355nm Nd∶YAG激光在H_2中的高效一级斯托克斯转换

对脉冲Nd∶YAG激光(355 nm)在H2和H2∶He-Ar混合气体中的受激拉曼散射(SRS)进行了研究。在0.5 MPa的氢气中,同时测量到从二级反斯托克斯到三级斯托克斯的多波长输出,其总转化效率达88%;而高压下只剩下一级和二级斯托克斯输出,其中二级斯托克斯最大能量转化效率达44%(对应量子效率为63%)。由于高级斯托克斯的竞争,纯氢气中一级斯托克斯的最大能量转换效率不超过43%。通过向3 MPa氢气中掺入2 MPaAr气后,很好地抑制了二级斯托克斯的产生,从而获得了能量转换效率高达71%(对应量子效率为83%)的一级斯托克斯输出。对四波混频和级联受激拉曼散射在氢气多级斯托克斯产生中的作用以及惰性气体对它们的影响进行了讨论。     

Multivariate resolution of NMR labile signals by means of hard- and soft-modelling methods

One of the difficulties frequently encountered when studying acid–base equilibria with NMR spectroscopy is the labile behaviour of the measured signal, which hinders the application of bilinear multivariate data analysis methods. In this work, a mathematical transformation is proposed for the conversion of NMR labile signals to inert signals, which make possible the application of multivariate data analysis methods, based on bilinear data models. The procedure has been applied to the analysis of NMR data corresponding to the acid–base equilibria of nucleotides dCMP and dGMP. Both hard-modelling (EQUISPEC) and soft-modelling (MCR-ALS) approaches have been applied for the analysis and resolution of transformed bilinear NMR data matrices.     

IR multiphoton dissociation of CF3I. Pressure effect with inert and reactive gases

The IR multiphoton dissociation of CF₃I has been studied in the presence of isobutane and with isobutane and Ar and CO₂ as inert gases. The dependence of the reaction probability P(Φ) with fluence (ϕ) is confirmed. Modeling of the experimental results shows that for the energy transfer processes the average energy transferred per collision 〈†E〉_d varies with (ϕ).     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

2-(4-氯苯基)-3-甲基丁酸的消旋

以酸酐及有机惰性溶剂作混合溶剂，少量叔胺等作催化剂，2-(4-氯苯基)-3-甲基丁酸能在比较温和的条件下基本完全消旋，收率接近90％。     

SYNTHESIS AND THERMAL PROPERTIES OF POLYBENZOXAZOLE FROM SOLUBLE PRECURSOR WITH HYDROXY-SUBSTITUTED POLYENAMINONITRILE

Aromatic polybenzoxazole (PBO) precursor, hydroxy-substituted polyenaminonitrile, was prepared by direct polycondensation of 1,4-bis(l-chloro-2,2-dicyanovinyl)benzene (CCB) and 4,6-diaminoresorcinol dihydrochloride (DAR) using pyridine and N,N-dimethylacetamide as condensing agent and solvent. The precursor has good solubility in polar aprotic solvent which is due to the strong dipolar nature of the main chain. The soluble precursor was subjected to thermal cyclization in an inert atmosphere to convert it into the corresponding PBO, which has its 5% weight loss temperature at 540℃ The fully cyclized PBO were characterized by FT-IR and TGA. The introduction of 10% mol 1,3,5-benzenetricarboxylic chloride (BTC) into the main chain not only has little effect on the solubility of PBO precursor but also raises its 5% weight loss temperature to 552℃ and char yield at 700℃ for the cyclized PBO with BTC.     

All-glass open-split interface for capillary GC/MS

This paper describes a design for an all-glass GC/MS interface. The design has advantages due to low dead volume, lack of column effluent adsorption and degradation, simple interface production and installation, and ease of column mounting/dismounting.     

The scaled-particle theory and solvent isotope effects on the thermodynamic properties of inert solutes in water and methanol

The scaled-particle theory has been applied to the calculation of the thermodynamic changes associated with the formation of a cavity in several isotopic varieties of liquid water and methanol. From these results, the thermodynamic functions for the transfer of a cavity (or a hard-sphere solute) have been computed for the following solvent pairs: H₂OD₂O, H₂OH₂ ¹⁸O, H₂ ¹⁸OD₂ ¹⁸O, D₂OD₂ ¹⁸O, CH₃OHCH₃OD. For the last two of these solvents, density measurements required for the calculations were carried out as a function of temperature. The calculated deuterium solvent isotope effect on the heats and entropies of hard-sphere solutes in water is much greater than the¹⁸O isotope effect; the former also exhibits a more pronounced temperature dependence. The transfer functions computed for hard-sphere solutes are compared to experimental data on the transfer of various solutes from H₂O to D₂O and from CH₃OH to CH₃OD. In most of the cases examined, the cavity effect accounts for a large part of the transfer quantities measured for rare gases, hydrocarbons, and solutes containing a significant hydrocarbon substituent.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

An investigation of glasses for capillary chromatography

An investigation was conducted of various glasses, other than soda lime or borosilicate, for use in glass capillary gas chromatography. The work has uncovered some unique chromatographic qualities in the use of potash soda lead and fused silica glasses as materials for making glass capillary columns. The fused silica proved to be an ideal material for capillary column construction, being inherently more inert than glass containing metal oxides. It has been shown that through the use of thin wall capillary tubing of high flexibility many of the mechanical problems associated with glass capillary columns, such as fragility and column straightening, can be avoided.