Multiporous hollow polymer particles

Hollow particles with interconnected cavities have been prepared by a simple modified suspension polymerization of acrylate monomers in the incorporation of a phase inversion process and polymerizable emulsifier. The morphology of particles has been characterized by scanning electron micrographs (SEMs). Based on observations made using an optical microscope equipped with a digital camera and SEM images of particles obtained under different conditions, the formation mechanisms for multiporous hollow particles are discussed.     

新型固液双重致孔球形离子交换剂的制备及其性能研究

以甲基丙烯酸缩水甘油酯为单体 ,采用固液联合致孔方式 ,通过一步悬浮聚合制备了一种新型双孔高分子球形载体 .经化学修饰后 ,得到含二乙胺羟丙基的阴离子交换剂 (介质A) .优化了制备条件 .并与用相同方法制备的但仅含有机溶剂致孔剂的介质B进行了比较 .介质A和B均具有较高的静态吸附容量和机械强度 .由于介质A内含有流动相可以对流通过的大孔 ,因此其动态吸附容量远高于介质B ,并且在较高的流速下表现出较好的色谱流动性能     

甲基丙烯酸甲酯悬浮聚合实验教学的改进

选用氢氧化镁为分散剂,甲基丙烯酸甲酯(MMA)为单体,进行悬浮聚合反应,研究了分散剂用量、引发剂用量、水和单体比、搅拌速度、反应温度及反应时间对聚合物珠粒大小、均匀程度和产率的影响。结果表明:与目前高分子实验教材普遍选用的以聚乙烯醇(PVA)为分散剂的悬浮聚合反应相比,以氢氧化镁为分散剂,具有操作简单、聚合时间短、体系稳定性高等优点,可代替原有的悬浮聚合反应实验,作为高分子化学实验的教学课程内容。     

AN/St悬浮共聚体系中AN在水/油两相间分配及其对共聚物组成的影响

研究了丙烯腈/苯乙烯(AN/St)悬浮共聚体系中AN在水/油两相间的分配及其对AN/St共聚物组成的影响.结果表明,AN分配于水/油两相间,使油相AN的含量低于相同单体配料比的本体聚合,导致生成的AN/St共聚物组成偏离本体共聚.为了准确预测进而控制AN/St悬浮共聚物的组成,提出了在考虑AN相分配的基础上计算AN/St悬浮共聚物组成的模型.计算结果与实验值一致,计算中用到的油相实际竞聚率与本体聚合相同,但该悬浮聚合的表观竞聚率随水/油比的变化而发生较大改变.     

高阻隔材料——偏氯乙烯悬浮共聚树脂

本文介绍偏氯乙烯悬浮共聚树脂的优异阻隔性能、合成配方与工艺。     

Studies on Colloidal Properties of Mixed Metal Hydroxide－Clay Aqueous Suspension

ＳｔｕｄｉｅｓｏｎＣｏｌｌｏｉｄａｌＰｒｏｐｅｒｔｉｅｓｏｆＭｉｘｅｄＭｅｔａｌＨｙｄｒｏｘｉｄｅ－ＣｌａｙＡｑｕｅｏｕｓＳｕｓｐｅｎｓｉｏｎＮＯＵｗａｎ－ｇｕｏ；ＺＨＡＮＧＣｈｕｎ－ｇｕａｎｇ；ＳＵＮＤｅ－ｊｕｎ；ＨＡＮＳｈｕ－ｈｕａａｎｄＷＡＮＧ...     

配糖蛋白B肠溶微胶囊的研究

采用双乳液法研制配糖蛋白Ｂ的肠溶微胶囊，考察了微胶囊的形态、粒径及其分布，在摸拟肠液的缓冲液中进行溶解释放试验。配制了两种口服微胶囊混悬制剂，并考察了它的稳定性。     

丙烯腈的悬浮聚合

<正> 适用于普通溶液纺丝加工成形的聚丙烯腈(PAN)的分子量一般在5—8万范围内,近年来发展起来的冻胶纺丝方法使得(?)>4.0×10~5的超高分子量PAN也可以纺丝成形,成为制备高强高模PAN纤缎的有效方法之一。随着PAN材料应用领域的开拓,合成超高分子量的PAN是一个首要解决的问题。     

N-Heterocyclic carbene-palladium complex on polystyrene resin surface as polymer-supported catalyst and its application in Suzuki cross-coupling reaction

A poly(imidazoliummethyl styrene)-surface grafted-polystyrene resin was prepared by suspension polymerization. This was used as the polymer-supported carbene precursor for the palladium complex, which efficiently catalyzed the Suzuki cross-coupling of aryl halides and phenylboronic acid.     

ELECTRORHEOLOGICAL PROPERTIES OF POLYANILINE/PUMICE COMPOSITE SUSPENSIONS

Electrorheological （ER） properties of polyaniline （PAni）, pumice and polyaniline/pumice composites （PAPC） were investigated. Polyaniline and PAni/pumice composite were prepared by oxidative polymerization. PAni/pumice particlesbased ER suspensions were prepared in silicone oil （SO）, and their ER behavior was investigated as a function of shear rate, electric field strength, concentration and temperature. Sedimentation stabilities of suspensions were determined. It has been found that ER activity of all the suspensions increases with increasing electric field strength, concentration and decreasing shear rate. It has shown that the suspensions have a typical shear thinning non-Newtonian viscoelastic behavior. Yield stress of composite suspensions increased linearly with increasing applied electric field strength and with concentrations of the particles. The effect of high temperature on ER activity of purrfice/silicone oil systems was also investigated.