In situ observations of domain wall motion in Mn–Zn and Ni–Zn ferrites by Lorentz microscopy and electron holography

Domain wall motion in Mn–Zn and Ni–Zn ferrites with applied magnetic fields is investigated by in situ observations with Lorentz microscopy and electron holography. It is found that both Mn–Zn and Ni–Zn ferrites have a mean grain size of approximately 10 μm and several pores with sizes ranging from 0.2 to 1.1 μm. In situ observations by Lorentz microscopy with an applied magnetic field reveals that in Mn–Zn ferrite, the domain walls move easily across the grain boundary, while in Ni–Zn ferrite, the domain walls move along the grain boundary but are pinned at the grain boundary and pores. From in situ observations of Ni–Zn ferrite by electron holography, it is clarified that domain wall pinning at the grain boundary retards a sensitive increase in magnetic flux parallel to the applied field direction, which is considered to result in high hysteresis loss.     

Feedback stabilization of snap-through buckling in a preloaded two-bar linkage with hysteresis

We study a linearly damped preloaded two-bar linkage that exhibits hysteresis due to the presence of multiple attracting equilibria. The dynamics at the unstable equilibrium, through which a snap-through buckle occurs, are not linearizable due to a solution-dependent singularity. We stabilize the unstable equilibrium using two distinct non-linear controllers. The feedback-linearization controller requires knowledge of the linkage parameters, whereas the robust version of the intrinsic non-linear proportional-derivative controller requires only an upper bound on the stiffness.     

Electro-optical performance of polymer stabilized cholesteric texture cell: The influence of chiral dopant and monomer concentration

Reverse-mode polymer stabilized cholesteric texture (PSCT) cells with various chiral dopant and monomer concentrations were fabricated. Experimental results indicate that the chiral dopant concentration and the monomer concentration significantly influence the threshold voltage and hysteresis of the cells. The chiral dopant and monomer deform the hysteresis loop. Increasing the monomer concentration reduces the width of the hysteresis loop of the reverse-mode PSCT cell.     

Surface free energy of a solid from contact angle hysteresis

Nature of contact angle hysteresis is discussed basing on the literature data (Colloids Surf. A 189 (2001) 265) of dynamic advancing and receding contact angles of n-alkanes and n-alcohols on a very smooth surface of 1,1,2,-trichloro-1,2,2,-trifluoroethane (FC-732) film deposited on a silicon plate. The authors considered the liquid absorption and/or retention (swelling) processes responsible for the observed hysteresis. In this paper hysteresis is considered to be due to the liquid film left behind the drop during retreating of its contact line. Using the contact angle hysteresis an approach is suggested for evaluation of the solid surface free energy. Molecular spacing and the film structure are discussed to explain the difference in n-alkanes and n-alcohols behaviour as well as to explain the difference between dispersion free energy gamma(s)(d) and total surface free energy gamma(s)(tot) of FC-732, as determined from the advancing contact angles and the hysteresis, respectively.     

气固吸附等温线的研究进展

综述了近些年来在气固吸附理论研究领域对吸附等温线的研究进展。论述了从早期的BDDT的5种类型吸附等温线，到IUPAC的6种类型吸附等温线，再到基于Ono-kondo晶格模型的Gibbs吸附分类的5种类型吸附等温线．讨论了与各种类型吸附等温线类型相对应的吸附机理，并对滞留回环现象进行了解释和分析。     

Langevin dynamic simulation of hysteresis in a field-swept Landau potential

Numerical simulations are done of Langevin dynamics for a uniform-orderparameter, field-swept Landau model,= –|a/2|m ²+|b/4|m ⁴–mh(t) , to study hysteresis effects. The field is swept at a constant rateh(t)=h(0)+ht. The stochastic jump values of the field {h_J from an initially prepared metastable minimumm(0) are recorded, on passage to a global minimum m(). The results are: (a) The mean jump¯h _J(h) increases (hysteresis loop widens) with h, confirming a previous theoretical criterion based on rate competition between field-sweep and inverse mean first-passage time (FPT); (b) The broad jump distribution(h _J,h) is related to intrinsically large FPT fluctuations ( ²–²)/ ² O(1), and can be quantitatively understood. Possible experimental tests of the ideas are indicated.     

The physical properties of pressure sensitive rubber composites

Nitrile butadiene rubber, NBR, structural foam of different apparent densities was obtained by using different concentrations of foaming agent, azodicarbonamide, ADC/K. The true stress-strain characteristics, in case of compression, of foamed samples after the application of cyclic stress-strain were measured. The effect of the cyclic stress-strain on strain energy density of ADC/K foaming agent-filled NBR rubber composites was studied. The mechanical parameters were found to depend on the foaming agent concentration and on the pre-cyclic fatigue number. Results also indicated that the strain energy decreased with filler concentration.The effects of the cyclic stress-strain on the conductivity of ADC/K foaming agent-filled NBR rubber composites were studied. The electrical properties were found to depend on the foaming agent concentration, the strain amplitude and the number of stress-strain cycles of pre-strain. This study was assisted by the current-voltage characteristics which were measured under the effect of different compression ratios: 0%, 5%, 10%, 15%, 20%, 25% and 30%. The free current carrier mobility and the equilibrium concentration of charge carriers in the conduction band were produced as functions of compressive strain. Results also indicate that there is a linear variation between pressure and conductivity for all samples, which means that these samples can be used as a pressure sensor.     

A mathematical model for the admission process in intensive care units

A mathematical model is given for the admission process in Intensive Care Units (ICUs). It is shown that the model exhibits bistability for certain values of its parameters. In particular, it is observed that in a two-dimensional parameter space, two saddle-node bifurcation curves terminate at a single point of the cusp bifurcation, creating an enclosed region in which the model has one unstable and two stable states. It is shown that in the presence of bistability, variations in the value of parameters may lead to undesired outcomes in the admission process as the value of state variables abruptly changes. Using numerical simulations, it is also discussed how such outcomes can be avoided by appropriately adjusting the parameter values.