Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

醇在α-A12O3和硅胶G表面上的脱附规律

吸附质在两相界面上的吸附行为对多相催化、界面化学等有重要意义[1,2]。本文采用程序升温法分别测定了13种醇在α Al2O3和硅胶G表面上的脱附温度td,发现td与醇的沸点及烷基化效应指数[3](PEI)有定量关系。1　实验红外干燥箱100℃干燥30分钟后的吸附剂在所研究的吸附质的饱和蒸汽压、室温下平衡24-48h,以达到吸附平衡;取20-25mg吸附平衡后的吸附剂,用PCT 1A型差热天平进行TG/DTA分析,升温速率为2 5℃/min,升温范围从室温到250℃,由计算机进行数据采集(RSZ 200热分析系统软件),从DTA曲线的最高峰值确定脱附温度,每个样品重复3-5…     

Fluorescence observations on complex formation between linear and hyperbranched polyelectrolytes in dilute aqueous solutions

The complexation between poly(ethylene imine) (PEI) and poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) or AMPS copolymers was investigated with the relative excimer emission intensity I_E/I_M of a cationic probe 1-pyrenemethylamine hydrochloride (PyMeA · HCl), fluorescence nonradiative energy transfer (NRET) I_Py/I_Np of naphthalene to pyrene labels, the fluorescence anisotropy r and I_E/I_M of pyrene labels. PEI was a hyperbranched weak polycation in acid solution, which formed complex with anionic polyelectrolytes due to the electrostatic attraction. The I_E/I_M of PyMeA · HCl probe decreased to zero, the intra-, intermolecular NRET I_Py/I_Np and I_E/I_M of pyrene labels on the AMPS copolymers reached their maxima when χ was increased from 0 to 2.4, which was defined as the mole ratio of the amino group in PEI to the AMPS group in the polyanion. These facts indicated the formation of nonstoichiometric complex of the oppositely charged polyelectrolytes when χ = 2.4 at the concentration much lower than their overlap concentrations. The intermolecular aggregate appeared as indicated by an increase in the intermolecular I_Py/I_Np and r with χ up to 2.4 due to neutralizing and hydrophobizing the polyelectrolytes and the bridging effect of the PEI chain bound on different polyanion chains. At high pH, PEI became a neutral polymer and did not bind with the AMPS anion to form the complex as illustrated by the constant value of r for the pyrene labels attached to the AMPS polyanion as that without addition of PEI. The amino group in PEI quenched pyrene and naphthalene emission, resulting a decrease in both I_Np and I_Py.     

Antimicrobial silica particles loaded with quaternary ammonium polyethyleneimine network

Silica particles functionalized with quaternary ammonium groups were prepared by interpenetrating polyethylenimine (PEI) into silica particles and crosslinking with diiodopentane, followed by octyliodide alkylation and methyliodide quaternarization (S‐QA‐PEI). The synthesized S‐QA‐PEI particles were identified with a slight particle size increase of 2–3 µm. Different ratios of PEI:silica particles were prepared and analyzed. While silica particles are negatively charged, ?16.7 ± 5.11 mV, the prepared S‐QA‐PEI particles are positively charged, +50–60 mV. These particles were embedded in poly(ethylene vinyl acetate) and poly(ethylene methacrylic acid) coatings which exhibited strong antibacterial activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Miscible blends of nitro‐substituted polybenzimidazole and polyetherimide

A novel blend system was prepared by blending organosoluble nitro‐substituted polybenzimidazole (NO₂‐PBI) and polyetherimide (PEI) in a cosolvent at a moderate condition. It was shown that the NO₂‐PBI/PEI blends not only possess tractable processability owing to the enhanced solubility of NO₂‐PBI but also retain the desirable features of unmodified PBI/PEI blends. Apparent miscibility in the blends was observed and attributed to hydrogen‐bonding interactions between N? H groups in NO₂‐PBI and carbonyl groups in PEI. It was revealed that the NO₂‐PBI/PEI blends phase‐separate upon heating above the glass‐transition temperatures. The observed mixing of NO₂‐PBI and PEI in a molecular level, although sustainable only in the glassy region, was shown to lend synergy effects to the physical properties of the blends. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1778–1783, 2001     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Living radical polymerization of vinyl chloride initiated with iodoform and catalyzed by nascent Cu0/tris(2‐aminoethyl)amine or polyethyleneimine in water at 25 °C proceeds by a new competing pathways mechanism

The first example of living radical polymerization of vinyl chloride carried out in water at 25 °C is reported. This polymerization was initiated by iodoform and catalyzed by nascent Cu⁰ produced by the disproportionation of Cu^I in the presence of strongly Cu^II binding ligands such as tris(2‐aminoethyl)amine or polyethyleneimine. The resulting poly(vinyl chloride) was free of structural defects, had controlled molecular weight and narrow molecular weight distribution, contained two ～CHClI active chain ends, and had a higher syndiotacticity (62%) than the one obtained by conventional free‐radical polymerization at the same temperature (56%). This novel polymerization proceeds, most probably, by a combination of competitive pathways that involves activation by single electron transfer mediated by nascent Cu⁰ and degenerative chain transfer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3283–3299, 2003     

Melting behavior of poly(ether ether ketone) in its blends with poly(ether imide)

We detail the melting behavior of poly(ether ether ketone) (PEEK) and investigate its melting behavior in miscible blends with poly(ether imide) (PEI). The determination of the equilibrium melting point (T_m⁰) of PEEK is discussed by considering its inhomogeneous morphology. T_m⁰ is obtained by a long extrapolation of a Hoffman–Weeks plot to 384°C. Hindrance of PEEK crystal reorganization induced by PEI during heating is observed over the blend composition investigated (20–75 wt % PEEK). This behavior is correlated with the incorporation of PEI in the interlamellar zones of PEEK crystals. The interaction parameter χ of PEEK/PEI blends is estimated by the equilibrium melting point depression. This gives the interaction density B = ?1.2 cal/cm³, and x = ?0.40 at 400°C. © 1993 John Wiley & Sons, Inc.     

High-Temperature dispersion zones in cross-linked natural rubber

The complex dielectric constant of natural rubber samples cross-linked by sulfur and dicumyl peroxide has been measured over a frequency range from 1.5 to 3.0 × 10⁵ cps by the bridge method and from 3.0 to 1.0 × 10⁴ cps by the relaxation method. Two dispersion peaks were detected which lay in the measured frequency range at temperatures above the main dispersion zone. Temperature and cross-link density-dependent shift of these peaks were studied and compared with the results obtained by Ferry et al. from complex compliance measurements performed on analogous systems.