Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…     

Approaches to improving critical current density of YBCO superconducting thick films deposited by electrophoresis

The irreversibility field (Hirr) of Y-based superconductor is much higher than that of Bi-based superconductor. Y-based superconductor is capable of maintaining stable electrical currents in high magnetic field and electric field, so it is a better suited mate-rial for electric-current applications. Commonly, the Y-based tapes comprise a YBCO thick film deposited on a flexible substrate, typically with an intermediate buffer layer, and an overcoat of noble metal. In this process, the interm…     

Vortex lattice mobility and effective pinning potentials in the peak effect region in YBCO crystals

The peak effect (PE) in the critical current density in both low and high temperature superconductors has been the subject of a large amount of experimental and theoretical work in the last few/several years. In the case of YBCO, crucial discussions describing a dynamic or a static picture are not settled. In that region of field and temperature the mobility of the vortex lattice (VL) is found to be dependent on the dynamical history. Recently we reported evidence that the VL reorganizes and accesses to robust VL configurations (VLCs) with different effective pinning potential wells arising in response to different system histories. One of the keys to understand the nature of the PE is to investigate the VL behavior in the vicinity of the various VLCs in the region of the PE. The stability of these VLCs was investigated and it was found that they have distinct characteristic relaxation times, which may be related to elastic or plastic creep processes. In this paper we review some of these results and propose a scenario to describe the PE in YBCO crystals.     

Spectroscopic and X-ray diffraction study of high Tc epitaxial YBCO thin films obtained by pulsed laser deposition

We report spectroscopic characterization of epitaxial YBCO thin films grown on LaAlO₃ by pulsed laser deposition. Raman spectroscopy and spectroscopic ellipsometry were used for film characterization and the results were correlated with X-ray diffraction measurements. The mentioned techniques allowed us to analyze crystallographic, micro-structural, and morphological properties of YBCO thin films. We also demonstrated that relatively low resolution Raman spectroscopy and spectroscopic ellipsometry are reliable techniques for a rapid and non-destructive characterization of epitaxial YBCO thin films.     

High temperature superconducting thin films for microwave filters

YBa₂Cu₃O_7-δ and Tl₂Ba₂CaCu₂O₈ thin films for microwave filters were synthesized by pulsed laser deposition and the two-step thalliation process. Substrate quality requirements and the relation of thin film morphology, microstructure with microwave surface resistance were discussed.     

用电泳技术制备YBCO高温超导厚膜

介绍了电泳技术制备YBCO高温超导厚膜的实验方法和YBCO高温超导厚膜的电学性质测量 ,讨论了在学生小型科研实验或设计实验中开展此实验的学时安排、注意事项和实验内容的扩展 .     

TDPAC studies of Hf doped YBCO

Time differential perturbed angular correlation measurements of the 133–482 keVγ-γ cascade of¹⁸¹Ta in Hf-doped YBa₂Cu₃O_7−x are presented. The¹⁸¹Hf precurser nuclei are incorporated into the sample by thermal neutron irradiation. Two quadrupole interaction frequencies are observed in the as-irradiated sample:v _Q1=161±10 MHz with intensityf ₁=75%, asymmetry parameterη ₁=0.32 and damping parameter Λ₁=0.42, andv _Q2=1108±40 MHz withf ₂=25%,η ₂=0.62, and Λ₂=0.60. On annealing the sample in air at various temperaturesT _a and quenching to room temperature,f ₁ remained nearly constant forT _a<600°C andv _Q1 for all annealing temperatures indicating that these are insensitive to oxygen stoichiometry. This frequency is interpreted to be due to¹⁸¹Hf substitutingY sites. BeyondT _a=600°C,f ₁ increased and reached a constant value of 90% forT _a=800°C. The value ofv _Q2 showed a slight variation between 1086 and 1160 MHz, whilef ₂ remained nearly constant at 25% forT _a<600°C. This component is identified to be due to¹⁸¹Hf substituting Cu 1 sites in the Cu-O chains of YBCO. Above 600°Cv _Q2 decreased and reached a value of 808 MHz beyond 750°C.     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.     

金属基上以YSZ为过渡层的YBCO薄膜的微观结构

采用透射电子显微术（ＴＥＭ），研究了用磁控溅射技术在柔性金属基体上制备的、钇稳定的ＺｒＯ２（ＹＳＺ）为过镀层的ＹＢａ２Ｃｕ３Ｏ７－ｙ（ＹＢＣＯ）薄膜的横断面结构。所得ＹＢＣＯ膜的超导临界转变温度Ｔｃ为９１Ｋ，临界电流密度Ｊｃ＝２×１０３Ａ／ｃｍ２（７７Ｋ，０Ｔ）。基体为Ｎｉ基合金（ＨａｓｔｅｌｏｙＣ）。ＹＳＺ层为致密、均匀的细晶组织，约１２μｍ厚，具有织构取向，并与基体紧密连接。ＹＢＣＯ层的厚度不均匀，约５００ｎｍ；ＹＢＣＯ／ＹＳＺ界面有时连接较差，在该界面上有杂质出现，杂质有可能引发裂纹。     

Superconductivity in Sr<Subscript>0.75</Subscript>Y<Subscript>0.75</Subscript>Ba<Subscript>1.5</Subscript>Cu<Subscript>3</Subscript> O<Subscript>7−<Emphasis Type="Italic">d</Emphasis></Subscript> compounds

The effect of simultaneous Sr substitution at the Ba and Y sites has been studied in the Sr_0.75Y_0.75Ba_1.5Cu₃O_7–dsystem. Attempts to replace 25% Y and 25% Ba have been successful and superconductivity was observed above 78 K for Sr_0.75Y_0.75Ba_1.5Cu₃O_7–d compound with high oxygen content, i.e., O_6.76, and having orthorhombic crystal symmetry. The compound was treated in argon gas at 800°C to reduce the oxygen content and to induce some structural changes. The Sr_0.75Y_0.75Ba_1.5Cu₃O_6.1 compound thus obtained has tetragonal symmetry and low oxygen content, O_6.1. It has also shown superconductivity at 28 K. The paper presents a careful comparison of the structural and electrical properties and infrared absorbance spectra of the two compounds with the same metallic composition, Sr_0.75Y_0.75Ba_1.5Cu₃, but with different oxygen content and crystal symmetry. The study clearly establishes the occurrence of superconductivity in tetragonal Sr-substituted (both at Y and Ba sites in) YBCO.