Trends in the detection of pharmaceuticals and endocrine-disrupting compounds by Field-Effect Transistors (FETs)

Field-effect transistors (FETs) are one of the most widely-used electronic sensors for continuous monitoring and detection of contaminants such as pharmaceuticals and endocrine-disrupting compounds at low concentrations. FETs have been successfully utilized for the rapid analysis of these environmental pollutants due to their advantageous material properties like the disposability, rapid responses and simplicity. This paper presented an up-to-date overview of applied strategies with different bio-based materials in order to enhance the analytical performances of the designed sensors. Comparison and discussion were made between characteristics of recently engineered FET bio-sensors used for the detection of famous and selected pharmaceutical compounds in the literature. The recent progress in environmental research applications, comments on interesting trends, current challenge for future research in endocrine-disrupting chemicals’ (EDCs) detection using FETs biosensors were highlighted.     

Applications of coupled LC-GC: A review

Although coupled liquid chromatographygas chromatography (LC-GC) was first demonstrated ten years ago, only in the last few years has there been a sudden surge of interest in the technique. Approximately 70% of the total number of LC-GC applications have been published in the last two years (1987–88) alone. This review categorizes LC-GC publications into four main application areas: fossil fuels, foods, environmental samples, biologiical/pharmaceutical samples, and miscellaneous samples. Multidimensional separations carried out using other coupled-column chromatographic techniques (such as supercritical fluid chromatography (SFC) with GC, and on-line trace enrichment-GC) have also been included in this review.     

Mass spectral analysis and imaging of tissue by ToF-SIMS—The role of buckminsterfullerene, C60, primary ions

Recent developments in desorption/ionisation mass spectrometry techniques have made their application to biological analysis a realistic and successful proposition. Developments in primary ion source technology, mainly through the advent of polyatomic ion beams, have meant that the technique of secondary ion mass spectrometry (SIMS) can now access the depths of information required to allow biological imaging to be a viable option.Here the role of the primary ion C₆₀⁺ is assessed with regard to molecular imaging of lipids and pharmaceuticals within tissue sections. High secondary ion yields and low surface damage accumulation are demonstrated on both model and real biological samples, indicating the high secondary ion efficiency afforded to the analyst by this primary ion when compared to other cluster ion beams used in imaging. The newly developed 40 keV C₆₀⁺ ion source allows the beam to be focused such that high resolution imaging is demonstrated on a tissue sample, and the greater yields allow the molecular signal from the drug raclopride to be imaged within tissue section following in vivo dosing.The localisation shown for this drug alludes to issues regarding the chemical environment affecting the ionisation probability of the molecule; the importance of this effect is demonstrated with model systems and the possibility of using laser post-ionisation as a method for reducing this consequence of bio-sample complexity is demonstrated and discussed.     

Simultaneous determination of cloramphenicol, salicylic acid and resorcinol by capillary zone electrophoresis and its application to pharmaceutical dosage forms

This study demonstrates the separation of active ingredients in acne formulations (salicylic acid, cloramphenicol and resorcinol in presence of azulene) by capillary zone electrophoresis. Factors affecting their separations were the buffer pH and concentration, applied voltage, sample preparation, and presence of additives. Optimun results were obtained with a 50 mM sodium tetraborate-50 mM sodium phosphate, pH 9.0. The carrier electrolyte gave baseline separation with good resolution, short migration times (<6 min), great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.39-1.25 μg ml⁻¹. The procedure was fast and reliable and commercial pharmaceuticals could be analysed without prior sample clean-up procedure.     

PVC膜电极上的示波电位滴定法及其在药物分析中的应用

本文研究了用于示波电位滴定的PVC膜电极,成功地用于中和、络合及沉淀滴定,并探讨了它们在药物分析中的应用。所研究电极见表1。实验部分一仪器与试剂 SR-071型双踪示波器,213型铂片电极     

Chemiluminescence Determination of Benzoic Acid Using A Solid-Phase Verdigris Reactor

Benzoicacidisacommonadditiveusedwidelyasfoodpreservativeandplasticizer.Itcouldpromoteseverereactiontoallergicpopulationevenatlowconcentrationlevel1.Routinemethodsfortheassayofbenzoicacidincludeschromatographic2-6,spectrophotometry7,8,capillaryelectrophoresis9-13andelectrochemicaltitration14.Stokes15etal.monitoredairbornebenzoicacidbasedonsurface-enhancedRamanscatteringtechniques.Thereisalsoreportonamicrobialsensorusingpseudomonasforbenzoicacidandtheirderivativesinaqua16.Interestofusinglumines…     

Electrochemical Evaluation of Nucleoside Analogue Lamivudine in Pharmaceutical Dosage Forms and Human Serum

Lamivudine (LAM) is a synthetic nucleoside analogue with activity against human immunodeficiency virus‐type 1 (HIV‐1) and Hepatitis B virus (HBV). The aim of this study was to determine LAM levels in serum and pharmaceutical formulations, by means of electrochemical methods using hanging mercury drop electrode (HMDE). On this electrode, LAM undergoes irreversible reduction at the peak potential near E_p?1.26 V (vs. Ag/AgCl/3 M KCl). Reduction LAM signals were measured by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square‐wave voltammetry (OSW). DPV and OSW techniques for the determination of LAM in acetate buffer at pH 4.5, which allows quantitation over the 4×10^?6 to 1×10^?4 M range in supporting electrolyte for both methods, were proposed. The linear response was obtained in acetate buffer in the ranges of 2×10^?6 to 2×10^?4 M for spiked serum samples at pH 4.5 for both techniques. The repeatability and reproducibility of the methods for all media were determined. The standard addition method was used in serum. Precision and accuracy were also checked in all media. No electroactive interferences from the endogenous substances were found in serum. With respect to side effects of high doses and short half‐life of LAM, a fast and simple detection method is described in this study.     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

Simultaneous Determination of Pioglitazone and Glimepiride by High-Performance Liquid Chromatography

A rapid and accurate HPLC method has been developed for simultaneous determination of pioglitazone and glimepiride. Chromatographic separation of the two pharmaceuticals was performed on a Cosmosil C₁₈ column (150 mm × 4.6 mm, 5 m) with a 45:35:20 (v/v) mixture of 0.01 m triammonium citrate (pH adjusted to 6.95 with orthophosphoric acid), acetonitrile, and methanol as mobile phase, at a flow rate of 1.0 mL min^–1, and detection at 228 nm. Separation was complete in less than 10 min. The method was validated for linearity, accuracy, precision, limit of quantitation, and robustness [1, 2]. Linearity, accuracy, and precision were found to be acceptable over the ranges 2.50–30.00 g mL^–1 for pioglitazone and 0.10–10.00 g mL^–1 for glimepiride.     

表面活性剂增敏2.5次微分极谱测定香豆素

拟定了表面活性剂增敏、2 .5次微分极谱测定香豆素的方法。在含 6.0× 10 -6 mol·L-13 氯 2 羟丙基 三甲基氯化铵的 0 .1mol·L-1KH2 PO4 Na2 HPO4 (pH 6.8)缓冲液中 ,香豆素还原波 [峰电位Ep=- 1.60V(vs .SCE) ]的 2 .5次微分极谱峰峰电流e″p 与其浓度在 4 .0× 10 -7～ 6.0× 10 -5mol·L-1范围内呈良好线性关系 (r =0 .9998,n =10 ) ,检出限为 1.2× 10 -7mol·L-1。 13次平行测量 8.0× 10 -6 mol·L-1香豆素的峰电流 ,RSD为 1.5 %。该方法可用于中药白芷中香豆素的直接测定