Interactions between the components in isotactic polypropylene blended with EPDM

The interaction of isotactic polypropylene with ethylene propylene diene terpolymer in their blends has been investigated by use of differential scanning calorimetry, dynamic mechanical analysis, wide- and small-angle x-ray scattering, and by investigating the nucleation and kinetics of crystallization of the iPP component under the polarization microscope. It is found, that the dispersion of the EPDM component in the iPP matrix is dependent on blend composition and is maximal at 10% EPDM content. An interface layer between the two components is formed by migration of iPP molecules into the EPDM phase. A model for this interface is proposed.     

The interfacial conformation of polypropylene glycols and foam behaviour

The foam behaviour of low molecular weight polypropylene glycols (PPG) was investigated as a function of concentration and molecular weight (190–2000 g mol⁻¹). For each polypropylene glycol, foam stability increases with concentration and passes through a maximum, beyond which foamability is suppressed as the solubility limit of the glycol is exceeded and droplets of glycol form. Light-scattering data as well as static and dynamic surface tension results provide the key information leading to these interpretations. A maximum in foamability was observed for the PPG molecules with increasing molecular weight (caused by a change in molecular conformation at the interface). This suppresses the Marangoni effect and leads to a decrease in foam stability.     

Instrumental neutron activation analysis of mass fractions of toxic metals in plastic

It is very challenging to decompose a plastic product for the purpose of analysis of hazardous elements contained. To circumvent such technical problem, it is imperative that an analyst employ a nondestructive analytical method free of any pretreatments. The analytical results of the concentrations of toxic metals such as Cd and Cr in polypropylene for seven samples at two different levels were obtained using the instrumental neutron activation analysis. This work was intended ultimately to establish certified reference materials (CRMs) of these metals in the polypropylene, traceable to the SI. The uncertainties associated with the analytical procedures were estimated in accordance with the ISO guideline. The results were subsequently validated by a comparison with those for CRM-680 and −681 of the Bureau Communautaire de Reference (BCR), which demonstrated acceptable agreement within their uncertainty ranges.     

聚丙烯胺肟螯合纤维的合成及其对铜（Ⅱ）离子的吸附

利用预辐照接枝法合成了聚丙烯胺肟螯合纤维，研究了影响接枝率，胺肟基团含量及离子吸附的因素，该纤维对铜的离子的吸附容量达０．６７ｍｍｏｌ／ｇ干纤维。     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

多组分单体接枝聚丙烯/尼龙6反应共混物结晶行为研究

用多组分熔融接枝的方法将甲基丙烯酸缩水甘油酯 (GMA)和苯乙烯 (St)共同接枝到聚丙烯 (PP)上 ,制得具有较高GMA接枝率的多单体接枝聚丙烯 ,PP g (GMA co St) .将PP g (GMA co St)与尼龙 6 (PA6 )进行共混 ,利用扫描电镜 (SEM) ,差示扫描量热计 (DSC)和广角X射线衍射 (WAXD)对共混物的形态和结晶进行了研究 .在共混过程中 ,PP g (GMA co St)与PA6反应原位生成了PP g PA6 ,有效改善了共混物的相容性 ,分散相尺寸明显减小 .在PP g (GMA co St) PA6为 3 7的体系中 ,PP g (GMA co St)出现分级结晶现象 ,其在较低温度下的结晶属于均相成核结晶 .在PP g (GMA co St) PA6为 7 3的体系中 ,由于PA6相分散细微 ,在通常结晶温度下不结晶 ,而是在低温下均相成核与PP g (GMA co St)同时结晶 .WAXD证实体系中接枝PP ,PA6为分别结晶 ,无共晶或新的晶型产生     

STRUCTURING ＆ RHEOLOGY OF MOLTEN POLYMER／CLAY NANOCOMPOSITES

The evolution and the origin of “solid-like state” in molten polymer/clay nanocomposites are studied. Using polypropylene/clay hybrid (PPCH) with sufficient maleic anhydride modified PP (PP-MA) as compatibilizer, well exfoliation yet solid-like state was achieved after annealing in molten state. Comprehensive linear viscoelasticity and non-linear rheological behaviors together with WAXD and TEM are studied on PPCH at various dispersion stages focusing on time,temperature and deformation dependencies of the “solid-like” state in molten nanocomposites. Based on these, it is revealed that the solid-structure is developed gradually along with annealing through the stages of inter-layer expansion by PP-MA,the diffusion and association of exfoliated silicate platelets, the formation of band/chain structure and, finally, a percolated clay associated network, which is responsible for the melt rigidity or solid-like state. The network will be broken down by melt frozen/crystallization and weakened at large shear or strong flow and, even more surprisingly, may be disrupted by using trace amount of silane coupling agent which may block the edge interaction of platelets. The solid-like structure causes characteristic non-linear rheological behaviors, e.g. residual stress after step shear, abnormal huge stress overshoots in step flows and, most remarkably, the negative first normal stress functions in steady shear or step flows. The rheological and structural arguments challenge the existing models of strengthened entangled polymer network by tethered polymer chains connecting clay particles or by chains in confined melts or frictional interaction among tactoids. A scheme of percolated networking of associated clay platelets, which may in band form of edge connecting exfoliated platelets, is suggested to explain previous experimental results.     

聚丙烯改性研究

采用马来酸酐、二甲基丙烯酸乙二醇酯、三羟甲基丙烷三基丙烯酸酯对聚丙烯进行改性。以自由基反应机理为基础，讨论了引发剂用量、反应时间、改性试剂的种类、用量等因素对改性ＰＰ凝胶含量及性能的影响，提出了力学性能的优选条件。得到了力学性能优良的改性ＰＰ，为其进一步功能化提供了理论参考。     

预辐射聚丙烯反应挤出接枝丙烯酸的研究

利用电子束(EB)预辐照方法和反应挤出技术制备了聚丙烯接枝丙烯酸共聚物PP-g-AA. 采用化学滴定、红外光谱、偏光显微镜(PLM)、DSC和广角X射线衍射(WAXD)对接枝产物进行了表征. 研究结果表明, 接枝率随辐照剂量增加而增大并逐渐达到平台值, 但随单体浓度增大而表现为线性增加, 接枝链能起到异相成核作用, 从而提高了结晶速率并细化了球晶. 同时, 熔体流动速率(MFR)和力学性能测试结果表明, 预辐射和挤出过程造成了PP严重降解, 据此可认为接枝反应主要发生在聚丙烯断裂分子链的末端.     

Influence of nanodispersed boehmite on polypropylene photooxidation

Nanocomposites containing pure or organically modified nanoboehmites of different sizes were prepared by melt compounding with polypropylene. The samples were UV light irradiated in artificial accelerated conditions representative of solar irradiation (λ > 300 nm) at 60 °C in air. The chemical modifications resulting from photooxidation were followed by IR and UV-visible spectroscopies. The presence of pristine nanoboehmites was shown to change the rate of oxidation of polypropylene by reducing the oxidation induction period due to the presence of residual processing antioxidant. The differences of the oxidation induction periods between the nanocomposites and the pristine polymer disappear after solvent extraction of the antioxidant. The inefficiency of traditional antioxidant in retarding the photooxidation of polypropylene containing nanodispersed boehmite is proved. Antioxidant migration to the boehmite surface induced by the preferential interaction with the polar filler is proposed as an explanation. The oxidative behaviour of the organically modified boehmites was shown to depend on the type of organic substituent. p-Toluenesulfonate reduces the adsorption of antioxidants while the presence of a long-chain alkyl benzensulfonate increased the oxidation rate by generation of radical initiators.