Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

Separation and determination of metals as complexes of 1-nitroso-2-naphthol-6-sulphonic and 2-nitroso-1-naphthol-6-sulphonic acids

A sensitive ion-pair liquid-liquid extraction-spectrophotometric method has been developed for the determination of copper, palladium, iron and cobalt, based on the formation of metal complexes with 1-nitroso-2-naphthol-6-sulphonic acid or 2-nitroso-1-naphthol-6-sulphonic acid as primary ligand, and zephiramine as counter-ion. The coloured metal complexes obtained over different pH ranges are easily and quantitatively extracted into dichloromethane. The method has been tested with samples containing known amounts of copper, palladium, iron and cobalt in ultrapure water. The reagents provide a sensitive spectrophotometric method for determining these metals.     

3,5-diBr-DMPAP直接光度法测定葡萄糖酸锌含量

为建立一种快速、简便、灵敏测定葡萄糖酸锌含量的方法,在非离子型表面活性剂聚氧乙烯异辛基苯基醚(TritonX-100)存在下,用2-(3,5-二溴-2-吡啶偶氮)-5-二甲氨基酚(3,5-diBr-DM-PAP)作显色剂,直接光度法测定了葡萄糖酸锌。结果表明,该法显色络合物最大吸收波长为560 nm,线性范围为0~1.5μg.mL-1,表观摩尔吸光系数为1.10×105L.mol-1.cm-1,回收率为98.7%~102.2%,具有操作快速、简便,结果灵敏可靠等优点,应用该法直接测定补锌口服液葡萄糖酸锌含量,结果满意。     

Spectrophotometric Study of the Complexation of Some Lanthanide (III) Ions with a Series of 18-Crowns-6 in DMSO Solution Using Murexide as a Metallochromic Indicator

The complexation of La(III), Ce(III), Pr(III) and Er(III) with 18-crown-6(18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DCY18C6) anddibenzopyridino-18-crown-6 (DBPY18C6) has been studied in dimethylsulfoxide(DMSO) by means of a competitive spectrophotometric method using murexide asa metal ion indicator. The formation constants of the 1 : 1 complexeswere found tovary in the order La(III) > Ce(III) > Pr(III) > Er(III). It was foundthat the structure influences the formation and stability of the resultingcomplexes. The effects ofvarious parameters on complexation are discussed. The order of the stabilityconstants of each lanthanide ion with these macrocycles are18C6 > DC18C6 > DB18C6 > DBPY18C6.     

Simultaneous Spectrophotometric Determination of Group B Vitamins Using Parallel Factor Analysis: PARAFAC

In this work, a simple and rapid analytical procedure was applied for simultaneous determination of folic acid (vitamin B₀), thiamin (vitamin B₁), riboflavin (vitamin B₂) and pyridoxal (vitamin B₆) based on the absorbance data in the pH range 2.0‐12.0 at 25 °C using parallel factor analysis (PARAFAC). The effect of the pH as the most important factor on the sensitivity of the determination was studied. The spectral data were recorded in 400‐650 nm intervals and a 2‐12 pH range for all four vitamins. The calibration set was constructed in the concentration ranges of 4‐22, 1‐20, 6‐26, and 4‐20 μg mL^?;1 for B₆,B₂,B₁ and B₀, respectively. The root mean squares errors of prediction for the prediction set, (RMSEP), are 0.65, 0.63, 1.13 and 0.34 for B₀,B₁,B₂ and B₆, respectively. The recovery percent for the validation set are in the range of 90.6 to 107.0%. The effect of the experimental conditions and diverse species were discussed. The optimum values of these factors were searched according to the relative standard deviation of the prediction set of mixtures solutions.     

O. Carboxyphenylhydrazoethylacetoacetate as an Analytical Reagent for the Determination of Cu(II) and Co(II) in Complex Materials

An extraction‐spectrophotometric method for the determination of trace amounts of copper and cobalt based on their extraction into n‐pentanol with 0. carboxyphenylhydrazoethylacetoacetate (O.CPHEAA) was per formed. Copper was extracted from pH 6.0 – 8.0 and ionic strength 0.5 M – KCl. The maximum absorption of the extracted Cu(II) ‐ O.CPHEAA complex (1:1 & 1:2 species) occurs at 415 nm. The proposed method succeeded in as saying a concentration of 3–63 μg per 10 mL of n‐pentanol (? = 1.25 × 10⁴L mol^?1 cm^?1). The method failed to ex tract cobalt ion into various organic sol vents over a pH range of 2–11. The suggested method is highly selective and sensitive according to a wide scheme of interference studied. Copper in some plant samples was accurately estimated using the suggested method. The obtained results and the results of the AAS method were consistent. The reproducibility test shows a relative standard deviation of 1%. Sandell sensitivity for A = 0.001 is 5 × 10^?3 μg cm^?2.     

比值光谱导数法同时测定铝合金中铁,铜,锌

用比值光谱－导数分光光度法，在ｐＨ５．５缓冲溶液中，利用金属－２－（５－溴－２－吡啶偶氮）－５－二乙氨基酚（５－Ｂｒ－ＰＡＤＡＰ）－ＯＰ三元络合物显色体系，对混合物中铁，铜，锌三组分进行了同时测定。合成试样５次测定回收率在９７．３％－１０４．４％之间。应用于铝合金中铁，铜，锌的测定，各６次测定的ＲＳＤ分别为３．６６％，１．３８％，２．０３％。     

2-(8-羟基喹啉-5-磺酸-7-偶氮)-1,8-二羟基-3,6-萘二磺酸与牛血清白蛋白的相互作用

用平衡透析法和分光光度法研究了 2 (8 羟基喹啉 5 磺酸 7 偶氮 ) 1,8 二羟基 3,6 萘二磺酸与牛血清白蛋白 (BSA)在酸性溶液中的结合反应 ,认为 8Q5SAC与BSA之间的结合力是以静电引力为主的非共键作用力 ,并探讨了其结合模型。在 2 98K下 ,测得这一反应的最大结合数为 35～ 40 ,结合常数为 6 .1× 10 5L mol。还研究了溶液基本条件如酸度和离子强度等对 8Q5SAC与牛血清白蛋白分子复合物形成的影响 ,在pH =3.34条件下 ,标准工作曲线的线性范围为 0 .2 0～ 46 .90mg L。     

Some observations on the automation by flow injection analysis of the spectrophotometric determination of amino acids and proteins witho-phthalaldehyde

Automation by flow injection analysis with Spectrophotometric detection of the determination of total amino acids and proteins witho-phthalaldehyde is not straightforward. The use of spectrophotometry, instead of spectrofluorimetry, and of N-acetyl-L-cysteine, instead of the conventional mercaptoethanol is advantageous because of the lower variability of absorptivities with respect to fluorescence yields, and the larger stability of the derivatives. Under adequate working conditions and with leucine as reference, the procedure can be used for the evaluation of total amino acids. A similar procedure is proposed for the analysis of proteins in a sample. Limits of detection are 1 × 10^–5 M for amino acids, and 1 × 10^–6 M for proteins, respectively.     

铝与溴代二甲氨基苯基荧光酮的多元配合物的光度研究

本文研究了在表面活性剂存在性，铝与溴代二甲氨基苯基荧光酮的显色反应。在弱酸性介质中，Ａｌ＾３＋ＢＤＭＡＦ－ＣＴＭＡＢ三元配合物在水浴加热至７０℃－８０℃时形成，其最大吸收波长为５７７ｎｍ，Ａｌ＾３＋：ＢＤＭＡＦ＝１：２，表观摩尔吸光系数为１．３４×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，表观稳定常数为７．４×１０＾５。在ＰＨ９．５－１０．５的氨性缓冲介质中，Ａｌ＾３＋－Ｆ＾－－ＢＤＭＡＦ－非离子表面