喷雾干燥-固相煅烧法制备球形钛酸狸负极材料的研究

通过喷雾干燥-固相煅烧法制备了球形钛酸钾.不同于传统喷雾干燥工艺采用固态钛源进行制备,本文采用的前驱体是钾盐,分散剂和钛酸四丁酯制备出的硝酸氧钛的混合溶液.由于制备方法中前驱体为原子级均匀分布,化学计量比可精确控制,制备出的材料颗粒细小,粒径、成分分布均匀,电化学性能优异.同时研究了不同钾钛摩尔比以及煅烧温度对球形钛酸钾的形貌和成分的影响,并研究了其作为钾离子电池电极材料的电化学性能.结果表明,钾钛摩尔比为0.816,煅烧温度为 800 ℃时钛酸钾的电化学性能最好,首圈容量 185.1 mAh/g,30 圈后容量为173.9 mAh/g,循环100圈后还有169.7 mAh/g的容量.     

Global Chaos Synchronization between Two New Different Chaotic Systems via Active Control

We present chaos synchronization between two new different chaotic systems by using active control. The proposed controller ensures that the states of the controlled chaotic response system asymptotically synchronizes the states of the drive system. Numerical simulations are shown to verify the result.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Acoustic scattering from multiple spheres by using a kind of addition formulae for the spherical wave functions

A kind of addition formulae for the spherical wave functions is generated by using the bicentric expansion of Green function in spherical coordinates. For an acoustical system with multiple spheres, the addition formulae permit the field expansions all referred to the center of one of the spheres, whose boundary conditions can be consequently used to study the multiple scattering easily. The two-sphere acoustical system with different boundary conditions is considered and the field scattered by each sphere can be obtained by solving an infinite set of two linear, complex, algebraic equations, whose coefficients are coupled through double sums in the spherical wave functions. Finally, the form functions of two spheres insonified by a plane wave at arbitrary angles of incidence are calculated and the addition formulae presented are validated by comparing the corresponding numerical results with those of the existing literature.     

GLOBAL WEAK SOLUTIONS OF THE RELATIVISTIC VLASOV-KLEIN-GORDON SYSTEM IN TWO DIMENSIONS

In this paper we consider the system of classical particles coupled with a Klein-Gordon field in two dimensions.We establish a-priori-bounds on the solutions of this system with initial data satisfying a size restriction derived from conservation of energy.This result,together with the smoothing of"velocity averaging",yields the existence of global weak solutions to the corresponding restricted initial value problem.The size restriction is necessary since energy of the system is indefinite.Finally,we show that the weak solutions preserve the total mass.     

PERMANENCE AND GLOBAL STABILITY TO A NONAUTONOMOUS NONLINEAR DISCRETE SINGLE SPECIES SYSTEM

In this paper,we study some permanence and global stability to a nonau- tonomous nonlinear discrete single species system,and obtain some sufficient condition of global stability to the system.     

混凝土靶球形腔膨胀侵彻模型应用

Bishop等人于1945年开始用解析方法研究侵彻机理，导出了柱形腔和球形腔的准静态v膨胀方程，后来这种方法被称为空腔膨胀理论。目前，空腔膨胀理论已经在多种不同材料靶的侵彻研究中获得较为普遍的应用。Forrestal等人于1997年提出了一个适用于混凝土材料靶的球对称空腔膨胀侵彻模型，模型对靶结构的描述是将其压力与体积应变的关系理想化为不可压或线性可压，而将剪切强度与压力的关系理想化为由一拉伸阈值表示的Mohr-Coulomb准则。     

微型网状结构支架的力学性能研究

冠状动脉支架为圆柱形微型网状结构，直径1mm，厚度0．1mm，长度10～16mm。在经皮冠状动脉介入PCI治疗中由球囊充气撑开到直径为2．5～3．5mm的支架，在血管内承受血管壁回弹压力。为了保持血液流通支架必须保持其几何圆形。这是一个结构弹塑性稳定性问题。但是目前国际上对于支架的力学性能质量指标主要以强度性能评定而不涉及支架屈曲性能是不妥的。本文对于支架的强度和屈曲性能进行了全面的理论分析和实验研究，自行研制了智能式电子检测仪成功地对微型网状结构支架的强度和屈曲性能实现了实测实验研究。由于微型支架的离散型网状结构的特点，在实验中出现一些特殊的屈曲现象。本文研究结果对于支架的形状与性能设计的改进和力学性能质量标准规范的制订具有重要意义。     

ICF研究中的Rayleigh-Taylor不稳定性实验用靶

 概述了当前研究Rayleigh-Taylor不稳定性增长实验所用的靶型情况。从实验用靶来看，调制靶的设计正从平面向立体发展，出现了球形和柱形等新靶形，制备手段包括精密机械微加工、激光束、电子束和离子束加工、半导体工艺和微米纳米技术加工等。根据对国外新靶型的研究，结合国内工艺条件和实验需求，对国内可能采用的靶型进行了研究探索。     

SURFACE METALLIZATION OF CENOSPHERES AND PRECIPITATORS BY ELECTROLESS PLATING

This paper reports the use of a colloidal Pd^0 catalysis system to metallize the surface of precipitators separated from coal fly-ash, and metals such as Cu, Ni etc. are deposited on the precipitators surface. Alternatively, according to the characteristic surface of cenospheres, an Ag coating catalysis system is adopted to first deposit Ag on the cenospheres surface, followed, if necessary, by the deposition of other metals such as Cu, Ni, etc. on the Ag coating to produce monolayer and multilayer metal-coated cenospheres. The surface characteristics and the morphologies of the metal coatings are examined in detail with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS) techniques. It can be shown that the quality of metal coatings derived from the Aa coatina catalysis system, is better than that of the colloidal Pd^0 catalysis system.