高温超导体Josephson阵列在磁场中的微波响应与磁通涡旋激发

本文从分析相变电阻率 ρP 和磁通蠕动电阻率 ρF 出发 ,指出当T小于某一温度T0 时 ,ρF>ρP,而当T >T0 时 ,ρF 远小于 ρP,并进一步分析了 ρF 与 ρP 随温度的变化率分布图 ,得出磁通蠕动电阻率 ρF 随温度的变化率分布图跟微波响应曲线具有相似的分布特征 ,结果表明 :高温超导体的非平衡微波响应机制可能与磁通涡旋的激发有关 .     

640 × 512 pixel narrow-band, four-band, and broad-band quantum well infrared photodetector focal plane arrays

A 9 μm cutoff 640 × 512 pixel hand-held quantum well infrared photodetector (QWIP) camera has been demonstrated with excellent imagery. A noise equivalent differential temperature (NEDT) of 10.6 mK is expected at a 65 K operating temperature with f/2 optics at a 300 K background. This focal plane array has shown background limited performance at a 72 K operating temperature with the same optics and background conditions. In this paper, we discuss the development of this very sensitive long-wavelength infrared camera based on a GaAs/AlGaAs QWIP focal plane array and its performance in quantum efficiency, NEDT, uniformity, and operability. In the second section of this paper, we discuss the first demonstration of a monolithic spatially separated four-band 640 × 512 pixel QWIP focal plane array and its performance. The four spectral bands cover 4–5.5, 8.5–10, 10–12, and 13.5–15 μm spectral regions with 640 × 128 pixels in each band. In the last section, we discuss the array performance of a 640 × 512 pixel broad-band (10–16 μm full-width at half-maximum) QWIP focal plane.     

Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

彩色表面等离子体共振成像初探

自主设计并建立了彩色表面等离子共振成像(Color SPRI, CSPRI)实验系统, 并结合利用自己编制的软件开展了相关研究, 成功地观测到溶液和蛋白点阵的彩色图像. 这些结果显示, CSPRI有可能成为生物分子微点阵(或生物芯片)的一种新型的彩色显示手段.     

Voltammetric Characterization of Micro‐ and Submicrometer‐Electrode Arrays of Conical Shape for Electroanalytical Use

Densely packed micro‐ and submicrometer electrode arrays of platinum and gold (the nominal number, N, of electrodes in each array varies between 225 and 3600) are fabricated by photolithographic technique and vapor deposition processes of metal films. The electrodes are conical‐shaped and only their apexes are exposed to the electrolytic solution. The electrode arrays are characterized electrochemically in Ru(NH₃)₆Cl₃ aqueous solutions by using cyclic voltammetry at low scan rates, to establish the number of electrochemically active electrodes (N_ac) in each array; the geometric characterization is performed by scanning electron microscopy. All the investigated arrays provide steady‐state voltammograms, indicating diffusionally independent behavior of each microelectrode. The number of microelectrodes that are active in the fabricated arrays depends on microelectrode density. In particular, for the arrays with N=3600 and N=225, the fraction of active sites is about 45% and 90%, respectively. The analytical performance of some of the Pt version of the arrays is tested in hydrogen peroxide solutions, allowing verifying that linear calibration plots over the concentration range (0.1–20 mM) are obtained. This dynamic range is larger than that typically recorded at smooth polycrystalline platinum electrodes (0.5–5 mM), and the better performance is attributed to both the higher aspect ratio of the cone geometry and the higher mass transport associated to each microelectrode of the array. Reproducibility (within 3.5%, r.s.d.) and long‐term stability (within 5%, r.s.d., after 8 h continuous use) of the electrode systems are satisfactory. A low detection limit, based on the signal to noise ratio equal to 3, of 0.05 mM is found, which is adequate for a rapid monitoring of H₂O₂ in real samples and industrial processes.     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

水热法制备Sb2S3纳米棒有序阵列

以Sb(S₂CNEt₂)₃为单源前驱体，通过改变时间、温度、表面活性剂等反应条件，用水热法成功合成了各种尺寸的Sb₂S₃纳米棒及其有序阵列。X-射线衍射(XRD)、能量分散光谱(EDS)以及选区电子衍射(SAED)研究表明纳米棒由正交晶系Sb₂S₃单晶构成。扫描电子显微镜(SEM)和透射电子显微镜(TEM)研究显示Sb₂S     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Carbon Nanotubes Based Nanoelectrode Arrays: Fabrication,Evaluation, and Application in Voltammetric Analysis

Fabrication, electrochemical characterization, and applications of low‐site density carbon nanotubes based nanoelectrode arrays (CNTs‐NEAs) are reported in this work. Spin‐coating of an epoxy resin provides a new way to create the electrode passivation layer effectively reducing electrode capacitance and current leakage. Cyclic voltammetry showed the sigmoidal shape curves with low capacitive current and scan‐rate‐independent limiting current. Square‐wave voltammetry showed well‐defined peak shapes in voltammograms of K₃Fe(CN)₆ and 4‐acetamidophenol (acetaminophen) and the peak currents to be proportioned to their concentrations, demonstrating the feasibility for voltammetric analysis of the CNTs‐NEAs. The CNTs‐NEAs were also used successfully for voltammetric detection of trace concentrations of lead(II) at ppb level at first‐time. The CNTs‐NEAs provide an excellent platform for ultra sensitive electrochemical sensors for chemical and biological sensing.     

On two--block--factor sequences and one--dependence

The distributions of two--block--factors arising from i.i.d. sequences are observed to coincide with the distributions of the superdiagonals of jointly exchangeable and dissociated arrays . An inequality for superdiagonal probabilities of the arrays is presented. It provides, together with the observation, a simple proof of the fact that a special one--dependent Markov sequence of Aaronson, Gilat and Keane (1992) is not a two--block factor.