Synthesis of graft copolymers with “V‐shaped” and “Y‐shaped” side chains via controlled radical and anionic polymerizations

A combination of nitroxide‐mediated radical polymerization and living anionic polymerization was used to synthesize a series of well‐defined graft (co)polymers with “V‐shaped” and “Y‐shaped” branches. The polymer main chain is a copolymer of styrene and p‐chloromethylstyrene (PS‐co‐PCMS) prepared via nitroxide‐mediated radical polymerization. The V‐shaped branches were prepared through coupling reaction of polystyrene macromonomer, carrying 1,1‐diphenylethylene terminus, with polystyryllithium or polyisoprenyllithium. The Y‐shaped branches were prepared throughfurther polymerization initiated by the V‐shaped anions. The obtained branches, carrying a living anion at the middle (V‐shaped) or at the end of the third segment (Y‐shaped), were coupled in situ with pendent benzyl chloride of PS‐co‐PCMS to form the target graft (co)polymers. The purified graft (co)polymers were analyzed by size exclusion chromatography equipped with a multiangle light scattering detector and a viscometer. The result shows that the viscosities and radii of gyration of the branched polymers are remarkably smaller than those of linear polystyrene. In addition, V‐shaped product adopts a more compact conformation in dilute solution than the Y‐shaped analogy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4013–4025, 2007     

PU大分子单体水溶液性质

双亲聚合物一般由亲水和亲油 2种链段构成 ,有嵌段型[1,2 ] 和接枝型[3 ] 2种 ,其中通过大分子单体法合成双亲接枝聚合物备受关注[4] 。如以亲水性大分子单体和亲油性小分子单体共聚 ,大分子单体构成共聚物主链上支链 ,具有较大活动性 ,亲水效能高。采用对氯甲基苯乙烯[5] 或甲基丙烯酰氯[6] 与聚氧化乙烯大分子的一端相反应 ,可得到亲水性大分子单体 ,但其分子量及结构变化有限。本文采用常规条件 ,合成了嵌段式水溶性聚氨酯大分子单体 ,其分子量较大 ,共聚接枝的支链较长。利用该大分子单体具有非离子高分子表面活性剂的性质 ,采用无皂乳…     

Synthesis of well‐defined second‐generation dendritic polymers of isoprene (I) and styrene (S): (S2I)3, (SI′I)3, (I″I′I)3, and (I′2I)4

The synthesis of second‐generation (G‐2) dendritic polymers of isoprene (I) and styrene (S) was achieved with anionic polymerization high‐vacuum techniques and by performing the following steps: (1) selective reaction of a living chain with the chlorosilane group of 4‐(chlorodimethylsilyl)styrene (a dual‐functionality compound) to produce a macromonomer, (2) addition of a second living chain (same or different) to the double bond of the macromonomer, (3) polymerization of I with the anionic sites, and (4) reaction of the produced off‐center living species with trichloromethyl silane or tetrachlorosilane (CH₃SiCl₃ or SiCl₄). The combined characterization results showed that the G‐2 dendritic macromolecules synthesized—(S₂I)₃, (SI′I)₃, (I″I′I)₃, (I′₂I)₄—have a high molecular and compositional homogeneity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1519–1526, 2002     

Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

PVA-g-PS复合微球的制备与粒径控制研究

由链转移自由基聚合与端基置换反应法,合成了苯乙稀基单封端的聚醋酸乙烯酯(PVAc)大分子单体,使其与苯乙烯在乙醇/水的混合介质中进行自由基分散共聚,得到了表面以PVAc为接枝链的聚苯乙烯(PVAc-g-PSt)微球。将所得微球在碱性条件下醇解,形成了以亲水性聚乙烯醇(PVA)为壳、聚苯乙烯为核的复合微球(PVAc-g-PSt)。用核磁共振对聚合物的结构进行表征,定出了PVAc末端双键的含量;并用激光光散射、扫描电子显微镜对微球的粒径与形态进行了表征。研究结果表明,在共聚反应体系中大分子单体的分子量与浓度、苯乙烯浓度、引发剂浓度及溶剂的组成对微球的形态和粒径大小有明显影响。     

Principle of a new immunoassay based on electrophoretic mobility of poly(styrene/alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol) microspheres: application for the determination of helicobacter pylori IgG in blood serum

The principle of a novel latex diagnostic test for the determination of antibodies against Helicobacter pylori in blood sera is described. The test is based on the measurement of the electrophoretic mobility of the microspheres with immobilized H. pylori antigens. The electrophoretic mobility of these microspheres depends on the concentration of the antibodies against H. pylori in suspending medium. Particles with hydrophilic polyglycidol in the surface layer were used for the test. The microspheres were obtained by an emulsifier-free emulsion copolymerization of styrene and alpha-tert-butoxy-omega-vinylbenzyl-polyglycidol macromonomer (D(n) = 220 nm, diameter polydispersity factor D(w)//D(n) = 1.02). Activation of polyglycidol hydroxyl groups with cyanuric chloride allowed for covalent immobilization of H. pylori antigens. The fraction of H. pylori not specifically adsorbed onto the microspheres was negligible. Changes of the electrophoretic mobility of the microspheres with the surface concentration of the covalently immobilized H. pylori antigens Gamma = (1.6 +/- 0.3) . 10(-3) g m(-2) were suitable for the detection of the antibodies in the sera of patients with titer in the range (determined by the indirect ELISA test) from 1:500 to 1:32 000.     

Synthesis of end-functionalized polystyrenes with organosilicon end-capping reagents via living cationic polymerization

The end-functionalization of living polymers with bases (methanol, benzylamine, diethyl sodiomalonate, and sodium methoxide) and organosilicon compounds [X ? Si(CH₃)₃;X ? : CH₂?C(CH₃)COO? , CH₃COO? , CH₂?CHCH₂? , C₆H₅? ] was investigated in the living cationic polymerization of styrene initiated with the 1-phenylethyl chloride/SnCl₄/nBu₄NCl system in CH₂Cl₂ at ?15°C. The four bases and C₆H₅SiMe₃, independent of their structures, were apparently incapable of reacting with the living end and invariably led to polystyrenes with the ω-end chlorine [～ ～ ～ CH₂CH(Ph)Cl] originated from the initiating system. The number-average end-functionality (F?_n) of the chloride, determined by ¹H-NMR, was close to unity (F?_n > 0.9). The presence of chlorine in the polymer was also confirmed by elemental analysis. In contrast, the quenching by the trimethylsilyl compounds with X = methacryloxy, acetoxy, and allyl gave ω-end-functionalized polystyrenes with the corresponding terminal groups (X) for which the F?_n values were close to unity (F?_n > 0.9). The effects of the structure of silyl compounds on end-capping are also discussed. © 1994 John Wiley & Sons, Inc.     

Fast and solvent-free microwave-assisted synthesis of thermoresponsive oligo(glycidyl ether)s

Low-molecular weight linear poly(glycidyl ether)s are typically synthesized via the “classical,” oxy-anionic ring-opening polymerization (ROP) of glycidyl ether monomers at elevated temperatures. To reduce reaction times, a fast process was developed to synthesize oligo(glycidyl ether)s (OGEs) in bulk at a gram-scale utilizing microwave heating. Well-defined thermoresponsive copolymers comprising glycidyl methyl ether and ethyl glycidyl ether with molecular weights of up to 3 kDa were synthesized via microwave-assisted ROP with reaction times of approximately 10 min. The fast reaction kinetics were attributed to the rapid and uniform heating and high temperatures reached during the reaction. Consequently, no significant microwave-specific acceleration of the oxy-anionic ROP was observed. The temperature-triggered phase transition of the OGEs in aqueous solution revealed cloud point temperatures that are highly dependent on the OGE molecular weight, concentration, and comonomer composition, which extends previously reported data. Furthermore, oligo(glycidyl ether) acrylates (OGEAs) with reactive, functional end groups were directly accessible via in situ quenching of the anionic, microwave-assisted ROP with acrylic acid chloride. The obtained thermoresponsive OGEA macromonomers represent a promising material for the functionalization of surfaces via radical grafting methods to obtain functional, thermoresponsive coatings with potential application in cell culture. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2496–2504     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480