Preparation of novel analgesics via diastereoselective nucleophilic addition to 1-dimethylamino-2-methylpentan-3-one

The diastereoselective synthesis of naphthyl amino alcohols via nucleophilic addition to racemic 1-dimethylamino-2-methylpentan-3-one was studied. The use of the appropriate experimental conditions allowed the synthesis of both diastereoisomers. The relative configurations were established via NOESY experiments.     

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) and poly(aryl ether ether ketone)

Rhythmic growth of ring‐banded spherulites in blends of liquid crystalline methoxy‐poly(aryl ether ketone) (M‐PAEK) and poly(aryl ether ether ketone) (PEEK) has been investigated by means of differential scanning calorimetry (DSC), polarized light microscopy (PLM), and scanning electron microscopy (SEM) techniques. The measurements reveal that the formation of the rhythmically grown ring‐banded spherulites in the M‐PAEK/PEEK blends is strongly dependent on the blend composition. In the M‐PAEK‐rich blends, upon cooling, an unusual ring‐banded spherulite is formed, which is ascribed to structural discontinuity caused by a rhythmic radial growth. For the 50:50 M‐PAEK/PEEK blend, ring‐banded spherulites and individual PEEK spherulites coexist in the system. In the blends with PEEK as the predominant component, M‐PAEK is rejected into the boundary of PEEK spherulites. The cooling rate and crystallization temperature have great effect on the phase behavior, especially the ring‐banded spherulite formation in the blends. In addition, the effects of M‐PAEK phase transition rate and phase separation rate on banded spherulite formation is discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3011–3024, 2007     

An efficient phosphine-free palladium coupling for the synthesis of new 2-arylbenzo[b]thiophenes

Straightforward and rapid access to 2-arylbenzo[b]thiophenes has been developed. It involved a catalytic coupling of 3-activated benzo[b]thiophenes with several aryl halides in the presence of a phosphine-free palladium system. In case of fragile functional groups such as aldehydes, a quaternary ammonium was used as an additive as with the other substrates, the coupling performed better and faster in the presence of a crown ether, the best one being DCH-18-C-6, with good yields and low reaction times. This method would provide a direct access to novel structures of biological interest.     

Synthesis of aromatic poly(thioether ketone)

Aromatic poly(thioether ketone)s were prepared by the direct polycondensation of aromatic dicarboxylic acids with aryl compounds containing ether or sulfide structures using phosphorus pentoxide/methanesulfonic acid (PPMA) as a condensing agent and solvent. Polycondensation proceeded smoothly and produced aromatic poly(thioether ketone)s with inherent viscosities up to 0.73 dL/g. The synthesis of substituted aryl ketones by the reaction of substituted benzoic acids with aryl compounds in PMMA was studied in detail to demonstrate the feasibility of the reaction for polymer formation. The thermogravimetry of the aromatic poly(thioether ketone)s showed a 10% weight loss in air and nitrogen at around 450 and 460°C, respectively. © 1992 John Wiley & Sons, Inc.     

手性氨基醇催化的前手性芳酮的不对称还原反应

首次以天然D-樟脑的衍生物为原料, 合成了两个新型龙脑基氨基醇配体, 研究了它们与硼烷原位制备成手性噁唑硼烷后, 在不对称催化氢化还原前手性芳酮中的性能, 得到的手性仲醇的对映体过量(ee)值最高可达96%, 还考察了反应温度、时间、溶剂等因素对苯乙酮的不对称氢化还原的化学产率和光学收率的影响.     

芳醚树枝形聚合物的合成及分子内光敏异构化反应研究

利用收敛法合成了一代到四代外围带有二苯酮、核心带有降冰片二烯的芳醚树枝形聚合物, 初步研究了这些化合物的分子内光敏异构化反应. 以波长大于350 nm的光选择激发外围的二苯酮官能团引起核心处降冰片二烯基团异构化为四环烷, 随着代数的增长, 光敏异构化反应的速率逐渐加快.     

双-单齿芳香酰胺型配体桥联La3＋一维配位聚合物的合成与晶体结构

通过硝酸镧和双-单齿芳香酰胺型配体L {L＝1,4-双[(2'-苄胺甲酰基苯氧基)-甲基]苯}之间的反应得到了配位聚合物{[La(NO₃)₃]₂•L₃}_n, 并用X射线单晶衍射测定了配合物的晶体结构. 配合物为三斜晶系, _P1空间群, 晶胞参数a＝1.1298(2) nm, b＝1.2689(1) nm, c＝2.1030(3) nm, α＝81.189(9)°, β＝80.95(1)°, γ＝65.832(9)°, V＝2.7032(6) nm³, Z＝2, R＝0.0267, wR＝0.0679, La^3＋为9配位, 呈变形的三帽三角棱柱配位构型. 配合物通过配体的桥联作用形成一维环链相间的配位聚合结构, 由于相邻链间不存在氢键和π-π堆积作用, 所以配合物是以单链形式堆积排列.     

新型含氟聚芳醚酮的合成与表征

聚芳醚酮具有很高的热稳定性和优良的电性能及机械性能 ,已经被广泛应用于宇航、电子及核能等高技术领域 [1] .氟元素的引入可以降低材料介电常数、折光指数和吸水率 ,提高热稳定性、溶解性和阻燃性 ,增加材料透明度 ,使这类聚合物在光电子、光学和微电子等应用领域的研究倍受关注 [2～ 4 ] .本文在合成含三氟甲基苯侧基的聚芳醚酮 [5] 的基础上 ,设计并合成了新型的含氟量更高的单体和聚合物 ,并对其性能进行了初步研究 .1　实验部分1 .1　试剂与仪器　 [3,5 -二 (三氟甲基 ) ]苯代对苯醌 (自制 ) ;锌粉 ,A.R.级 ,天津化学试剂一厂产品 ;…     

含间苯基聚芳醚酮的合成与性能研究

含间苯基聚芳醚酮的合成与性能研究林权，张万金，吴忠文，尹玖梅（吉林大学化学系，长春，１３００２１）（中国科学院长春应用化学研究所）关键词聚芳醚酮，间苯基，熔点，结晶度聚芳醚酮作为一类耐高温特种工程塑料，由于具有优异的热、电、机械性能，已被广泛应用于电...