υ(h k l), are constructed for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic, both representation surfaces of Young's modulus and Poisson's ratio are spherical surfaces. The remaining BCC transition metals may be grouped into two classes. In the first group (Cr, Mo, Nb and V) with negative values of s_A, Young's modulus surface has eight depressed corners and six rounded protuberances at the centers of the faces. In the second group (Fe and Ta) with positive values of s_A, on the contrary, Young's modulus surface has eight rounded protuberance corners and six depressions at the centers of the faces. The contrary conclusions are obtained for Poisson's ratio.     

Viscoelastic properties of nanostructured natural rubber/polystyrene interpenetrating polymer networks

The effects of the blend ratio and initiating system on the viscoelastic properties of nanostructured natural rubber/polystyrene‐based interpenetrating polymer networks (IPNs) were investigated in the temperature range of ?80 to 150 °C. The studies were carried out at different frequencies (100, 50, 10, 1, and 0.1 Hz), and their effects on the damping and storage and loss moduli were analyzed. In all cases, tan δ and the storage and loss moduli showed two distinct transitions corresponding to natural rubber and polystyrene phases, which indicated that the system was not miscible on the molecular level. However, a slight inward shift was observed in the IPNs, with respect to the glass‐transition temperatures (T_g's) of the virgin polymers, showing a certain degree of miscibility or intermixing between the two phases. When the frequency increased from 0.1 to 100 Hz, the T_g values showed a positive shift in all cases. In a comparison of the three initiating systems (dicumyl peroxide, benzoyl peroxide, and azobisisobutyronitrile), the dicumyl peroxide system showed the highest modulus. The morphology of the IPNs was analyzed with transmission electron microscopy. The micrographs indicated that the system was nanostructured. An attempt was made to relate the viscoelastic behavior to the morphology of the IPNs. Various models, such as the series, parallel, Halpin–Tsai, Kerner, Coran, Takayanagi, and Davies models, were used to model the viscoelastic data. The area under the linear loss modulus curve was larger than that obtained by group contribution analysis; this showed that the damping was influenced by the phase morphology, dual‐phase continuity, and crosslinking of the phases. Finally, the homogeneity of the system was further evaluated with Cole–Cole analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1680–1696, 2003     

Stancu-Sikkema算子的点态估计

本文构造了Stancu—Sikkema算子,并利用点态光滑模研究了此算子的点态逼近正逆定理.