Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

Influence of organic modifiers on morphology and crystallization of poly(ϵ‐caprolactone)/synthetic clay intercalated nanocomposites

ε‐caprolactone was polymerized in the presence of neat montmorillonite or organomontmorillonites to obtain a variety of poly(ε‐caprolactone) (PCL)‐based systems loaded with 10 wt % of the silicates. The materials were thoroughly investigated by different X‐ray scattering techniques to determine factors affecting structure of the systems. For one of the nanocomposites it was found that varying the temperature in the range corresponding to crystallization of PCL causes reversible changes in the interlayer distance of the organoclay. Extensive experimental and literature studies on this phenomenon provided clues indicating that this effect might be a result of two‐dimensional ordering of PCL chains inside the galleries of the silicate. Small angle X‐ray scattering and wide angle X‐ray scattering investigation of filaments oriented above melting point of PCL revealed that polymer lamellae were oriented perpendicularly to particles of unmodified silicate, while in PCL/organoclay systems they were found parallel to clay tactoids. Calorimetric and microscopic studies shown that clay particles are effective nucleating agents. In the nanocomposites, PCL crystallized 20‐fold faster than in the neat polymer. The crystallization rate in nanocomposites was also significantly higher than in microcomposite. Further research provided an insight how the presence of the filler affects crystalline fraction and spherulitic structure of the polymer matrix in the investigated systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2350–2367, 2007     

Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

The change of the superstructure of semicrystalline polymers during deformation: results from small-angle scattering with synchrotron radiation

The change of the superstructure of different polyethylenes during uniaxial deformation is investigated. The method used is small-angle scattering with synchrotron radiation. For branched polyethylene (Lupolen 1840D) the whole deformation range is analyzed. Beginning with superstructure of the lamellar cluster type, the superstructure partly disappears on a time scale of a few minutes and the fibrillar structure is built up. The degree of destruction and rebuilding depends on the drawing temperature. For very high molecular weight polyethylene (GUR) a reversible change of the superstructure at higher deformation ratios and at different temperatures is observed. The superstructure of (ethylene—hexene) copolymers (TIPELIN) at high draw ratios depends on the drawing temperature and is almost independent of the side group content. Interfibrillar microcracks parallel to the draw direction are produced in samples with a low side group content for draw ratios λ ≥ 1.5.     

The colloid-structure of semicrystalline low-density polyethylene

The length-distribution of stereoregular sequences in low-density polyethylene (LDPE) is determined by a computer-aided analysis of cp-melting curves within the framework of thermodynamics of eutectoid copolymers. Small-angle x-ray scattering patterns are then described by using the structure data derived. One of the results is that fluctuations of the mean electron-density are increasingly reduced with an increasing degree of crystallinity.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

Effect of nanotube functionalization on the properties of single‐walled carbon nanotube/polyurethane composites

A commercially available aliphatic thermoplastic polyurethane formulated with a methylene bis(cyclohexyl) diisocyanate hard segment and a poly(tetramethylene oxide) soft segment and chain‐extended with 1,4‐butanediol was dissolved in dimethylformamide and mixed with dispersed single‐walled carbon nanotubes. The properties of composites made with unfunctionalized nanotubes were compared with the properties of composites made with nanotubes functionalized to contain hydroxyl groups. Functionalization almost eliminated the conductivity of the tubes according to the conductivity of the composites above the percolation threshold. In most cases, functionalized and unfunctionalized tubes yielded composites with statistically identical mechanical properties. However, composites made with functionalized tubes did have a slightly higher modulus in the rubbery plateau region at higher nanotube fractions. Small‐angle X‐ray scattering patterns indicated that the dispersion reached a plateau in the unfunctionalized composites that was consistent with the plateau in the rubbery plateau region. The room‐temperature modulus and tensile strength increase was proportionally higher than almost all increases seen previously in thermoplastic polyurethanes; however, the increase was still an order of magnitude below what has been reported for the best nanotube–polymer systems. Nanotube addition increased the hard‐segment glass transition temperature slightly, whereas the soft‐segment glass transition was so diffuse that no conclusions could be drawn. Unfunctionalized tubes suppressed the crystallization of the hard segment; whereas functionalized tubes had no effect. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 490–501, 2007     

Allophane: a natural gel in volcanic soils with interesting environmental properties

Volcanic (allophanic) soils are interesting in terms of the control of the greenhouse effect and the knowledge of the porous features is of importance to understand the mechanism of C and N sequestration. These soils contain a peculiar clay: allophane aggregates quite close to the synthetic mineral gels aggregates. These volcanic materials behave as gels during drying with a large irreversible shrinkage that can modify the soil physical properties. Consequently, as for silica gels, we use the CO₂ supercritical drying procedure (SD) to control the drying step and to preserve the structural and textural properties of the soils. The experimental results show that the N and C content in the soils is clearly dependent on the allophane content. We also show that the textural properties, such as specific surface area, are higher for the supercritically dried samples, compared to the classically dried samples, and SAXS results confirm the preserving effect of the SD. With these data, we propose possible effects of the specific surface area on the C and N content of the allophanic soils.     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

FRS-XRSA与SAXS研究硬弹性聚丙烯的结晶度、取向与超结构Ⅲ应变与回复

应用全倒易空间Ｘ 射线散射理论分析（ＦＲＳ ＸＲＳＡ）与ＳＡＸＳ研究了ＨＥＰＰ在应变（ε）与回复（Ｒ）过程中结晶、取向与超结构的变化．结果指出，ε可以诱发结晶，但当ε≥３０％后，结晶度（ＸＷＣ）趋于不变：ε可以导致晶粒破碎；ε与Ｒ对取向分布与平均取向基本上无影响，这符合片晶平行分离模型，而非叶簧弯曲模型；发现，在ε≤３０％时，层状片晶的分离为主要过程，而当ε＞３０％后，则分离的片晶会发生断层滑移；ε可以诱发微孔，类似地当ε＞２０％，微孔尺寸亦趋不变．从凝聚态结构阐明了ＨＥＰＰ在ε Ｒ过程中不同阶段的结构变化