Cyanide-Free One-Pot Synthesis of Methacrylic Esters from Acetone

Methacrylic esters, represented by methyl methacrylate (MMA), are widely used as commodity chemicals. Here, the one-pot synthesis of methacrylic esters from acetone, a haloform and alcohols in the presence of an organic base is described. Using DBU as the organic base for the reaction of acetone, chloroform and methanol in acetonitrile afforded MMA in 66 % yield. When the solvent was replaced by benzonitrile, the product MMA was successfully purified by distillation. Applicability of this process to various alcohols was also investigated to show ethyl, phenyl, CF₃CH₂, and n-C₆F₁₃CH₂CH₂ esters were obtained in moderate yields. The use of bromoform instead of chloroform resulted in the improvement of the yield, for example, methyl and n-C₆F₁₃CH₂CH₂ esters up to 81 and 70 %, respectively. The reaction with deuterated starting materials acetone-d₆ and MeOH-d₄, with DBU in acetonitrile afforded deuterated MMA (MMA-d₈) in 70 % yield.     

Determination of residual monomers in acrylate dispersions by gas chromatography

The content of residual monomers is one of the most important characteristics of polymer dispersions. As a result of the similar physicochemical parameters of ethyl acrylate and methyl methacrylate, it is very difficult to determine the residual monomers in acrylate dispersions obtained by emulsion polymerization of both monomers. Gas chromatography with capillary columns, however, permits separation of these monomers and their quantitative determination in acrylate dispersions.     

含氧光敏引发体系的研究——Ⅵ.二苯酮/三乙胺体系引发光聚合过程中的再次引发效应

过去,作者曾发表了多种光敏引发体系引发烯类单体光聚合的工作,在研究2,2-二甲氧基苯乙酮在氧存在下引发甲基丙烯酸甲酯光聚合时,结合在聚合物链端的引发剂碎片具有光化学活性,在光聚合反应中产生高分子自由基,发生再次聚合,出现高分子量     

具可调光学性质的富勒烯聚合物

聚（Ｃ６０ 甲基丙烯酸甲酯）与聚（Ｃ６０ 苯乙烯）的ＴＨＦ溶液的透射光谱随浓度的增大而不断红移．这种异常的光谱位移可能与富勒烯的纳级（１０－９）簇的形成有关．用简单的办法来“调改”一物质的性质是科学家们长期梦寐以求的，而含Ｃ６０的聚合物正代表了这一群新奇的物质，它们的光学性质可以预期地和可逆地调变，只要简单改变一下浓度．     

过氧化苯甲酰的光敏电荷转移分解反应及引发甲基丙烯酸甲酯的聚合

过氧化苯甲酰(BPO)的光诱导分解曾为许多工作者所注意。Walling和Gibian认为:以二苯酮为敏化剂时,BPO的敏化光解是通过三重态的能量转移过程。Encinas和Lissi则认为敏化是通过单重激发态使激发能转移至过氧化物基态的热振动态,从而导致过氧化物的分解。Tokumarur是最早提出过氧化苯甲酰光敏化诱导分解过程中存在着激基复合物(Exciplex)的可能性。最近他们又进一步研究以BPO为猝灭剂去猝     

甲基丙烯酸三苯墓甲酯和甲基丙烯酸酯类的共聚物在溶液中的螺旋诱导和解旋作用

甲基丙烯酸三苯墓甲酯和甲基丙烯酸酯类的共聚物在溶液中的螺旋诱导和解旋作用陈传福，刘卫宏，陈永明，任长玉，习复（中国科学院化学研究所北京１０００８０）关键词甲基丙烯酸三苯基甲酯，甲基丙烯酸甲酯，光学活性，螺旋诱导，解旋在手性阴离子复合引发剂存在下，甲基...     

Copolymers of methyl methacrylate with some benzanthrone dyes, photo-stabilisers and their combined structures

Copolymerisation of methyl methacrylate with nine novel monomer compounds, triazinyl benzanthrone dyes, triazinyl benzotriazole stabilisers and their combined structures, was investigated. Chemical bonding of the compounds in the polymers obtained was confirmed spectrophotometrically. The quantity of the chemically bonded monomer compounds was determined to be over 50%, providing a colour and a fluorescence stable to solvents. Their influence on the rate of the copolymerisation was studied. It was found that the compounds under study did not significantly affect the rate of copolymerisation. A stabilizing effect towards photo-degradation of PMMA was achieved at 0.1 wt.% initial concentration of the compounds, which made them suitable for “one-step” colouration and stabilisation of PMMA.     

AIBN/SmCl3/乳酸体系催化甲基丙烯酸甲酯的反向原子转移自由基聚合

利用稀土金属化合物三氯化钐(SmCl3)和二氯化钐(SmCl2)之间的单电子转移反应,以AIBN/SmCl3/乳酸作为反向原子转移自由基聚合(ReverseATRP)的催化体系,成功地实现了甲基丙烯酸甲酯(MMA)的反向ATRP,并考察了温度、溶剂和组分比对聚合反应的影响.MMA在该体系中的聚合反应是一级反应,所得PMMA的分子量与单体转化率成正比,聚合物的分子量分布较窄(Mw/Mn<1.5),具有活性聚合的特征.     

Polymerization of MMA by oscillating zirconocene catalysts, diastereomeric zirconocene mixtures, and diastereospecific metallocene pairs

Characteristics of methyl methacrylate (MMA) polymerization using oscillating zirconocene catalysts, (2-Ph-Ind)₂ZrX₂ (X = Cl, 1; X = Me, 2), mixtures of rac- and meso-zirconocene diastereomers, (SBI)ZrMe₂ [3, SBI = Me₂Si(Ind)₂] and (EBI)ZrMe₂ [4, EBI = C₂H₄(Ind)₂], as well as diastereospecific metallocene pairs, rac-4/Cp₂ZrMe₂ (5) and rac-4/CGCTiMe₂ [6, CGC = Me₂Si(Me₄C₅)(t-BuN)], are reported. MMA polymerization using the chloride catalyst precursor 1 activated with a large excess of the modified methyl aluminoxane is sluggish, uncontrolled, and produces atactic PMMA. On the other hand, the polymerization by a 2/1 ratio of 2/B(C₆F₅)₃ or 2/Ph₃CB(C₆F₅)₄ is controlled and produces syndiotactic PMMA. Mixtures of diastereomeric ansa-zirconocenes 3 or 4 containing various rac/meso ratios, when activated with B(C₆F₅)₃, yield bimodal PMMA; this behavior is attributed to the meso-diastereomer that, in its pure form, affords bimodal, syndio-rich atactic PMMA. For MMA polymerization using diastereospecific metallocene pairs, rac-4/5 and rac-4/6, the isospecific catalyst site dominates the polymerization events under the conditions employed in this study, and the aspecific and syndiospecific sites are largely nonproductive, thereby forming only highly isotactic PMMA.     

Methyl methacrylate polymerization at samarium(II)-grafted MCM-41

Sm(II)-modified periodic mesoporous silica (PMS), Sm[N(SiHMe₂)₂]₂(THF)_x@MCM-41, was used for the synthesis of Sm(II) alkyl, alkoxide, and indenyl surface species via secondary ligand exchange. The performance of the novel Sm(II)-based organometallic–inorganic hybrid materials as initiators for the graft polymerization of methyl methacrylate (MMA) is reported. All of the Sm(II) hybrid materials including the new PMMA–PMS composites were characterized via N₂ physisorption, elemental analysis, FTIR spectroscopy, and scanning electron microscopy (SEM). The organic–inorganic composites revealed complete pore blockage as well as enrichment and strong adhesion of the polymer at the exterior of the porous silica material.