Luminescence and lifetime characteristics of microphases in KCl:KI:Pb mixed crystals

Absorption and luminiscence measurements were performed on lead-doped KCl:KI mixed single crystals. Strong differences were found between as-grown and quenched samples. New bands were observed in the absorption spectra of unquenched samples in the spectral region between the limit positions of the A bands, corresponding to chloride or iodide lattices. The strong band at 449 nm dominates the luminescence of these samples at low temperatures. Its kinetics have a complicated form and the decay time is in the interval from ns to ms. Quenched samples have a well-known luminescence spectrum caused by octahedral lead impurity centres in KCl single crystals. The kinetics, however, also indicate mixed chlorine and iodine coordination of lead in the investigated crystals.     

Syntheses, Characterization and Crystal Structures of Two-dimensional 4,4''-Bipyridyl Lead Halides,PbI2 (4,4'' -bpy) and PbBr2 (4,4'' -bpy)

Two-dimensional 4,4-bipyridyllead halides, PbI2 (4,4'-bpy) (1) and PbBr2 (4,4'-bpy) (2), were synthesized. The structures were determined by means of X-ray single crystal diffraction.The structure shows a distorted octahedral configuration with six-coordinated central lead atoms. In crystals 1 and 2, the molecules are packed in a two-dimensional network structure through bridging halide atoms and 4,4'-bipyridine ligands between the adjacent lead atoms.     

Dislocation unpinning model of acoustic emission from alkali halide crystals

The present paper reports the dislocation unpinning model of acoustic emission (AE) from alkali halide crystals. Equations are derived for the strain dependence of the transient AE pulse rate, peak value of the AE pulse rate and the total number of AE pulse emitted. It is found that the AE pulse rate should be maximum for a particular strain of the crystals. The peak value of the AE pulse rate should depend on the volume and strain rate of the crystals, and also on the pinning time of dislocations. Since the pinning time of dislocations decreases with increasing strain rate, the AE pulse rate should be weakly dependent on the strain rate of the crystals. The total number of AE should increase linearly with deformation and then it should attain a saturation value for the large deformation. By measuring the strain dependence of the AE pulse rate at a fixed strain rate, the time constantτ _s for surface annihilation of dislocations and the pinning timeτ _p of the dislocations can be determined. A good agreement is found between the theoretical and experimental results related to the AE from alkali halide crystals.     

Preparation of solutions of amidomagnesium chlorides in poly(ethylene oxide) and their characterization by conductivity measurements

Polymer electrolyte systems were prepared for the first time by dissolution of amidomagnesium chlorides in poly(ethylene oxide), (PEO). For the preparation, solutions of (hexamethyldisilylamido)magnesium chloride, (dimethylpyrrolyl)magnesium chloride, (diisopropylamido)magnesium chloride, piperidinomagnesium chloride and morpholinomagnesium chloride were chosen. The composition of these polymer electrolyte systems corresponds to the general formula R₂NMgCl·P(EO)_n·THF. Most work has been done with the system (hexamethyldisilylamido)magnesium chloride in PEO, (Me₃Si)₂NMgCl·P(EO)_n·THF, with n= 3, 4, 5, or 7. The electrolytes have a soft rubber-like consistency. At 30 °C, electrical conductivities of 10⁻⁶–10⁻⁵ S/cm were found. The conductivities were measured in the temperature range 20–60 °C. Within this temperature range a linear dependence of the logarithms of the conductivity on the inverse temperature was found and activation energies for the conducting process of 30–60 kJ/mol were calculated. Using those polymer electrolytes with a high content of the amidomagnesium compound, a reversible magnesium deposition takes place by cathodic reduction at potentials below −1.9 V vs. a Ag/AgCl reference electrode. These polymer electrolytes were found to be stable against oxidation up to about −0.3 V vs. Ag/AgCl. Electronic Publication     

LIGHT-SCATTERING STUDY OF POLYELECTROLYTE HOLLOW CAPSULES

Silver halide (AgX) microcrystal was used as template to synthesize hollow polyelectrolyte capsules. These hollow capsules were characterized by laser light scattering (LLS) used to measure the size of the capsules in solution. The ratio of hydrodynamic radius (Rh) from dynamic LLS to the radius of gyration (Rg) from static LLS is almost unity, revealing that the entities are hollow in solution. The results suggest that the LLS method can be regarded as a good complement to the confocal laser scanning microscopy (CLSM) method for the characterization of small hollow capsules, and it possesses the advantage of not needing fluorescence labeling.     

New stage in living cationic polymerization: An array of effective Lewis acid catalysts and fast living polymerization in seconds

Our recent extensive research on Lewis acid catalysts with a weak base for the cationic polymerization of vinyl ethers led to unprecedented living reaction systems: fast living polymerization within 1–3 s; a wide choice of metal halides containing Al, Sn, Fe, Ti, Zr, Hf, Zn, Ga, In, Si, Ge, and Bi; and heterogeneously catalyzed living polymerization with Fe₂O₃. The use of added bases for the stabilization of the propagating carbocation and the appropriate selection of Lewis acid catalysts were crucial to the success of such new types of living polymerizations. In addition, the base‐stabilized living polymerization allowed the quantitative synthesis of star‐shaped polymers with a narrow molecular weight distribution via polymer‐linking reactions and the precision synthesis and self‐assembly of stimuli‐responsive block copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1801–1813, 2007.     

Photochemistry of perfluoroacyl halides in the presence of O2 and CO

Photolyses of CF₃C(O)X and C₂F₅C(O)X (X=Cl, F) at 254 nm in the presence of O₂ yield the perfluorinated radicals C₂F₅O (C₂) and CF₃O (C₁), respectively. The C₂ radicals decompose to give CF₃ radicals:

C₂F₅O→CF₃+CF₂O

which, in turn, react with O₂ leading to the formation of C₁ radicals. When in addition to O₂, CO is present, the C₁ radicals react with it leading to its catalytic oxidation to CO₂. The trioxide CF₃OC(O)O₃C(O)OCF₃ was observed following the photolysis of all four halides in the presence of O₂ and CO.

The other radical partners coming from the initial step in the photolysis (XC(O)) as well as the products of their reaction with O₂ (XC(O)O_y, y=1, 2) do not react with CO but when X=F they lead to the formation of a new stable peroxy molecule with the formula CF₃OC(O)O₂C(O)F. Some of the properties of this new molecule, its stability and its IR features are presented in this work.     

Novel synthesis of 4-halo-3-hydroxy-2-pyrone: one pot rearrangement-cyclization reaction by magnesium halide

Treatment of acetonide protected 4,5-dihydroxy-2-chloroglycidic ester or its rearrangement product, the acetonide protected 4,5-dihydroxy-3-chloro-2-oxo ester, with magnesium halides gave 4-halo-3-hydroxy-2-pyrone in excellent to reasonable yields in one pot. The mechanism of this novel one pot rearrangement-cyclization reaction is also proposed.     

An efficient route to regioselective opening of N-tosylaziridines with zinc(II) halides

An efficient route for the regio- and stereoselective ring opening of N-tosylaziridines with zinc dihalides (ZnX₂, X = Cl, Br, I) is described. Depending on the solvent and Zn(II) halide, β-halo amines or imidazolines are obtained selectively in good to excellent yields.     

长链烷基胺氢卤酸盐的热致相变

差示扫描量热法（ＤＳＣ）结果表明，烷基胺氢卤酸盐化合物的相变温度与化合物烷基链链长之间存在明显的规律性，固－固结构相变的主相变峰温随烷基链链长的递增而升高，其逆相变过程表现出明显的热滞后现象；而熔融相变温度则随烷基链链长的递增而降低；实验结果还表明，试样的陈化放置过程以及结晶过程中所用的溶剂对化合物的热致相变历程都有明显的影响。